Search bar is returning zero results, and google did me no better..I am having trouble with images saved in 8-bit bmp format from paint.net not rendering properly with software that requires a 'windows format bmp' file.
how to save 'windows format bmp' with paint.net?
I have created a Photoshop file for a brochure I'm sending for print in my windows photoshop. My printer is on a Mac and I'm needing to know if they will be able to open the .psd files I have so if there is any adjusting needed they will be able to do it.
View 2 Replies View RelatedI recently downloaded Photoshop for Windows and now have switched to a Mac. Is there anyway I can switch my product registration or download over from a windows to a Mac format? and is there a cost involved, or do I need to start again?
View 2 Replies View RelatedIs there any way to save/open files in Adobe products using the general Windows format, i.e. where you could copy & paste a folder location into your address bar. I work on multiple projects across a complex network and I have to manually navigate through all the folders each time, and I can't copy & paste a location like I could if I was browsing through Windows normally. Also you can't save favorite locations?
View 3 Replies View RelatedMy primary graphics tool is Paint.Net, but I have found an inadequacy for what I am doing.
Paint.NET copies data to the clipboard in the following formats
PaintDotNet.MaskedSurface
Format17
System.Drawing.Bitmap
Bitmap
DeviceIndependentBitmap
found by examining data.GetFormats() in C#. I cannot use PaintDotNet.MaskedSurface in my application and the others don't provide full transparency information for PNGs. Is there a way to have Paint.NET copy data to the clipboard using "PNG" format?
In my app, I can copy an image into the clipboard using the following code, and all transparency information is retained.
using (MemoryStream stream = newMemoryStream())
{
_Bitmap.Save(stream, ImageFormat.Png);
var data = newDataObject("PNG", stream);
Clipboard.Clear();
Clipboard.SetDataObject(data, true);
}
and I can read the same from the clipboard using the following
IDataObject data = Clipboard.GetDataObject();
if (data.GetFormats().Contains("PNG")){
MemoryStream ms = (System.IO.MemoryStream)data.GetData("PNG");
_Bitmap = (Bitmap)Bitmap.FromStream(ms, true);
}
I've been working with needs to be able to use RLE formatted BMPs... unfortunately, simply changing things to 256-color BMPs doesn't work (it shuffles the colors for some reason), and I can't just use the vastly superior PNG due to how the software works.
Any plugins that allow me to work with RLE formatted BMP?
I have a png file that is already in rgb565 format. On Paint.Net, i changed this image by completely deleting the background.
What format would this image now be considered to be in?
I'm new to Paint.net.
Until recently, I was using the paint app of Windows 7. However, the office changed my laptop to a PC running Windows XP SP3.
I do a lot of documentation work and part of my job requires me to save screenshots for posterior use in product manuals.
My situation is this:
I have to save in .bmp format (office policy) and, by default, Paint.net saves in .png format.
Is there any way to set the Save default format to .bmp or any other format?
Secondly, when I save a file that contains a period in its name (for example "ch2.p16" - chapter 2, page 16), it will save the file but not in the format selected. Instead, Paint.net assumes that anything after the period is the file extension. Thus, the file is saved as "ch2.p16" with a file type of "p16".
Is there any way to bypass this glitch other than having to avoid using periods in the file name? (I've attached an image)
.pdn is format for working project. Sometimes to some elements in workspace need to add extra metadata(ex.: font style and size, another example - in case of color with alpha - thectly color definition, in some cases - describe object relation.)All this stuff exist in adobe reader. All what need - copy functionality to Paint.NET.
View 4 Replies View RelatedI was in the process of making a banner for my own webcast, but I'm getting frustrated for clearing the background so that a floating banner near the bottom of the screen during the webcast/recorded show.
I've been saving/deleting/experimenting with tolerances so that the background is clear so it appears to float on screen (no effects, just a banner). I've done everything I can to get a clear background, but have been failing miserably, and i couldn't seem to find anyting in relation to this.
The screen size I'm going to be working with is 640x480. The banner I'm creating is 640x100 for the banner. I've also been keeping the Save Configurations to 8-bit so it doesn't effect (I could be very wrong about this too, though) video quality (atleast that I know of).
Here's an example of what I would like to do. . .
Instead of keeping the MF logo restrained in the border, I've been wanting to let it overlap over, but doing that I would get either black or white background, depending on the tolerances that I delete off, and as a PNG file.
I need to convert a PNG image to an icon in Windows icon format.Can I do that in XDP7?
View 9 Replies View RelatedHow do you save an image to PDF format?
View 2 Replies View RelatedI'm still using PSP X3. What format more knowledgeable people for me use for editing images.
In the past, I'd take the jpeg produced by my camera, convert it to PSP format, and then when finally finished, save it as jpeg again.
I understand that the PSP format is no longer used, so should I just work in jpeg format? My understanding is that any intermediate saving would compromise image quality; if not jpeg, then what?
I made some changes to a photo and when I went to save the changed photo(save as) in JPG format I get an error writing file to drive, no explanation and it wiped out my original photo on the drive.
View 2 Replies View RelatedHave been running the trial version of Lightroom 3.6 for the past three weeks. I see that it cannot handle or display PNG format, of which I have over 11,000 images. PNG is my primary WORKING format for single layer images due to its lossless compression, support for EXIF data, and transparency later. Lightroom creates tens of thousands of tiny folders and catalog files that are difficult to defragment and greatly complicate my routine backups. I must comment that Adobe filters, especially Noise Reduction are really great but the lack of PNG support is a show stopper.
