How do I get a print to go to the edges of the page, and how do I fill in the area outside the margins with black. I would prefer not to have to go into PS to put the image on a black background, if possible.
View 6 RepliesWhen I print 11 x 17 paper on Epson R2880 in LR the image begins printing before the leading edge of the paper reaches the printerhead (not prininting borderless.) Only happens in LR and not PS. I am using the LR paper standards for borders.
View 1 Replies View RelatedI have downloaded and installed the icc profiles for my favourite Canson and Crane Museo papers on my new Macbook Pro but they don't show up in the options box in the LR 4 print module.
View 8 Replies View RelatedHow do I change the default font that is used for printing "Photo Info" in the Print Module? The only option I can find is the Font Size option, but what determines the default font that Lightroom uses to print the photo info?
As far as I can tell there is no way to change the "Photo Info" color to something other than black, is this correct?
Illy and Photoshop, both of which are making me pull my hair out (much respect for graphic designers). I designed a simple letterhead with a horizontal bar that is supposed to go to the edge of letter size paper but when it actually prints, the bar doesn't extend to the edges. I have a bleed of .125 (1/8") set up so that I can extend this horizontal bar past the document edges so that when it prints, there are no funny edges. I'm printing at home on a non-commercial printer, an HP Color Laser Jet 5500 PCL 6. I've also made sure that the document is not scaled or "fit to page" before printing. And both printing directly from Illustrator and saving as PDF and printing produce the same result. Such a simple thing is driving me nuts.
View 2 Replies View RelatedIn LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedI wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
All was working OK and the printer is showing ink cartridges almost full In the Library Module the print review is fine.
Switch to Print Module and the print review is now blank (100% white)
Pictures no longer print
Windows 7
Espon Artisan 835 printer
LR5.3
I cannot seem to reset the print template screen while in the " Print " module. It has adopted the smallest pic size with three times the normal border. I wish to reset to full screen in print module
View 1 Replies View RelatedHow to ADD (almost) white Border around photo(s) to print in print module (not for creating a JPEG) WITHOUT TRIMMING the photo?
I dont understand why I'm so stupid not to be able to acheeve this simple task with Lightroom WITHOUT TRIMMING the image (altering it's proportion and cutting away photo-content)
(on light-gray backgrownd for instance, to use as cutting indications. I know how to use cutting-indications for images i print without a border)
(i do not whant to use workarounds, the kind of preparing "identity plates", a new one each for infinite variations of proportions to use as fullblown-up backgrounds..)
My "Print One" button in the Print Module of LR3 is not activated. What is amiss and how do I reactivate the button?
View 1 Replies View RelatedI am trying to print a 16" x 20" photo through Lightroom's print module. I am using an Epson 3880 printer and 17" x 22" paper. I have done this in Lightroom 4 with no problems. Now I am getting a print that is 16-3/8" x 20-1/2". I have the cell size set at 16" x 20" and borderless printing is turned off. I also checked zoomed to fill. This has also happened on a couple of 12" x 18" photos.
View 2 Replies View RelatedI get a pop up of "Save Files To Folder", but no file names are present, so "save" does nothing. I have all the boxes checked in Print Job, e.g. print to Jpeg file. I have searched, re-read Kelby etc. and come up blank. I have a profile entered for a custom lab.
View 1 Replies View RelatedCan you print the map showing your photo locations in the map module?
View 1 Replies View RelatedWith LR4, JPEG files can be processed from library module to develop module, and finally to print module without involving photoshop. This seems to be a very efficient, continuous workflow.
But I was confused about it when starting with raw files (e.g., NEF).. NEF files can be processed from library module to delopment module. Then, there would be next three options to proceed: a) export and save as JPEG, b) edit in Adobe photoshop CS5 for further improvement, or c) process in print module to print. My question is about the last c) option. When NEF files undergo from library module > develop module > print module, the image on the screen is still in "edited" NEF file (or "unsaved print" which is displaced on the top of the screen image). When printed, the picture was printed from "unsaved print" which its format is not defined. I wonder this is the correct procedure for processing and printing from NEF file without involving photoshop.
It's frustrating to be able to do just about everything in LR - but not quite. I'd like more text options for the printing module. For example, when I'm printing a limited edition print, I put the edition number in the bottom left corner, under the image, within the border of the print. The title goes in the middle, slighty larger font, and then possibly a watermark.
I can use the Identity Plate to create a nice looking title, but the Photo Info will only print in the middle with no options for positioning it anywhere else, or no options for other fonts.
