I have a Guitarfretboard that is build of 3 groups.(as in the pic)
What i want to do is create kind of a "stairway to heaven". So i would need to deform the whole group and make twirls and ups and downs, like a railcoaster.
The best way that i found to do that is to set a lattice on the group. But then when I deform the lattice points the single groups wont hold together anymore and start to seperate and mess up.
I'm new to Maya, so this is likely something I'm just missing or that I've done without realizing it, however...
I've created a scene with a few polygonal objects. As an example, imagine a house with plants around it and a cloud above. The plants are spaced evenly along a curve, and the cloud is also made using a Paint Effect with a Modifier around it to control it's shape using slight forces, etc.
However, when it's done and I select the entire group of objects to drag to a different position, weird things happen. The plants seem to move much more quickly in that direction, so that soon they're no longer positioned where they should be at the base of the house, and the clouds move in the opposite direction from where I'm dragging (i.e. down not up). What I'll call the 'normal' polygonal objects (e.g. the house, car, etc.) all move fine, but I cannot figure out how to fix the other items so everything maintains its relative position, or lock the whole scene together to move as a group.
I've tried to combine them, and even 'parent' everything to the house, but I suspect I've changed something like a control handle position or rotated something that now moves opposite the normal xyz directions.
I used to be able to create quick a makeshift skeleton for things like robots by parenting the objects that make up the robot to each other hierarchically. But the past few times I've tried to do the same thing, the child objects deform in weird ways when I rotate the parent. I looked and found a few references to this in forums, but not a single solution. The idea of going through and setting up either a proper skeleton, or parenting everything to group objects seems unnecessarily complex and frustrating when there was a simple solution before.
I have table, several chairs and some glasses and plates on table. I want to group them and instance that group, hundred of times. Problem is that I do not have materials implemented and I will not until client is satisfied with arrangement. I have problems later, even using many scripts I found, to add material to all instances. Only way is to select one by one.
Other thing is that there might be new objects added into set, so best way would be to add to master group and that will be added in instances of that group automatically, but that does not work with Maya.
I can't seem to be able to select multiple points with the marquee. I'm on a mac... Usually you can select a grouped object, switch to point component and grab a whole chunk of points, then move them etc. I can't do this anymore!
I'm not new to modeling, but new to Maya. I'm trying to extrude a group of faces, but it is making me extrude them at the same angle they are at in the model(local I think). How do I change the axes to extrude the faces straight up instead of at the angle they are at?
I know this is easy in Max, but I can't find it in the Help File of Maya.
I was wondering if there is a way to create a group of vertices, edges or faces and somehow create a reference point or attach them to some kind of locator so they can be referenced at a later point. I want to be able to select a group of edges, model them and then move on to another task within Maya and have some kind of reference point so I can go back to the original group and not have to select them individually every time I want to work on that group of edges, faces or vertices, is this possible? I will post a picture shortly to this post so you can see an example of a specific group of edges that I would like to set a reference point or locater for.
I am looking for the same function in Maya that I use alot in 3DS. In 3DS, you can "Merge" (import) models from another scene (file) into your current one. It allows you to pick a single model from the imported scene to be imported into the current scene.
I know Maya has the import function but it seems to import all the objects. I just want to import a particular model.
Is this possible in maya?
3DS Max 6 to 2009, Maya 2010 NVIDIA Quadro 1700, Quad Core 2.67GHz, 4Gb RAM [URL]....
i'm trying to close a gap between 2 objects to prepair it for 3d printing (a halo ODST recon helmet for halloween). i had found a bunch of papercraft models but those won't print properly as they are on my replicator so i'm trying to make the pieces thicker so they have real substance. i've attached what i've got so far.
as you can see, there is a gap between the inside and outside of the object that needs to be closed.
i've tried "fill hole" but that fills the entire space which is unacceptable. bridging is no better.
i've never taken classes for maya and don't have much money for books. What is the procedure to properly close that gap,
I'm trying to import a part from solidworks. I've tried opening the .SLDPRT file, converting to IGES (203 and 214), and STEP. All give the same result.
See below pictures - the Maya import has "dingleberries" where there should be a flat surface (i.e. some of the tubes extend when they shouldn't). I know imports are rarely perfect, and that's OK as long as I know how to clean things up. How can I trim off the extra surfaces that appeared after the import? I'd just use an extruded cut in SolidWorks, but I'm in a strange land with Maya.
I have a problem with selecting multiple objects!!! Everywhere it says that you have to hold shift and select the objects you wish but when I do this it selects all the objects in between! How can I change this?
I'm having this issue where when I select an object in the outline and want to move it say, to another group or reorder the objects, it changes my mouse to circle with a line through it and won't me do anything.
is there a way (probably a pluging) to deform a 2d picture in a 3d mesh? I work with virtual shoes, so I need to scan fabrics and apply them to shoes, but I want to deform the fabrics to make them look more realistic.
I'm having a deformation problem with clusters. Basically, the clusters are deforming the object which they are parented to. I've checked "relative" for each cluster under the attribute editor.
Regarding hierarchies, the above is the last iteration I have tried. Before that, I tried parenting the clusters to curves first then parenting the curves to a master control. The object was also parented to the master control.
I've tried maya default of grouping individual clusters first then parenting them to either the object or the master control, but the same results are achieved.
Please see the video below.
At one point the clusters were behaving as required, but I can't reproduce the results. I was going to animate the CVs, but parenting the curve to geometry or control presents problems of its own.
