Paint Shop Pro :: Pasting Acrobat Snapshot In X4
Jun 25, 2013
I have a problem pasting an Adobe Acrobat snapshot as new picture in PSP4. Pasting it directly e.g. to MS Word works fine, but I would need some of the snapshots also as a jpg file.
I use the Adobe Acrobat X (ver 10.1.2) Standard snapshot tool to copy a picture and then try to paste it to PSP4 as new image. The result is every time the same: about 7 mm slice from the right is moved to the left side of the image. See attachment.
The attached file is an example showing 7 mm slice from right side of the image on the left side.
View 4 Replies
ADVERTISEMENT
Nov 23, 2013
Bought x6 a couple of weeks ago together with a new Windows 8.1 and 64 bit pc. I get a problem when I paste part of one image into another one. If I want to move it or enlarge/decrease the pasted part, it freezes or only part of it appears. However, if I then click on the composed image and reduce the size a bit, the pasted part appears ok. Nuisance as it slows the process down and should not be happening. as this never happened with X3 running on Windows 7 32 bit?
View 6 Replies
View Related
Sep 30, 2011
PSP 4x. when I "copy" an image from the web or other program and paste as a new image or any other option, it pastes "offset" That a piece of the image is cut off the right side and shows on the left as though it was a wrap around. This does not happen in PSP3x Must be some adjustment but cannot find.
View 5 Replies
View Related
Dec 1, 2011
Pasting from Clipboard problem.
Did a screenshot JPG
Right clicked it and copied it (Win7-64 clipboard).
Started PSPX4 SP1.
Cannot paste .. paste options greyed out.
So I drag/drop the jpg into X4-SP1 ... works ok.
Also, opening the file in X4-SP1 works ok.
Tried another Copy/paste with another app .. PaintDotNet.
Pasted from Win7-64 clipboard ok.
Plug Ins and tablet installed.
KPT filters
NIK Color Efex Pro 3.0
Wacom Intuos4 Tablet
View 13 Replies
View Related
Mar 1, 2012
Recently, had to stop using Corel PhotoImpact, since Corel stopped supporting it. Switched to PaintShop Pro X4
Running Win 7 64 bit, Office 2007
I have to repeatedly copy and paste from PaintShop Pro X4 into Word 2007.
When I choose the default paste, the pictures are fuzzy in Word
1) this is not a problem with other programs, such as Irfranview, as the source, instead of PaintShop Pro X4.
2) if choose "Paste Special" in Word-->bitmap, pictures are sharp. It is the default paste that is the problem.
3) I do not want to have to use "Paste Special" all the time
This is rather odd, to say the least. Why should the same image captured by the Windows clipboard from PaintShop Pro X4 vs Irfranview behave differently when pasted into Word 2007?
View 3 Replies
View Related
Aug 13, 2011
Using the below steps causes a string of pixels to delete, and forum I visited [URL]..... with similar issues think it's a bug in PaintShop Photo Pro X3 13.0.0.253. I now have version X3 - 13.2.1.20 after updates.
1. Start a new image, with solid background.
2. Selection tool, rectangle, add/shift, feather 0, anti-alias on.
3. Draw out a 3" rectangle. Flood fill or paint in the shape with a solid contrasting color. Leave shape selected.
4. Go to Edit, Copy.
5. Go to Edit, Paste as transparent selection.
6. Place the copy to the right and up against the first shape.
7. Go to selections, Select None.
Take note that there is a string of pixels that is being removed. The above steps were posted by my peers in the PaintShop Photo Pro community forum I mentioned above.
What I’ve been trying to do is Paste As New Selection from one image into another, and pixels are cut off once I click to release the selection. I’ve tried different things, like expanding the canvas of the pasted image, and other things, but nothing has worked.
View 2 Replies
View Related
Sep 16, 2011
I don't have photoshop and all the instructions say to save the transparency directly to pdf in photoshop. Saving to gif, tiff, png and opening as a stamp in acrobat or copy and pasting the transparency from paint.net into acrobat always removes the alpha channel.
View 2 Replies
View Related
Dec 22, 2011
I have an image jpg, i want to add another person in the pic from another pic and be able to resize the pic I pasted. can u tell me what steps to take/ been going crazy trying to do this. As u can tell a new user.
View 2 Replies
View Related
Nov 18, 2013
If I have two images, one is a texture map and the other is a normal map, how do I essentially paste the normal map into the alpha channel?
The stuff I am importing into (OpenSimulator) uses a single image to put texture and normal map information onto an object but so far I can't see anywhere to create the alpha channel.
I am not using the alpha channel for transparency, which seems to be a source of confusion (elsewhere). The thing is I CAN use it for that (transparency I mean) simply by making part of my image transparent (This is splendid by the way, and is yet another reason why I adore Paint.Net), this implies to me there are alpha channels or that the transparency thing is something different.
View 6 Replies
View Related
Mar 2, 2013
I have two pictures and I try to copy a small part of one picture to the other.I did a rectangular selection of 2 cm square of the first picture and copied it but when I pasted it in the other picture the selection was now 4.68 cm square.
I suspect that's because the two pictures have not the same resolution. How can I keep the size of the selection from two pictures of different resolution?
View 1 Replies
View Related
Mar 13, 2012
1. I have created a rectangular selection
2. I have rotated it with right mouse button pressed.
3. I want to copy&paste selection as the new picture, but I need to rotate manually selected image part before that to fit into new canvas exactly.
Is it possible for the result to be autorotated to fit rectangular canvas?
View 3 Replies
View Related
Dec 24, 2011
Just came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies
View Related
Oct 28, 2011
I installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies
View Related
Sep 25, 2012
Is there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies
View Related
Apr 9, 2011
My program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies
View Related
Aug 20, 2011
if is possible to create the paint drips in the attached design. I really want to learn how to create urban designs, is corel paint shop x3 suitable for that?
