i don't do much printing through lightroom but yesterday went to print a contact type document and the application would constantly quit as soon as i hit 'print'. it does this whether i print by hitting 'print' directly or whether i go through the printer dialog box and then hit print.
View 6 RepliesQuitting and reopening Lightroom restores navigation.
View 1 Replies View RelatedI have been using LR since version 1 without problems. I run LR 4.4 on an iMac 27 inch with an external HD - originally OSX 10.6.8. The disk was originally firewire but I have recently changed that to a USB3.0 4tb drive. I copied all my photos and catalogs onto that drive and it worked without problems for about 2-3 months. Recently however I am getting crashes whereas I have never had one before. Suddenly LR4.4 started saying that it had experienced an unknown error and had to quit. On re-launch it wouldn't open the catalog. In fact not only would it not open the catalog, it had left 2 files in the folder with the catalog - lrcat-journal and lrcat-lock. Neither of these can be deleted (I get an unknown error code -50 if I try to do so). However if I restart the computer I can then delete them.
I thought it might be an operating system problem and finally upgraded to OSX 10.8.5. Same problems but I noted an error message saying that there had been a problem reading from the preview cache. I deleted the contents of a folder called Lightroom Cache and deleted my previews. (In fact I run an identical system at another location and simply copy catalogs from one system to the other as I work on them and so I copied the previews from the other system). This seemed to work better.
But then I installed the demo of LR 5, upgraded my LR4 catalog and am having precisely the same problems. I should say that the other system (still on 10.6.8 and an external firewire drive) has worked flawlessly since version 4 was released - and had no problems with versions 1, 2 and 3.
Since LR 5 is exhibiting the same problems, my only thought is that it is a problem with my USB drive. I have run Diskwarrior on it and rebuilt the directory - no problems encountered and have run Disk Utility on it - again no problems found. I have had no problems with the drive that I am aware of - it seems perfectly stable and behaves exactly as it should.
I cannot use LR 4.4 or 5 on this system. Is there any reason why LR should have started to object to the USB drive (it is USB 3.0 and my iMac is only USB 2.0 but there is backwards compatibility). Something is very wrong but I can't work out where to start.
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedMy copy of PhotoShop has worked fine ever since I've had it
Now, suddenly, I can't open it. When I try, the loading splash screen appears and goes through all the things it's loading, as usual. But as soon as it's finished loading, it automatically quits on its own.
photoshop cs6 won't stop quitting.
View 2 Replies View RelatedI Have to force quit Photoshop CS5 in order to get it to quit at all? Then it takes quit azwhile to quit after which a user report comes up to be sent in to Adobe.
I have tried opening it resetting the prefs file, to no avail.
I just upgraded my iMac (3.06 GHz i3 with 8 GB RAM) to OS X Mountain Lion (10.8.2). Tonight I opened Photoshop CS5 for the first time since the OS X upgrade and created a new document (8.5x11 grayscale, 300dpi). Everything was fine until I saved the document, then "saved as" under a different filename. When I tried to re-open the original document, Photoshop immediately quit and continued to quit every time I tried to open the original document. I concluded that the document had gotten corrupted and started over, recreating the document from scratch; but exactly the same thing happened again. Once I saved the original document under a different name, Photoshop immediately quit every time I tried to reopen either the original document or the "saved as" version.
View 11 Replies View RelatedWhy does my Photoshop CS5 keep quitting unexpectedly?
View 1 Replies View RelatedWhy is my ps3 quitting unexpectedly all the time?
View 5 Replies View RelatedI've literally been opening it for the past hour but it quits within 30-60 seconds..Did they purposely give us this one for free knowing it doesnt work
This is the message...
Process: Adobe Photoshop CS2 [204]
Path: /Applications/Adobe Photoshop CS2/Adobe Photoshop CS2.app/Contents/MacOS/Adobe Photoshop CS2
Identifier: com.adobe.Photoshop
Version: 9.0 (9.0x196) (9.0)
Code Type: PPC (Translated)
Parent Process: launchd [88]
[code]...
When trying to use photomerge, Photoshop (CS 5.5 version) quits immediately. How can I fix it?
View 6 Replies View RelatedIllustrator keeps quitting even when I save a new Illustrator document, it quits when reopening it.
View 5 Replies View RelatedI just upgraded to Lion, and now my Illustrator crashes before it opens. I tried deleting the prefs files, but no luck.
Here's the error:
Process: Adobe Illustrator [8593]
Path: /Applications/Adobe Illustrator CS5/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Identifier: com.adobe.illustrator
Version: 399 (15.0.1)
Code Type: X86 (Native)
Parent Process: launchd [150]
Date/Time: 2011-07-23 18:08:41.424 -0400
OS Version: Mac OS X 10.7 (11A511)
Report Version: 9
Interval Since Last Report: 64735 sec
Crashes Since Last Report: 15
Per-App Crashes Since Last Report: 13
Anonymous UUID: 17486957-5091-4D35-9C35-190464A01EAD
[code]....
I am running PS CS 6 (fully updated) on my new top spec Imac (32Gb RAM, 2Gb video card, 3Tb fusion drive) with OS 10.8.3.
PS runs OK but when formally quitting I get an error message every time advising that PS quit unexpectantly.
I have encountered a problem when attempting to save my DWG. A message appears quickly then the program closes, or the program will just instantly close when I hit save. I am using Cad 2012 on a macbook pro. see the attached file that is a screenshot of the pop-up that I receive.