Also ran Lightroom Synchronize to add recent photos to the Canon folder and for some reason it changed the date stamp on over 3 GB of photos to the present day. When I went about a routine backup of the photos, the backup software wanted to completely overwright all the files with TODAYS date on the MyBook drive!! What? no way. So now I must RESTORE all these files BACK to the original date stamps. This is way over the top. Plus Lightroom is very slow to complete the Sync task, and might even take two passes.
I have lots of picture tubes from an old version of PSP. I now have PSP X5. What is the correct format for the pictures? I have both psp and tub.
View 2 Replies View RelatedI saw a long thread on this, but it was back in 2007, so I just wanted to ping the group and see if there might be any new technology to bring into this topic, or if the older thread and the limitations it discussed are all still valid in 2009.
View 5 Replies View RelatedI would like to type some text in a curved format.
I would like to draw a line,, curved.. and then type text on the page.. then cut and paste the text, letter by letter on the curved line that I drew.. then when done,, remove the line,, leaving just the text in the shape of the line that I drew.
Recently I've started getting this error when I try to use the Organizer in version X2. Then PSP freezes. I am not being able to use the Organizer.
View 1 Replies View Related The Photo Paint program can save an image in several formats. However, I do not see an option to save an image file in the .png (portable network graphics) format.
Is it possible to save an image in the .png format using Photo Paint?
I tried save two bitmap layers with some mask in X4 in .pspimage and can not open it in X3...
View 2 Replies View RelatedI get the idea to save my processed RAW files in jp2 jpeg 2000 16 bit format(channel) so they need less space as RAW or tiff and can be later good modify without noticable quality loss. But i get the requester, that the format support only 24 bit ( 8 bit/channel)
jpeg 2000 is here since 10 years. Is it not possible that windows or other programs can read 16 bit /channel files, or whats the reason wy it is not possible in PSP X4 upd 1 to store such files ?
Does other programs too not support 16 bit /channel jpg ?
I just joined and this is my first post. Actually I have not even downloaded the Paint.net program yet - have to wait till I get home from the office. Thought I would ask if the program is pretty user friendly for creating wallpapers, and if there is a "template" for it. I will want to create some "wide-screen" format wallpapers, so wondering what dimensions those usually are - should I assume that is determined by the actual dimensions of my monitor??? Free -floating questions from a newbie..!!!
View 3 Replies View RelatedI manage a website and I have to resize bundles of images frequently. I find it a problem in Paint Shop Pro X5 that every time I resize an image it shows as a tiny thumbnail. This causes me to go to the 'view' toolbar and then from the dropdown box have to click 'zoom to 100%'
How do I format PSP X5 to automatically show resized images at 100%?
I created a work in PSP using raster + vector. The image is configured to A3 paper dimensions.
I want to send it to be printed in an external store. With CorelDraw, it is just sending the CDR file (with vector in curves) and the file by itself shows A3 paper dimensions when opened. So, the guy who will print just make the job, without any question!
It seems to me that files like PNG or JPG can’t be handled as CDR file by the person who will receive the file. So, what should be the better PaintShop file format to send to external store to be printed in the way I mentioned?
I can't see a way to search for this issue that seems faster then looking manually. X4 will open X3 jpg's, but not X3 TIF's. X4 will open the older PSP files, but X3 TIF's show up as black rectangles in X4 workspace and won't open. I've uninstalled X3 already, but do not consider re-installing it as a solution. Previous versions of PSP have been backward compatible for me. If I open a RAW file, edit it and save as a TIF, it will open.
View 3 Replies View RelatedI'm trying to find a editor that will allow me to do some basic things with a very large tiff file created from a wide-format scanner. I had hopes that Paint .NET would do it since it seems to support 64 bit. The file I'm trying to edit is 1.7GB uncompressed tiff. Unfortunately, Paint seems to take forever to load (5-10 minutes), even when I have at least that much available memory on my 4GB Win7-64 machine. Are there any tips to conserve memory or to make this possible?
View 1 Replies View RelatedI purchased and installed version PSPX4 in Jan. 2012, and started noticing, what appears to be, a duplicate copy of the same file with an Asian type file format in the Recent Doc folder. When I attempt to do a weekly scan of my system for spyware, malware, etc. and weekly clean up of my registry, temp files and other files taking up space, one of my programs finds files listed in the registry under the Recent Doc folder that it cannot clean as the format is not recognized. Even though the properties of the file link the file back to the folder the .jpg file is stored in, there really isn't a file with that format. This is just a reference, and very annoying.
Recent Doc folder showing reference to a duplicate image after copy and pasting as a new image.
Photozoom Pro2 not in File Format Plugins, import
however it is available as File format Plugins, export
Is that the intended behavior
I have successfully downloaded my Paintshop Pro 9 into my new computer with Windows 8 operating system. I am now trying to upload my Paint Shop Pro X2 upgrade but am getting error "The system cannot read from specified device"
View 1 Replies View RelatedI recently installed the Developer Preview of Windows 8. I already had PSP x4 installed in Windows 7 and it worked fine. Once I tried launching it after the upgrade if failed to load. I completely uninstalled PSP x4 and reinstalled. Still will not launch.
View 14 Replies View Related