If I paste an image which is larger than the canvas size, a part of the pasted image will be outside the canvas. How can I resize the canvas so it will reveal only the image outside the canvas but no extra white space is shown.
By using the built in "Resize canvas" function, there is a lot of trial and error involved.
I work with .dds texture files a lot in modding the games Oblivion and Skyrim, and whenever someone else releases a mod that I like, I usually change it to my preferences (solely for personal use, of course). This occasionally means editing their textures, but some people have a way of making the texture "invisible" (as in totally transparent), yet still readable by the game as well as some plugins like Emboss. This makes it impossible for me to do anything with the file, and as a result some become completely unusable. what this "invisibility" is caused by, and a way to reverse it?
View 4 Replies View RelatedHow do u get an image to stick out of the sig or canvas? i know how to paste and render inside of the sig/canvas.
View 4 Replies View RelatedI have a scan of a book I need to read for school. The professor scanned the book face down so each page is two pages of the book and it is rotated clockwise of how it should be read. I am trying to get some kind of OCR to work on it, so I want to get each page of the book separate. The goal is to get to the point where I can read and underline text on my Kindle.
Here's where paint.net comes in. I have already taken screen shots of the pdf and split the pages into separate images using ctrl+alt+V so they are already split. Now I am trying to make them all stacked on top of each other like say a Word document would be. I cannot figure out how to expand the canvas to allow the image I want to paste in to show up. It only shows up on top of the image that is already there. I can expand the canvas, but anywhere the new image crosses outside the perimeter of the one already there, it only shows the gray checkered pattern.
is there any way to send an immage from the canvas to a email message.
View 2 Replies View RelatedI wanted to combine two images one needs to be fit to the scale of the background image. So basically I followed the instructions.
Open up your background layer which was 800x600 landscape photo.
Then I imported my other image which was 600x800 portrait photo too. Layers -Import from file. I resized it then copied into a new layer. That was fine.
The problem is as soon as the new image is imported, the background image changes so that it only takes up half of the canvas. So now I've got a white area for half of the canvas. I can't seem to change this.
When I add a image to my background my background shrinks to the top left hand corner of canvas. I have been trying to do this every night for a week now and held out posting until I gave up. Also when I try to paste an image I get a message saying I don't have enough memory (I have 20 GB of memory free). I tried to find Pleska plugin for adding from file but could not find it.
View 8 Replies View RelatedWhen I go to create a File/New Canvas, sometimes the canvas area shrinks a lot.
Is it possible to keep the original canvas size ?
I Want Create a Reveal Transition in the timeline with black & white paint splatter matte! i can this in ACTION MODULE but i want in timeline!
View 2 Replies View RelatedWhen i am using layer masks in elements 9 I can conceal paint with a black brush, but when I want to go back over something to reveal (white brush) nothing happens. I have the layer mask selected as active and it works perfectly fine in reverse (black).
View 1 Replies View RelatedI am doing a kinetic typography project for for set to a certain song.
At one point I want two words to be displayed with simple text movement and once those two words are in place I would like an image to rise from behind them to be on top of them(not in 3d sapce but standard 2D). Since text is transparent you can see the image behind the text before the image is set to move.
I tried creating a mask around the image which does mask it out but when I move the image up the mask moves with the image, thus keeping the image masked. I thought maybe a null object with a mask would be needed but I cannot get to see to get it work. I feel this should be easy but I just do not have the skills to put the pieces together....
I just got CS5.1 at my job. This must be a preference, but when I adjust the Canvas size, it will constrain the image, rather than cropping the canvas. The Anchor in the Canvas Size menu appears outlined (highlighted?) which indicates that this is something in preferences that I can adjust.
View 2 Replies View RelatedImage menu>canvas size: I can no longer type new dimensions in the number boxes. I have to use the sliders or the arrow keys.
View 2 Replies View RelatedI've been using PSP for a long time now (fisrtly PSP7 and now PSP9) and I wanted to buy the new version PSPX4. I downloaded the free-trial version and I saw that it is impossible to generate files bigger than 10'000x10'000 pixels. In the canvas size menu, it's impossible to give a higher number. The problem is that a made bigger files with PSP9 and I'd like to keep on working on it without resizing them.
So my question is : Is it only a limitation of the trial version or is it simply impossible to work with bigger images than 10k x 10k ? I hope there is a simple solution because PSP9 encounters some problems with Win7...
I like Paint.net quite a bit more than Gimp. I do, however, like the Single Window Mode in Gimp, allowing me to tab my windows together, then lock the cluster to the side. It doesn't cover the image, either.
I was just wondering if there is a plug in that would emulate something similar for Paint.net? I can't stand constantly moving my windows around based on the size of my image. It drives me up a wall. Even something to restrict the size of the canvas, so it can't go under the windows would work.
I have pdn file that has multiple layers so when I go to the one I want to copy to another canvas entirely, I used the lasso selection tool and copy.
Well, it did but what it copied was a blank lasso with the nubs around it. I think (I was just trying any and everything to get it to copy the image not a blank.) I think! I made a duplicate layer and then it showed up.
