I'm new to PSP and trying to fathom out tube transfers. In my tube folder there are quite a few tubes, but mainly on sheets of say 12 or more individual tubes.
How can I take one of those tubes from the sheet of say 12, because at present if I try to bring a tube into PSP, the whole sheet comes in.
I have lots of picture tubes from an old version of PSP. I now have PSP X5. What is the correct format for the pictures? I have both psp and tub.
View 2 Replies View RelatedI am having trouble getting my tubes to show up in the Tube tool drop down box. If they are downloaded with the .tub extension they show fine. But if the need to be converted they don't work. I've tried 2 different converter programs and couldn't get them to work.
I used PSP5 a long time ago and used a converter that worked great. Now can't seem to get anything to get my downloaded tubes to register in my Tube Tool .
Such as preset shapes? I downloaded all kinds of content in X5 but it does not show up in X6.
View 2 Replies View RelatedJust came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies View RelatedI installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies View RelatedIs there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies View Relatedhow to make CURVED plastic and/or glass-looking pipes?In case I've been unclear, I am referring to those like the ones in the VB Skins Banner above, or those found on the left side of the TeamPhotoshop homepage (not to be confused with the Forum mainpage)I looked all over google, using tons of keywords, including 3d, glass, plastic, tubes, pipes,curved, and so on.
View 10 Replies View RelatedI have a little bit of skills with cs. I want to know if anybody out there knows how these glasslike tubes were made. Photo or Photoshop or what. I pretty much just want to try a few things with this style.
View 9 Replies View Relatedhow to do an image.
I really like those metallic shiny tube things,
My program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies View Relatedif is possible to create the paint drips in the attached design. I really want to learn how to create urban designs, is corel paint shop x3 suitable for that?
View 2 Replies View RelatedI want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
I often have trouble bending shapes with nice gradients, typically a tube on technical concept drawings
I'm using a workaround of adding lines on top of each other with gradually brighter colours feathered but it's not really elegant and there are issues at the end of the lines.
How would you this if I want to keep the nice gradients and the tube needs bending?
I am try to place some tubes on outside of a drum by coding like below
Private Const DrumDia = 3000
Private Const DrumHt = 5000
Private Const StubLen = 200
Dim StubLoc() As Integer = {1000, 1500, 2000, 2700, 4000, 4800}
Dim AngLoc() As Integer = {30, 45, 60, 190, 270, 30}
[URL]
Actually a face problem in one Line of code only
Call oMatrix.SetToRotation(AngLoc(value), oTrans.CreateVector(0, 0, AngLoc(value)), oPoint2)
I need to find out how to make those Glass/Plastic looking tubes like the one on this sites homepage. Not the Forum main, but the Team Photoshop homepage.
I can Make them by hand, but time is of the essence, so shortcuts would be great.I know they're a little, um... Passe, but I think they'd can make them work on a project I need done TOMORROW.
I am modelling a Domestic Pump with tubes hanging out of them (I've made the model of the pump itself already), the tubes themselves is what I want to animate.
how to make the tubes using the Line Tool and increasing the thickness which would result a nice long tube However my problem is, is that how do I get to have the Line (or Spline?) directly attached to a certain point on my Domestic Pump model to make it look like it's part of it and moves along with it (and not having to keyframe it's movement precisely and all the time)? in addition, to animate it afterwards as well without it being detached from it.
If any of you are having difficulty imagining what I'm talking about, think of it as a Hoover (Vacuum Cleaner) with a Hose Pipe that needs to move freely through the use of a
I am working on a lisp that automaticaly draws some tubes and fittings.First the user has to select the block where the tubes start and then he selects where the tubes has to end.Herefor i whrote this lisp..
(defun c:test () ;;------------=={ Set Dynamic Property Value }==--------------;;;;;;;; Modifies the value of a Dynamic Block Property ;;;;-------;;;; Author: Lee Mac, Copyright © 2010 - www.lee-mac.com ;;;;---------------------;;;; Arguments: ;;;; block - VLA Dynamic Block Reference Object ;;;; prop - Dynamic Block Property Name ;;;; value - New value for Property ;;;;------------------;;;; Returns: Value property was set to, else nil ;;;;-------------------;;(defun LM:SetDynamicPropValue ( block prop value ) (setq prop (strcase prop)) (vl-some (function (lambda
[code]....
Is it posible to show the user how the tubes gow befor chozing the second point?(A litle bit like when you stretch a dynamic block where you can see how the object will look like while preforming the stretch action).
