How can I bend or curve a background and object like in this picture?.
(Not spiral bend, 3D shape or whatsoever but like in the picture below)
[URL].....
Most of the bend and curve tutorial not really showing the result that I wanted.
I have a small company doing designs onto mugs, steins, pints, etc. I recently added the ability to do custom photo designs, so now I'm trying to perfect the image curvature for my pint glasses and coming up against a problem.
So - with a pint glass, in order to put a design on it you actually have to curve the image. I'm following this tutorial here - [URL] where he shows how to use GIMP to curve a photo to insert into a tumbler.
I am doing the same process except my dimensions/numbers are different. I need to be able to create the appropriate .points file for my pint glasses but if I use the one he created, my image will be off since the pints don't have the same dimensions as the tumbler he did the tutorial for.
SO - all this to say - how the heck do I calculate what values to put in the points file? For example, on this particular project I need to make an image to be curved up 5/8" on the bottom and 3/4" on the top. He used .25" and .3125" so if I use his file, my designs won't be right.
I'm trying to make a coin with text, numbers and everything.. But since the shape is round , I need to bend my text so it fit the shape of the coin!
View 1 Replies View RelatedCan I bend these paths making a 90 degrees curve pointing right so that the green line forms the inner curve with a smaller radius than the red line?
View 2 Replies View RelatedI am new to Paint.net. I am trying to learn how to make a color picture into a black and white picture with one item in the picture in color. I have searched the web and the site and have not found any thing. I searched through the Plug ins section looking for some kind of "Mask" and what I am supposed to be looking for - where to find one specifically for Paint.net.
View 13 Replies View RelatedI try to shoot all my pics same light, etc. I want to paste all my designs on this uniform towel (no background).As you can see the square pasted on with basketball is on the same cloth but looks unmatched.
how I could blend/edit it in with the towel, keeping basketball & Kyle the same? Or should I try doing something else?
I am trying to delete an object background to create a gif of an object (the object in this case is a broken cell phone). Everything appears to be gone BUT...there are these flowing blue items around the object. When I export the file to gif...those items are still attached to the object.
I have used photo shop and have not had any issue removing a background around an object.
Is there any way I can bend a 2D object? I have a drawing of a hydraulic hose running straight in the x axis. What I want to do is to be able is to bend the hose around 90 degress (to fit in a case) without altering the overall length & width. I have attached a simple drawing that should explain the problem. I know the lengths don't match, this is purely for illustration
View 9 Replies View RelatedI wish to cut out/lift the an object from an image to create on a white background .
View 4 Replies View RelatedI need to remove a picture of a horse in the background and replace it with a picture of a fence similar to the rest of the picture. I know how to erase the image using the lasso tool and the magic wand. How do I clone part of the background to replace the erased image and then blend the two pictures together?
View 7 Replies View RelatedA method to bend a linear 3D extruded object in Z space? I'm wanting to bend an object such as this (created in Photoshop CS6):
Into an object such as this (achieved in a dedicated 3D application), but I want to be able to do it in Photoshop.
I have a picture of a pretty line (DNA if ur science-y) on a black background and I need this to bend halfway through the image so the line makes a curve with an almost 60' angle. You can just grab the corners of the image and move them where ever... nooo... u can't.
View 1 Replies View RelatedI want to sort of bend an image around another e.g. straight vines manipulated to warp around pipes.
View 2 Replies View Relatedi have 2 questions.
How i can give the line/bend funktion more points to deform it. Actually it have 4, but i need more for better deform the line/bend.
Any plugin that i can make other arrows? See the red arrows on the picture...
Uploaded with ImageShack.us
I need to extract a curve off a nurbs object. I do it all the time in maya, but can't figure it out in max....
View 1 Replies View RelatedC3D2010, SP2
This command does not function correctly for me. Notice that it will ALWAYS draw the arc from the actual end of the object, not the end closest to the selection as it should?
I have this weird problem where some objects won't work like the usual. The original pic is like this,but when I see it in thumbnail in windows explorer, some objects are missing but they're still there when you open the file!
I marked the status bar, in those missing objects it says "Curve on Desktop" while other objects of corelDraw, no matter what kind of file, they're always written as "Curve on Layer 1".
