using the print module for the first time... I have 4x6" photo paper and I load it into my HP LaserJet P1102w correctly - but - I fail to see in the Lr3 Print Module where it gives me the paper size option to use a 4x6" paper" Closest fit is A6 which is not close enough.
View 3 RepliesWhen I print 11 x 17 paper on Epson R2880 in LR the image begins printing before the leading edge of the paper reaches the printerhead (not prininting borderless.) Only happens in LR and not PS. I am using the LR paper standards for borders.
View 1 Replies View RelatedI can't print with my own paper profile in LR4. The colour management option is not available.?
View 6 Replies View Relatedcompletely new to printing in LR.
View 4 Replies View RelatedJust recently, any prints I try to make on paper larger than 8.5 x 11 is offset, small or both using my epson 3880. Up until about 2 months ago it was fine. Also, the colors appear somewhat muted on the larger prints. Plus, I am still having a problem with prints being too dark but that is minor to the skewed printing. I still have LR 2 & 3 installed and tried using these programs with the same results.
View 1 Replies View RelatedI have downloaded and installed the icc profiles for my favourite Canson and Crane Museo papers on my new Macbook Pro but they don't show up in the options box in the LR 4 print module.
View 8 Replies View RelatedHow do I get a print to go to the edges of the page, and how do I fill in the area outside the margins with black. I would prefer not to have to go into PS to put the image on a black background, if possible.
View 6 Replies View RelatedI am useing a Canon Pro 9000 MKII and when I try to print 11x14 paper, it will not alow custom paper size. The Canon printer driver does have custom size but it does not show up in printer settings.
View 1 Replies View RelatedI have Windows 8 and am new to Elements 11. How do I get print to completely fill a 4 x 6 print paper?
View 5 Replies View RelatedWhat is the correct way to print a 16" x 20" print on 17" x 22" paper using LR5.
In LR4, using 17" x 22" paper, I used to set the cell size to 16" x 20" and print. Doing the same thing in LR5 gives me a slightly larger print.
I've printed a large Illustrator CS6 document to PDF (using Adobe PDF setting in print dialog box), and it looks just fine when I view the PDF. The problem is that some lines do not print when I try to print the PDF on paper. I've tried adjusting settings and printing to the PDF in different ways, but can't figure it out. Everything looks great on the screen, but some lines are missing once printed to paper. Others have tried printing the PDF as well and are also getting missing lines.
View 5 Replies View RelatedI have an image that should be 9.5 x 12 inches. I need to print it out that way to make a template for something. How do I do this?
View 5 Replies View RelatedHow do I set my paper space to print A3 am using autocad 2007 and have spend days trying to figure it out. How to I get a title block/template to fit A3.
View 4 Replies View RelatedRecently I noticed that when I print on a certain paper (Epson Premium Ultra Luster Photo Paper) that a blue tint is being printed on the paper along with the image. This seems to be occurring whether I use a standard .icc file or a customized .icc file for this paper. Am using Adobe CS5 to manage colors, rendering intent relative colorometric. Am using an iMac with 10.6.8. and Epson 3880 printer. The only thing I can think that changed is I upgraded from 10.5 to 10.6 a few months back. If you look along the sides of the image below you can see what I'm getting.
Just for the heck of it, I just printed the same image with Photoshop Elements 9, and I am not getting this blue cast.
I'm trying to print a flier on A6 paper on an HP CP1515n. I set the paper size in Corel 12 to A6, then set the paper size on the printer to A6. The paper feeds through very nicely - with nothing on it.
It works fine printing from MS Word so I am placing the paper correctly.
Using XP Home Edition SP 3.
I am currently printing on A4, then cutting into 4. I have found a cheap source of A6 paper but can't get my fliers to print.
I have autocad 2013 student version installed on a MacBook Pro with OSX mountain lion, worked properly, but now I can not print anything in paper, pdf, or preview. I just try re-installing the software, creating new layout, select the printer from "Edit page setup" menu, without any results.
View 2 Replies View RelatedAny way to print sheets from AutoCAD onto one sheet of paper, side-by-side?
The reason this came up is because yesterday I printed a half size set on our new plotter using twice the paper I needed. Each sheet printed on half of a 36”x12” sheet of paper (print is 18”x12”). I was throwing away 18” per print. What would be awesome is to be able to get another print onto that wasted 18”.
how to get two (or more) prints on one sheet of paper?
