I have a little bit of skills with cs. I want to know if anybody out there knows how these glasslike tubes were made. Photo or Photoshop or what. I pretty much just want to try a few things with this style.
View 9 Replieshow to make CURVED plastic and/or glass-looking pipes?In case I've been unclear, I am referring to those like the ones in the VB Skins Banner above, or those found on the left side of the TeamPhotoshop homepage (not to be confused with the Forum mainpage)I looked all over google, using tons of keywords, including 3d, glass, plastic, tubes, pipes,curved, and so on.
View 10 Replies View Relatedhow to do an image.
I really like those metallic shiny tube things,
I need to find out how to make those Glass/Plastic looking tubes like the one on this sites homepage. Not the Forum main, but the Team Photoshop homepage.
I can Make them by hand, but time is of the essence, so shortcuts would be great.I know they're a little, um... Passe, but I think they'd can make them work on a project I need done TOMORROW.
I'm new to PSP and trying to fathom out tube transfers. In my tube folder there are quite a few tubes, but mainly on sheets of say 12 or more individual tubes.
How can I take one of those tubes from the sheet of say 12, because at present if I try to bring a tube into PSP, the whole sheet comes in.
I often have trouble bending shapes with nice gradients, typically a tube on technical concept drawings
I'm using a workaround of adding lines on top of each other with gradually brighter colours feathered but it's not really elegant and there are issues at the end of the lines.
How would you this if I want to keep the nice gradients and the tube needs bending?
I have lots of picture tubes from an old version of PSP. I now have PSP X5. What is the correct format for the pictures? I have both psp and tub.
View 2 Replies View RelatedI am try to place some tubes on outside of a drum by coding like below
Private Const DrumDia = 3000
Private Const DrumHt = 5000
Private Const StubLen = 200
Dim StubLoc() As Integer = {1000, 1500, 2000, 2700, 4000, 4800}
Dim AngLoc() As Integer = {30, 45, 60, 190, 270, 30}
[URL]
Actually a face problem in one Line of code only
Call oMatrix.SetToRotation(AngLoc(value), oTrans.CreateVector(0, 0, AngLoc(value)), oPoint2)
I am modelling a Domestic Pump with tubes hanging out of them (I've made the model of the pump itself already), the tubes themselves is what I want to animate.
how to make the tubes using the Line Tool and increasing the thickness which would result a nice long tube However my problem is, is that how do I get to have the Line (or Spline?) directly attached to a certain point on my Domestic Pump model to make it look like it's part of it and moves along with it (and not having to keyframe it's movement precisely and all the time)? in addition, to animate it afterwards as well without it being detached from it.
If any of you are having difficulty imagining what I'm talking about, think of it as a Hoover (Vacuum Cleaner) with a Hose Pipe that needs to move freely through the use of a
I am having trouble getting my tubes to show up in the Tube tool drop down box. If they are downloaded with the .tub extension they show fine. But if the need to be converted they don't work. I've tried 2 different converter programs and couldn't get them to work.
I used PSP5 a long time ago and used a converter that worked great. Now can't seem to get anything to get my downloaded tubes to register in my Tube Tool .
I am working on a lisp that automaticaly draws some tubes and fittings.First the user has to select the block where the tubes start and then he selects where the tubes has to end.Herefor i whrote this lisp..
(defun c:test () ;;------------=={ Set Dynamic Property Value }==--------------;;;;;;;; Modifies the value of a Dynamic Block Property ;;;;-------;;;; Author: Lee Mac, Copyright © 2010 - www.lee-mac.com ;;;;---------------------;;;; Arguments: ;;;; block - VLA Dynamic Block Reference Object ;;;; prop - Dynamic Block Property Name ;;;; value - New value for Property ;;;;------------------;;;; Returns: Value property was set to, else nil ;;;;-------------------;;(defun LM:SetDynamicPropValue ( block prop value ) (setq prop (strcase prop)) (vl-some (function (lambda
[code]....
Is it posible to show the user how the tubes gow befor chozing the second point?(A litle bit like when you stretch a dynamic block where you can see how the object will look like while preforming the stretch action).
Is it possible make end treatments to round tube that it will fit round tube, end of the tube isn't straight like in the picture?
View 9 Replies View RelatedI have a tube steel frame and need to show weldments between the tubes except for the inside fillets. I then need to show sanding the welds flush. Also I need to show a rounded edge where the mitered point meets the outside edge of the tube beside it. I'm very new with inventor Attached is my curret drawing file.
View 1 Replies View RelatedI'm trying to make a part of different tubes by sweeping circles along lines. However one side of the part joins correctly, but other not. I'ill add photos of correct smooth join and uncorrencly unsmooth.
View 3 Replies View RelatedI am trying to get a 30 and 45 degree mitered shape on the end of cylindrical tubes (hollow and solid tubes).
View 5 Replies View RelatedVersion: Photoshop CS (1)
Computer: Pentium 2.4 gHz dual core
4 Gigs Ram
Nvidia 7950 video card Win XP Home
I started to get this strange error with my Photoshop when making a new document in Photoshop and got the following error: "cannot initiate Photoshop because Photoshop cannot create any more windows".
I thought the easiest thing to do would be to reinstall (Photoshop needs reinstalling extremely often unfortunately), but now when I try and open the program it just give an alert beep and closes back up. Even though I rarely use ImageReady, I opened that up to check and it does the same behavior.
Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
View 1 Replies View Relatedwhen I got my first Macintosh IICX and all of my MacPaint clip art. I don't want to get rid of the clip art because since I'm still using a black ink printer and not upgrading to a color one, the clip art looks nice in newsletters and the like.