View 3 Replies View RelatedThe inital thread was created because Adobe Illustrator from CS6, downloaded via the Creative Cloud, quits unexpectedly upon launch everytime. However, all of the other desktop apps I downloaded work perfectly.
I tried every step suggested in the thread, however none of the solutions worked. I restarted my computer afterwards and it still does not work.
I wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
All was working OK and the printer is showing ink cartridges almost full In the Library Module the print review is fine.
Switch to Print Module and the print review is now blank (100% white)
Pictures no longer print
Windows 7
Espon Artisan 835 printer
LR5.3
I have just bought and installed Lightroom 5 and need to set my print size to A3 and in the future even bigger. I do not have the facility at home and need to have them sized correctly for the print shop so they do not have to waste time resizing them. I am at a loss how to do this. I cant find any settings for this size print. A3 is roughly 42 x 29.7 cm.
View 2 Replies View RelatedI cannot seem to reset the print template screen while in the " Print " module. It has adopted the smallest pic size with three times the normal border. I wish to reset to full screen in print module
View 1 Replies View RelatedHow to ADD (almost) white Border around photo(s) to print in print module (not for creating a JPEG) WITHOUT TRIMMING the photo?
I dont understand why I'm so stupid not to be able to acheeve this simple task with Lightroom WITHOUT TRIMMING the image (altering it's proportion and cutting away photo-content)
(on light-gray backgrownd for instance, to use as cutting indications. I know how to use cutting-indications for images i print without a border)
(i do not whant to use workarounds, the kind of preparing "identity plates", a new one each for infinite variations of proportions to use as fullblown-up backgrounds..)
How do I get my photos printed? I select a photo but I get the maessage that no photo was selected.
View 2 Replies View RelatedEpson 3880.
Lightroom 4.
Moutain Lion.
All current.
I am trying to print on 5x7 paper. I set the page setup to 5x7. I have the margins set to .2" on each side. The layout image inside Lr looks exactly how I want it to.Then I print. I end up with a .125" margin on the left and top, and a .625" margin on the right and bottom.
It seems that, no matter how many times i save and update the profile, all the print setting (image size, sharpening, bit depth, color management, ...) are store within the preset, all but the Epson Driver settings, which have to be selected every single time.
I really can't remember if this bug was present in 4.0 or not (I'm currently running 4.1 RC), but I'm quite sure it was working OK under 3.x. Here's the thing.
I configure the printing settings and create. a profile: Profile1.I change all the settings and create a second profile: Profile2. The "Print Settings" settings are different, same printer, one for Color (Profile1), one for Advanced B&W (Profile2).I click on Profile1 (which was created with color Print Settings). Clicking on "Print Settings" or "Print", the printer settings selected under the epson driver is the ABW one (the one that belongs to Profile2).I reselect the correct setting from "Print Settings..." (Color).Click "Save" again.Righ-t click on Profile1 -> Update with current Settings. Setting seems to be saved.I then click on Profile2 and bam! The "Print Settings..." seems to be rverted to color instead of ABW.Update the correct settings, back to point #3
Can you reproduce this? This behavior is vanishig the power of the "Print One" button, unless you constantly print with tha same Driver settings.
---
Lightroom version: 4.1 RC [820174]
Version: 10.7 [3]
Application architecture: x64
Physical processor count: 4
Processor speed: 2,4 GHz
Built-in memory: 8192,0 MB
Real memory available to Lightroom: 8192,0 MB
Real memory used by Lightroom: 2388,3 MB (29,1%)
Virtual memory used by Lightroom: 4759,6 MB
Memory cache size: 866,7 MB
Displays: 1) 2560x1440, 2) 1680x1050
---
Epson R3000, latest OS X Epson Drivers.
How do I batch print several exposures at one time that differ in orientation (Landscape, Portrait) or print size (4X6 - 8 X10) or both orientation and print size? I currently have Lightroom 2.3 installed on a XP SP3 machine.
I have been unable to find any documentation on this subject.
My "Print One" button in the Print Module of LR3 is not activated. What is amiss and how do I reactivate the button?
View 1 Replies View RelatedI set up a print package in lightroom v4.1 and adjusted the image in the cell to fit properly, however when I try to print to file the resulting file moves the crop to cut off the top of my subject's head. It seems that I can get around this by intentionally moving the image so that it appears to cut off her head, then when it prints it looks correct (the adjustments im doing are moving backwards?). This works for now but I have no specific control over my crop, I just have to guess and check which does not work for large quantities of images
View 1 Replies View RelatedI am trying to print a 16" x 20" photo through Lightroom's print module. I am using an Epson 3880 printer and 17" x 22" paper. I have done this in Lightroom 4 with no problems. Now I am getting a print that is 16-3/8" x 20-1/2". I have the cell size set at 16" x 20" and borderless printing is turned off. I also checked zoomed to fill. This has also happened on a couple of 12" x 18" photos.
View 2 Replies View RelatedWas printing 4x6" from LR 5.3 fine. To an Epson 3880. Then went to Page Settings (MAC) changed paper size to 8.5x11". The preview responded with a larger page. I scaled the image up to 8x10 via lightroom cell size. But when I printed to the Letter size paper, LR printed only a close to 4x6" top left corner. This was not a full image like the 4x6. It was just a corner.
Exported to PS and printed fine.Can not figure why the print will not print the full image?
I get a pop up of "Save Files To Folder", but no file names are present, so "save" does nothing. I have all the boxes checked in Print Job, e.g. print to Jpeg file. I have searched, re-read Kelby etc. and come up blank. I have a profile entered for a custom lab.
View 1 Replies View Related