I need merge many objects in one for export to fbx. If I delete any of polySurface objects, mesh lowpolyHouse crushes. If I stay it, than it all export to fbx file, problem is that I need mesh object only.
I am having both objects disappear after a Boolean Union (I am going to try creating just two random objects - a cube and a sphere - and seeing if the operation works with them).
One thing that I have thought is that the resolution of the mesh might be srewing up the operation (The sizes of the polygons in the two objects is pretty different).
So that might be a factor (when I am in Mudbox, I could try not subdividing the smaller objects as much as the larger one, so that the polygons are the same size).
How I can check if an object is within a polygon face on the y axis?
On another note, would it be possible to get a world coordinates of the U or V vectors of a vertex? I had been trying to calculate it from two vertices that has around the same V values, but in some cases they don’t exist.
So, when in object mode, I can manually input numbers to translate, rotate, and scale an object - either in the channel box, or in the attribute editor.
But what about subobjects (components) like verts, faces, and edges?
Sure I can move em around with the manipulator, but where can I manually enter in precise numbers?
i'm having a lot of troubles with a free rig i downloaded at creativecrash [URL]. I'll keep it short as i have quite a lot of things to explain: I animated my shot, and everything was ok. Now i have to shade/light/render my shot using vray, trying to create brand new vray materials; I started from my robot-character. Here comes the problems: - I can't select the polygon geometry(i asked the rigger, and he said the geometry were imported as references at rigging time). There are no geometry layers in reference or template, then there must be somthing else causing me the problem. I can access to the object via hypershade, i can click on the shape node and i can see the geometry selected, but then, when i try to access faces, i can't select them!in no way. This means i can't create selections for materials, and so i can't shade as i liked. I tried to selecte faces using the select by materials feature in the hypershade (as the character has some pre created basic materials)but again, i'm not free to assign materials where i want, and i just can use the pre-existing face selections and work on those, but it's not enough for me. [URL]
I have a subdivided plane that I wish to scale horizontally to match another objects dimensions. In cinema 4d I can check an objects width and then just put that number into the other object width input.
This is probably just me not being up to speed yet, but once I combine a set of polygons, is there an easy way to still change the attributes of the original individual objects?
Prior to combining them, each object appears in the Outliner individually and I can select it there and change its attributes...color, etc. But I need to lock them together to keep their relative positions, and combining them does that perfectly. But afterward, the individual list in the Outliner doesn't seem to work anymore...the 'polysurface1' that was created has all the attributes crammed together, and having to scroll through all the tabs is a pain in the neck. Isn't there some way to combine objects and still readily change the colors or other attributes of the separate parts? Or, as I originally wondered about, is there an easier way to hold them in position without combining them?
unable to select objects after creating them in view port ..i am not able to select them in view port i can only select them either by SELECT ALL or from outliner or Hierarcy
So a friend created a model using zbrush and exported several different *.OBJ files. I imported those to maya and added shaders. They all fit correctly together when imported.
some of those obj files required me to do a mesh->combine. so now it appears that not every item has the same reference point so that when I move or scale the entire item, some of the objects move seperately. I think it is only the ones I had to combine.
I tried freeze transformations, but when doing that, some of the objects lost their scale settings and still didnt move together as one unit.
I have a problem when I am modeling my character or rather the character from the animation academy. I have created an NURBS sphere and I want to adjust it to the arm, so I go to the component mode add some isosparms and then it happens!!! I can´t move any vertexes... but in the object mode I can move the hole object.
how do I scale a group of polygons in their local axis? I have seen people doing this fine in Maya.
I have attached an image that explain this clearly. It's a simple cylinder, extruded and when I scale the extruded polygons in local x axis, they get scaled in crazy different axes.
I have some edges on my models that dont cooperate when i click Loop. They're inline with each other but it wont loop for some reason. Is there anyway to tell 3dsmax "hey this is an edge loop.... turn it into an edge loop selection."? i use the cut tool, insets, bevel etc and some edges loose the ability to be selected as loops
We recently upgraded from 2008 to 2012. Sometimes, on saving a scene file, some of the meshes within a group node "disappear". They basically behave like they're on a hidden layer -- even though they're not. You can see the transform and shape nodes in the Outliner, but in the viewport they're gone.
I can fix this by un-parenting the missing meshes, at which point they reappear -- and then when I reparent them as children of the original group node they're fine. But when I save the file and reopen it, the meshes are (sometimes) invisible again.
You might think the group node itself is hidden or attached to a non-visible Display layer, but it isn't. And there are other meshes within the group node that show up fine.
How I can permanently avoid it? I'm working on fairly complex environment scenes, and having to selectively unparent/reparent meshes each time I open my files is a real hassle.
I was wondering if there is a way to create a group of vertices, edges or faces and somehow create a reference point or attach them to some kind of locator so they can be referenced at a later point. I want to be able to select a group of edges, model them and then move on to another task within Maya and have some kind of reference point so I can go back to the original group and not have to select them individually every time I want to work on that group of edges, faces or vertices, is this possible? I will post a picture shortly to this post so you can see an example of a specific group of edges that I would like to set a reference point or locator for.
I am not able to use the "group" command in AutoCAD LT 2013. Instead, I get the message "group with same objects already exists" when there is no existing group.
I built a building in AutoCAD Architecture 2013 and inserted the file into 3DSMax 2013 via the file link manager. I would like to group certain AEC objects from my DWG file in 3DSMax so that I can assign materials, move them around without losing placement, but the "Group" and "Assemble" drop-downs are disabled. Why am I not able to group these objects?