View 2 Replies
View Related
May 15, 2012
I want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
View 3 Replies
View Related
Jul 24, 2006
Does setting preference to make a initial snapshot help? I've been doing some testing and can't see any benefits from it. It seems I can always select the open history state to revert back to the beginning.
View 3 Replies
View Related
Jun 30, 2011
Whenever I try and take a UV snapshot of a set of UV's in Maya 2012, I get the following error message: // Error: Failed to open output file: C:UsersFraggerDocumentsA Work FilesVisualisationsimagesYellowBucket.*.tif
This has happened every time I try to take a UV snapshot in 2012, but it never happened on any of the earlier versions.
BTW, I'm not a tech savvy person so small words
View 5 Replies
View Related
Oct 27, 2011
How do I paste a graphic over an existing graphic on a header? and how do I determine the amount of pixels to be covered and the amount of pixels in the graphic I am wanting to use?
View 3 Replies
View Related
Jul 23, 2013
How do I do a composite snapshot using Photoshop CS5. I know it can be done in CS6 using Control + shift + alt + E. I am not having any luck using those shortcuts in CS5.
View 1 Replies
View Related
Feb 5, 2013
I work for a school district that uses VideoStudio X4 in their High School lab. We are in a Windows Domain where each student logs in using their own user ID and password to a Windows XP Pro computer. When a Student logs in and uses VideoStudio, Take a Snapshot does not work. If I log in as an Administrator that feature works. So there is a file permissions issue - but I can not find which file/folder I need to give the students rights to. I have given the Corel folder in the Programs folder Modify rights. I also have given the Corel folder in the All Users | Documents and Settings | Application Data (hidden) folder Modify rights. Neither change has worked.
View 1 Replies
View Related
Feb 23, 2014
Inside the A/E CC, The small Camera Icon that Is to take Snap-Shots, Where dose It Save the Snap-Shots ?I do see the Icon for show Snap-Shots but I don't see any.
View 5 Replies
View Related
Jul 23, 2013
How do I do a composite snapshot using Photoshop CS5. I know it can be done using CS6, but am not having any luck using Control + shift + alt + E?
View 1 Replies
View Related
May 10, 2011
Im looking for the keyboard command to "take a snapshot".
Im trying to take snapshots in capture mode/full screen, without minimizing then clicking the button.
View 10 Replies
View Related
Feb 28, 2008
How do we take snapshot like a ichat window on the desktop and then importing it into photoshop?
We saved a ichat window, but it did not import into photoshop because photoshop did not recognise the format it was in.
View 3 Replies
View Related
Apr 17, 2013
I have also added the path controller and have animated some rotations (Z axis only for now) as the assembly goes around the path.
My question is - I can duplicate the assembly via the snapshot tool easily enough and they all follow each other as expected...but how can I now copy my previous set up animation onto the new cloned assemblies?
Is there a way to copy and paste the original animation - then either time shift via the curve editor or % on path controllers?
View 3 Replies
View Related
Jun 20, 2012
I'm struggling in Photoshop with a large number of scanned B/W photos from the '50s and '60s with wide areas of dust and scratches. Dreading the prospect of tedious cloning or healing, I googled for "Dustbusting 101 in Photoshop".
Make a copy of the background layer, select this layer, go to FILTER > NOISE > DUST & SCRATCHES. Set the Threshold to 0 and increase the radius setting until most of the scratches and dust disappear. Add some noise to this layer so that it closely matches your original image. Use this layer to "paint" in the dust and scratches, to do this make sure this background copy is still selected, go to EDIT > TAKE SNAPSHOT. Then select the original background and turn off the background copy layer. Click on the cloning tool and in the options box choose FROM SNAPSHOT. If the dust or scratches are light use the DARKEN MODE for the cloning tool (this will only fill in the light areas and will not affect the other areas of the image). If the dust or scratches are dark use the LIGHTEN MODE for the cloning tool and go over these areas. For this technique you should use a small brush size, although it is tempting to rush through it using a large brush."
I am stymied when I get to the part which says: "... Click on the cloning tool and in the options box choose FROM SNAPSHOT. ..."
View 8 Replies
View Related
Oct 15, 2012
I'm developing a VB.NET framework 4.0 that must works with Inventor 2013 and Vault.
My *BIG* problem is to obtain a simply image (bmp, jpeg, whatever you want) of the ActiveDocument in Inventor when the user add the file inside Vault (VaultCheckinTop) - my goal is to create a detail technical pdf report and store it in our database.
I'm able to create ALL (get iProperties, etc) but i cannot take a snapshot of the ActiveDocument.
I've tried both Apprentice way and ClientView way registering the old-know "InventorThumbnailViewLib", without success.
I cannot (and i don't want!!) use the VisualBasic.Compatibility method because it's ultra-deprecated, and i cannot use too the VBA scripting because my application it's create in VB.NET.
replicate in "silent mode" at runtime the "Export to Immage" command of Inventor.I have read all similar post found on the net, without success
[URL]
My scenario is: VS2K10 - Framework 4.0 - Windows 7 @ 64bit - Inventor 2K13 @ 64bit with Update 2 - last DeveloperTool @ 64bit
View 2 Replies
View Related
Jul 29, 2013
I can't find the button to create Desktop Snapshot like you can in Flame Premium. Is it there or do I need to save my Desktops differently.
View 1 Replies
View Related
Feb 8, 2013
Is it possible to save snapshot cfx in Smoke 2013 on mac or is it only on Linux version?
View 2 Replies
View Related