Is it possible make end treatments to round tube that it will fit round tube, end of the tube isn't straight like in the picture?
View 9 Replies View RelatedI have a tube steel frame and need to show weldments between the tubes except for the inside fillets. I then need to show sanding the welds flush. Also I need to show a rounded edge where the mitered point meets the outside edge of the tube beside it. I'm very new with inventor Attached is my curret drawing file.
View 1 Replies View RelatedI'm trying to make a part of different tubes by sweeping circles along lines. However one side of the part joins correctly, but other not. I'ill add photos of correct smooth join and uncorrencly unsmooth.
View 3 Replies View RelatedI am trying to get a 30 and 45 degree mitered shape on the end of cylindrical tubes (hollow and solid tubes).
View 5 Replies View RelatedOk, either I am totally loosing it, or it just ain't happening.
I cannot get the Nik HDR module to work with my PSP X5
It's installed, it shows up in my Effects menu, but it only imports one of the photos I have opened in my edit tab.
What am I missing??
Using PSPP X3 Ultimate.
I have some Tif files and jpeg files that are 600dpi and 400dpi. I scanned these images with my Canon CanoScan LiDE 700F scanner. Can i use my version of PSPP X3 Ultimate to change the dpi value? Is this stuck? I wanted to be able to get the 600 and 400 dpi image files (I have some 300dpi's too) down to the 100-250 range if I needed to. I see there are different export options and compression in PSPPX3Ultimate, but I'm not sure if this will do what I want.
I want to export as Tif and Jpeg again.
Are there any good third party photo and or video editors that I can batch edit this with? It's ok to mention pay programs and I'd prefer good quality freeware if there is such a thing. I am sure that my Corel program can do the trick though. I just don't know how and don't want to rescan multiple dpi's every single time. I only need the archives and then get the smaller dpi when needed.
I was using a trial version of paint shop pro x5 and still had 11 days left of my trial when it suddenly stopped working. When I click on the icon to start paint shop pro it starts up and then freezes every time when it is loading in the spot that says "initializing color swatches".
I haven't changed anything on my computer- it just suddenly stopped working. I uninstalled it and tried reinstalling it, I also tried restoring it.
I installed PaintShop Pro Ultimate X3 several months ago. It worked fine initially, but then stopped running and gave me an error message pertaining to a language error. In an effort to fix the problem, I have completely uninstalled the application and removed all of its registry entries. I then reinstalled the program, which appeared to be successful, however, now it simply will not run and gives no error message whatsoever. When you click the desktop icon, it tries to load momentarily, then does nothing more.
I have removed my virus protection and my User Account Control.
What is the best method to upgrade from X3 to X5...should I remove X3 first for example?
View 2 Replies View RelatedDuring preparing a collage, when I try to save the project, I receive the the message that I don't have enough memory.I am using windows 7 and as far as I know, I don't have memory problems. I am working a lot with VideoStudio x4 without any problems.
View 5 Replies View RelatedI would like to add some Plugins to PSPPX3, I read/understand i should add the Plug-ins path at Preferences>File Location>Plug-ins - But there is no such option or Preferences>Workspace>Plug-ins - Same story
There was also no Plug-ins map or Workspace map in: C:Program FilesCorelCorel PaintShop Photo ProX3PSPClassicLanguagesNL
I installed PSPPX3 today, and i updated it and downloaded patch 1-4. How / where to install plugins?
When I open a jpeg in X4 it always says it is at 72 dpi. Even when I resize it so it is at 220, when I open it again and look under image information it always says 72 dpi. If I open the same image in any other editor, including X3 it reports the correct dpi. This coupled with the extreme compression is making X4 useless to me unfortunately.
I'm not prepared to sit and do the math to try and figure out what it is really at.
I have reset the number under preferences/general program preferences/units and it doesn't respond to that either.
For me, this version is problematic and not worth taking the time to learn. I need to be able to depend on and trust the information I'm getting from my software.
I normally upgrade every other version. I currently use X2 on a Windows XP computer. My primary uses are photo editing. My key interests are:
- processing 16 bit per color files
- use of layers and blends
- stereo photography (combining and aligning stereo pairs)
- use of various tools such as cloning and healing.
- Color management and Printing
Reviewing the product page, I haven't really found anything that shows a list of upgraded or added features. Most of the things mentioned appear to be in X2 already. Looking at the thread calling for future features, it appears that the things missing are still missing. X2 is serving me well, but there has to be some reason to upgrade?