Is that the way to transfer one layer's image into another canvas? Or is there a surer and easier way.
As I was cropping this image from a black background (not layered), I forgot to crop a single column of black pixels. However, I almost missed it, because the canvas always has a small shadow, for the simple purpose of looks. Is there any way to turn this off?
View 3 Replies View RelatedONLY--now when I go to the layer I made the original changes on in Text, it refuses to let me type new ones. The little symbol shows up and the long line for text size and placement, but it will not take the text.
My mentor who is out of pocket right now--hey you know who you are!--said I should try using esc because I probably had a selection hanging around. So I did--and did--and did. Even used ctrl z a few times thrown in! No luck.
I did manage to "fool" pdn enough to copy and post one of the text pieces I need, but no more. It's on to me.
I don't want to post a scrnshot because I don't want this particular thing on a public site like Photobucket. With my mentor we've been able to use email and attachments.
why the text tool won't work beyond placement and flashing vertical line.
I notice that, for example with the the text creator, you can move the text around the canvas before it "freezes up" so to speak
How can I move text, or an object, around after this happens
I have a rectangular object directly on a transparent background. Is there an easy way to resize the canvas to the object?
View 2 Replies View Relatedusing Paint for a few months with great results, but i'm having problems trying to get font sizes to fit a page i.e.A4, i set the canvas size dpi etc, but can't get for example the the letter H in Stencil font to fit to the page without selecting it and stretching it manually which makes it not look correct, the font size won't go past 288.
View 6 Replies View RelatedI have an icon I want to add text and another icon to...
so I incresed the canvas size the existing icon has a stronger checkered background than the "new area...
and: I cannot do (except for pasting another image) anything with the weakly checkered area??
do I need to add transparent background first for the new area?
It use to be that when I would import a picture that was larger than the current canvas size I was dealing with it, it would ask me if I wanted to enlarge the canvas size or not. Now it just automatically is changing the canvas size and it's driving me nuts because I don't want it to do that!
View 2 Replies View RelatedHow can I do a normal 2d photo like a painting as in the link.
View 7 Replies View RelatedI'm trying to make a picture compostion out of several pictures. I want the canvas to be fixed from the beginning and stay fixed. The problem is that whenever I add a picture using "Layer -> Import from file" and the imported picture is larger than the canvas the canvas get resized to the size of the imported pictue. Is there a way to prevent that?
View 1 Replies View RelatedHow to create my renderings in order to obtain the clearest, crispest result. For example, I created an invitation in PDN with a finished size of 3.7" x 6.7". I started with a canvas size of 11.1 x 20.1 so that when I reduced it down, it would retain the same ratio and as much clarity as possible. I did a "save as" in png format, then reduced it down to the finished dimensions. My final png was still really grainy looking, especially the text.
I am wondering if the original canvas needs to be set as something other than the default resolution of 96 pixels per inch. Should I have set that at a higher resolution setting? If so, what is appropriate? How large should the original canvas be in proportion to the finished size? What format will be best for clarity when producing the final image (i.e. png)?
I discovered via a tutorial video making a transparent title in PowerDirector 9 Ultra video editor. The demonstrator used Paint.Net to create a 16:9 ratio canvas... but since installing your program I cannot figure out how to create a canvas to match these 2 video sized canvases.
View 5 Replies View RelatedI must have hit the wrong key somewhere along the line. Until yesterday,, the ruler on the top and the left side of the canvas was in inches.. now it is in ???? Starts on the left with 0 and ends on the right with 3400 !
How can I get back to inches?
I have some small rectangular drawing of different sizes (about 3" x 4" or 5" at 200 pixels/inch).
I want to place a simple solid black line border around the edge of the canvas. These drawings have a white background.I do not want white showing past the outside edge of the border.I want the border to show with an even smooth width on all four edges of the drawing.I want to specify the color and the width of this border. Here is what I have unsuccessfully tried: Using the Rectangle or the Line tool on a layer assigned for the border is a hit and mostly miss proposition.
For the Rectangle tool, once the rectangle is placed on this layer, I do not know how the adjust this rectangle. I erase the rectangle and try again. Sometime what I see is okay, but most of the time what I see is irregular and poorly positioned. For the Line tool the lines drawn often show as a stepped line, not a single width line. I do not know how to not have these steps occur, and I of course do not want curved lines. Can you instruct me about how I can create a simple solid black line border around the edge of the canvas?
I'm guessing that this is a super simple question, but evidently I'm not sharp enough to figure it out....I've imported a bitmap file [.tif] into PP, & it's MUCH larger than the letter-size canvas I'm using. So I'm wondering what the simple method is to fit that bitmap to the canvas. The thing that's driving me nuts is, I select this big bitmap [it's roughly 3300 px by 2800 px, FWIW], go into Image > Resample, & under "Image size" it's giving me 11.0 x 8.5! And why PP is saying that the image is already the same size as the canvas--well that's why I'm writing this post. Cause I don't know why.
View 1 Replies View RelatedAny way to change canvas color from white to black?
View 5 Replies View Related