Up until this time I had been using SuperPaint which had the New Superbits editing plug-in to refine the pictures so they had the smoother and cleaner lines instead of looking jagged. With my new computer and printer, I'm also getting Photoshop CS packaged with Adobe Creative Suite Premium, which I have never used before. Since I have not received my order yet, I was wondering if anyone could tell me whether Photoshop has the capability of improving the older MacPaint clip art like SuperPaint did with the New SuperBits editing plug-in. Over the past two days, I have been trying like crazy to back-up my pictures with SuperPaint and then re-saving them with Graphic Converter. It's been so incredibly slow that I thought I would go ahead and ask you, the experts, if Photoshop can also improve the quality of my older MacPaint clip art or if I should continue to back-up my clip art like I have been doing.
I have just got back from the Elbow gig and pulled the images off the card. They load up in Bridge but don't have actual picture thumbnails. They are named correctly, ie: IMG_3483.CR2 but they won't open!? Error message says 'Could not complete your request because Photoshop does not recognise this type of file'
I could see them on the back of the camera.
mac users... i did a software update the other day and I noticed that there was an update for ACR. Could it have been something to do with that? And why can't I find ACR in my Applications?
I use Photoshop Elements 11. I am trying to upload photos to a website and the browse only goes to Windows/Pictures. How do I navigate to photoshop to upload pictures there?
View 3 Replies View Related of Adobe Photoshop v6.0.1 (quite old, I know, but it do all I want and on my old HW I did not plan/want to use any more recent version, because they are HUGE and with just a little preferences trick, I did not need to reinstall my PS - ever ), yet as Czech user, I need my software to type some special characters as well. These are looking like this:
[URL]...
Now the only problem is, that some of them PS just refuse to type. Seven small and seven caps are just wrong. See the line "for PS:"...
I battled the problem even by editing the fonts itsels, because that seems to work with Adobe Illustrator, yet this also cause the edited fonts to be useless in another programs. So I looked deeply and in the Adobe settings in directory Fonts / Reqrd are directory CMaps and perhaps editing the character map used will be better and usable solution? how to do it or even determine with file from the 96 files in the CMaps directory are right now used by Adobe Photoshop?
Everytime I open my CS6, it always show " Could not initialize Photoshop because the preferences file was invalid (it has been deleted)" I reinstalled it but it is still popping out.
View 10 Replies View Relatedwhen I try to save a tagra file with a alpha channel in photoshop 7 the box for the alpha channel is greyed out, with an warning sign next to it, and the line below stating "file must be saved as a copy with this selection" When I examine the saved file the alpha channel is not there!
Has anybody got any idea why?
My old version of photoshop 6, allows you to save alpha channels!
the soft edge feature of the eraser and the brush no longer work. I can go into the pallet and choose a soft edge eraser or brush, but it comes up hard edge. When I try to use the marquee box with a feather to get a soft edge, I again get a hard edge. I've used this technique a lot, so I think I'm doing the method properly. I have removed the preference files a number of times and have trashed the old Photoshop and reinstalled Photoshop 3 or 4 times,
View 2 Replies View RelatedI am working on someone elses computer and the Software settings are different. The old owner does not use this computer anymore. The swatches are set and I would like it to function how it usually does, etc. I mean, even the transparent swatch on the tool bar is not there anymore, so when I use the pen path tool, I get these white and black fills which makes it difficult for me to see the path I am meant to be following.
How do I reset Photoshop so that I can customise it the way I want it? Reinstalling the softwares is not an option.
I would like to reset Illustrator, Indesign, Dreamweaver, etc.
I'm having trouble with my zoom tool. If I have multiple Photoshop windows open, when I go to either zoom in or out of the top window... ALL the other windows mirror what's happening to the top window.
View 5 Replies View RelatedI am having in Photoshop CS2. I have had CS2 for over 2 years and have never had this problem. I am not able to open Photoshop CS2. I am getting a message that reads "Could not initialize Photoshop because a required resources text file is missing. It goes through a series of " could not load default contours, styles, custom shaphes because the file could not be found" before getting to the "initialize" window.
View 3 Replies View RelatedI scanned a picture on Microtek scanner and was tranfering it to photoshop when I saw photoshop embeded profile mismatch that has use the emdeed profile or covert document's color
in the working space or discard the emdeed profile. which embeded profile do you use for the photos? I attached the shot of the embeed profile from photoshop.
After scanning and opening a paper doc in Photoshop the image is distorted- ie its because i usually scan photographs for manipulation, i know this is due to scanner settings but i don't know how to change them there.
View 2 Replies View RelatedI have to build a website named Hollywood Movie Wallpaper . I've already gotten the pages done using adobe photoshop. This means that I know exactly what I want on each page and I've done the whole page by adobe photoshop. However, most website host needs the file to be in html in order for it to appear on the web. Is there any way to change an adobe photoshop image into a html file without changing the layout or anything? Coz it was hard work designing the layout and inserting the content into adobe photoshop image.
View 4 Replies View RelatedA co-worker needs to be able to access certain files that I have created in Photoshop CC. These files are saved as TIFFs, and as part of my workflow, I have just about everything in Groups. She currently has Elements 10 on her system, but that absolutely does not permit access to the Groups and the components within. Because of her job duties, I cannot necessarily justify adding her to the CC account since she does not need PS, AI, ID, or any of the other applications as I do. However, I can easily justify upgrading her to Elements 12...provided it does what we need it to.
View 1 Replies View Related