I am using an r1900 Epson a3 printer. I am trying to print my images on A3 paper however no matter what settings i change they always appear as a4. I have change the scale, fit to canvas and page set up all with no effect.
View 1 Replies View RelatedHow can I print my drawing on to black paper so all lines are white? Where can I change the color settings etc to do that?
View 9 Replies View RelatedIs it possible to add a custom paper size to Gimp? I have a new HP wide format printer and was looking for a capability to customize the paper size. Hewlett Packard and Microsoft have said that the customization of paper size is application specific even though Microsoft tells you can customize paper size through server properties , which on my XP machine will not save the custom settings.
Note: This page, even though it is not a Microsoft page, shows what Microsoft tells you to do. [URL]
Trying to get my Autocad 2010 to print to a roll of paper? I have a new printer and I have a 24 inch by 50 foot roll of paper and when I print it only lets me print 24 inches by 36 inches and it wont let me use the roll? I have a HP Designjet 130R
View 9 Replies View RelatedIf I print near the top margin of an A3 sized paper, only the Excel text won't appear, but everything else will.
I included a zip file with some pictures as well as a camera shot of the problem after printing.
Plotting Issue.zip
I am a student currently working on my year 12 project. I am wondering how can you print white on clear label paper?
View 2 Replies View RelatedI have an HP 6500A Plus, and it should be capable of printing edge to edge, even on custom sizes. After contacting both Apple (I am running MacOS 10.8 Mountain Lion) and HP for answers, I burned a lot of time with Adobe either just plain not getting an answer because I didn't buy it or being given the run-around. I need to know what Photoshop is doing to block the available capabilities from working.
View 6 Replies View RelatedSome paper companies have released a new paper size-9x13.
I find this excellant for fireworks and certain architecture prints.
Problem is that in CS6 I cannot adjust Set Up dialog to get entire paper printed correctly. The printer(both Canon's 9000mkii/9500mkii) always have a border. Red River(the paper I use) sez use 8x12 but there is no 8x12 setting.
the paper size in the CS6 Print menu (PS Manages Color) so the copy is inked 100%?
I have 1 large photo (33cm x 200cm) i like to print on A3+ paper. Not cropped or reseized, but on about 4 papers i can glue toether after printing and so get 1 large file.
So in all i'm looking for a way to print from PS cs5 so that , part by part, the image is split on the 4 sheets i like to use.
I can of course manually 'cut' the photo into 4 pieces myself, but i really hoped PS CS5 could do this job automaic for me.
Is their a way i simply did not find yet?
I was wondering if the 8.5 x 11 dimensions change at all when going through an inkjet printer, and if so, how much. I suspect this is not a significant issue with scale accuracy, but wanted to be sure.
View 3 Replies View RelatedShp file not printing in paper space, but WILL print in model space? This is Civil 3D 2013. If the issue was resolved by this method, please click on "Accept As Solution".
View 1 Replies View RelatedNormally I plot in paper space and everything works well. when I plot in paper space all the lines ae much, much lighter and almost invisible, whereas if I plot the same drawing in model space the plot comes out perfectly, though not in scale. I must have pushed a wrong button somewhere but wnat button is beyond me.
View 7 Replies View RelatedI`m using AutoCAD2004 with HP Designjet 800 Plotter.
The Plotter is connected to network.
I want to add some Custom Paper Sizes, however, when I open the options for the plotter(User-defined Paper sizes&calibration), I can`t add or modify paper sizes. The `Add` button is not available.
I set my computer to `Power Users` but still cant add. How to make the `Add` or `Delete` buttons usable?
My work entails regenerating new drawings from aging specification drawings and figures. Very little actual CAD, more hand-tracing JPGs than anything. I'm new to AutoCAD LT and haven't used most of its features. But the one feature I really need right now is to be able to print a black box on a sheet of paper.
As in, a 2-D closed polygon with a solid black fill. Unfortunately, AutoCAD LT doesn't think I should be allowed to print a black box on a sheet of paper.
I've tried assigning the color to the box using properties. I've tried defining layers and moving the box to the "black" layer (funny that "black" isn't a defined color in AutoCAD...that's way cool...). I've tried various settings in the Plotter setup screen.
I have a color plot table selected and I'm trying to print to .PDF. I work strictly out of the model view and do a lot of print previews. What am I, or have I, done, or not done, that I'm supposed to be doing, to print the box?