And then when I Ctrl+G all the objects above in pic 1, all those objects with Curve on Layer 1 and Curve on Desktop, it becomes like this: I don't know what happened. When I made the shape in the 1st pic, I used old file with similar shape, I only edit the sizes & the colors, but previous File is just fine, only this one looks weird.
i am trying to add CV curves to a scene that I already created.
whenever I draw the curve in side view, it is actually nowhere near the object that I wanted it to be near. Its like super far away and im not sure how to move it to the right spot.
Is there some method to add the curve based on a position of an object?
I know in max its possible to bake out a spline using an animated objects keys. Is something similar possible in Maya?
View 2 Replies View RelatedI'm trying to get these shapes to curve up, like a smile, and then curve down, like a frown, as the word changes to "misery." (The middle object stays in place, the objects on the outside rotate upwards and downwards)
View 4 Replies View RelatedI recently saw on TV that someone had 2 nearly identical images - one with just the background, another one from exactly the same point of view featuring an object before the background.
He was then able to subtract the background so only the object in front remained. Is that possible with Photoshop as well? I have version CS3.
The background mask does not align with text in curve labels with the "allow curve text" set to true. See Attached.
I found old posts with this problem for version 2009 and older. Is it still a problem in 2011/12/13?
(running C3D 2012 sp4, Win7 64bit, 8GB)
Trying to find out how to copy an object multiple times in a curve. I've used microstation and it does it easily and just wandering is AC has the same type funtion without going throught 6-8 steps for each copy.
View 9 Replies View RelatedI am doing some animations involving sine waves, and I can make an expression that controls the translation of an object such that it travels along the path of a sine wave, but I can't figure out how to dynamically create an editable sine wave curve.
Is there a way to have Maya generate a curve based upon the path that an object travels upon?
For instance I have a sphere that is moving along the X axis with time, and also moving up and down on the Z axis back and forth. I would like to make an editable curve object of this path of motion.
I can see in Maya 2012 we will have motion trails where we can see the actual path an object is moving along, and that we will be able to interact with this path to alter the animation, but what if we could take that path and make it an actual curve or NURBS object?
I'm rigging a model of a robot and I have wires (nurbs circles extruded along a curve) attaching to two objects that are on different joints. I have it rigged so that when the first joint moves, half of the CVs of all the wires (in a control cluster) move along with the joint (and, in turn, the object they are attached to). This much works fine, the extruded nurb follows the curve and stays the same diameter from start to finish. My problem starts with the rigging of the second joint (the second joint is the parent of the first joint). I've tried many different ways of rigging it, but as I'm only just starting rigging my thought process isn't quite a straight line yet. Basically my problem is when the source curves physically move, the extruded surface goes twice the distance as displayed in the picture below.
I need to know how to get the extruded surface to always be in the same place as the curve with out breaking the connection.
Any way to turn an object that has been used as a master (parent object) or its resulting clone back into a normal object?
View 10 Replies View RelatedI want to know if there is a way to make the vertical hatching angle move with the curve of the object being hatched.
In other words how do I/can I stop this ...
I've read on the internet that to make a Bézier curve, you are supposed to right click, i believe? It says to press the right mouse button. When I right click, however, it just makes another cubic spline line of secondary color.
View 1 Replies View RelatedI cannot figure out how to distort text into a curve to achieve a similar result to this Lucasfilm logo:
Hopefully I haven't overlooked a tutorial here somewhere - I've searched but not found anything. I'm guessing this'll have a really basic solution that I've missed completely...
I'm trying to create the magic effect found in this image: [URL]
I tried creating an ellipse and filling it in with semi-transparent brush and use the dents tool on it but its just not... WAVY enough. Is there a plugin or way to add more lines to the lines/curve tool? That would be VERY useful at all times so I can make custom waves/do more things with it.
When using the Line / Curve tool, I tend to cause a line to "finish" because when I try to click on a handle to bend the line, I miss, (due to poor vision)... and the line can no longer be adjusted. Is there a way to cause the handles to re-appear so I can complete the line the way I need to? "Undo" only makes the line disappear, and I have to start all over.
View 5 Replies View Related