I have just bought and installed Lightroom 5 and need to set my print size to A3 and in the future even bigger. I do not have the facility at home and need to have them sized correctly for the print shop so they do not have to waste time resizing them. I am at a loss how to do this. I cant find any settings for this size print. A3 is roughly 42 x 29.7 cm.
View 2 Replies View RelatedA few weeks ago I tried to print from the print module and instead of a picture showing up, there was a white space. I have uninstalled and reinstalled LR 3 times.
View 2 Replies View RelatedWhen I try to print a JPG from the Print module in LR 3.6 (and tried it also with 3.5), it does not always recognize the resolution settings. Most of the time (and I can't see what makes the difference) it prints the JPG to a 96 ppi resolution regardless of what setting I use for resolution.
View 6 Replies View RelatedI want to print a photo in 5x7in.I have a Epson Stylus Photo PX710W printer. I select it from Page Setup button.Then i select the paper size as 5x7in (13x18cm)
But i couldnt set the margins in same size.Left, right and top can be set as 2,8mm. minimum but bottom can set to 3,2mm.Zoom to fill and rotate to fitt both are selected.
Cell size is: 121,0mm. maximum size.
Cell widht is: 172,1mm. maximum size.
I uninstalled my Printer's drivers and software and reinstalled it, but nothing has changed.Then i reinstalled Lightroom but no changes.I use the latest Lightroom 5.3
I am trying to add new Epson ICC profiles to my lightroom4 print module. I downloaded them from Epson but I do not see them in my ICC list that exhists in the print module uner Other for color managment
View 2 Replies View Relatedget message in header that Libary Not responding. Cannot even get print to open - get the loading "circle" have waited a long time.
i have win 7 64 bit. 8 g ram
When I set a margin with the Print module (Lr v3), does it also include the "page bleed" dimension the printer requires for properly printing the bottom of the page?
The problem I'm having is with printing landscape prints and the left & right margins not being equal. I cannot find anything about the page bleed dimensions for my HP B9180 printer and maybe it varies a bit (1mm?) from one B9180 to another(?) In any case, is there a systematic approach for determining the page bleed for a printer? I imagine the only way to accommodate for the asymetry is to account for it in top/bottom margins, correct(?)
MBP Late 2011 running OS X 10.8.2
16 GB ram
300GB+ free
I last printed about a week ago. Trying to print now results in an immediate crash. Tried multiple photos from different cameras and different catalogs. Different printers including printing to pdf all crash immediately. Repaired disk permissions. Reinstalled the app. Reinstalled Mountain Lion, uninstalled (to trash, empty trash, shut down and reinstall, no dice).
Can print from MS Word no problem. Photoshop Elements 9 prints photos just fine.
Crashes in a variety of low to mid thirties thread (lowest I have seen is 28, highest is 35) but I have not checked every crash report for the thread number.
want to add text twice in print module, seems only option is identity plate and it cant be duplicated?
View 2 Replies View RelatedIs it possible to zoom in on the page you are creating in LR4? I intend to make a poster apx. 50x80 cm with a lot of small photos on it. Without a zoom it will be difficult to position each little photo correctly
View 2 Replies View RelatedWhen I try to switch to the Print module in LR 4, the program locks up. I am using Windows 7.
View 2 Replies View RelatedI am developing a flyer for my photography business. It is going to be printed in black and white on recycled craft paper card stock (light brown). I have seen examples of photos edited so that they are essentially just blacks - no whites - and they print really nicely on craft paper. See attached. Any way to do this in LR, and if so, how?
View 2 Replies View Relatedusing lightroom 4 in print module only filmstrip is grayed out and will not print, it is normal in other modes
i just upgraded the catalog to Lightroom 5 and i have exactly the same problem.
Whenever I try to enter the print module Windows tells me Lightroom has encountered a problem and needs to close. The print module worked fine some weeks ago, but now it doesn't. Everything else seems to work fine.
First thing I tried was to relaunch and optimize my catalog which didn't work.
I then tried to reinstall LR 2.4 with no luck. I then Downloaded and installed 2.6, still no luck.
I had cleaned the registry after the print module worked last time, so I reloaded the registry with those values, still no luck.
I then deleted Lightroom 2 Preferences.agprefs and let LR relaunch to create a new one. Now the print module works.
As I am not using the default catalog I went into preferences and pointed LR to my catalogue and then relaunched again thinking the problem was solved. But when I tried to go into the Print module LR crashed again.
I figured that since the Print module worked with the empty default catalog the error must lie somewhere in my catalog. I therefore went back and tried using one of my backup catalogs, but LR crashed again when I tried to access the Print module. I even went back and tried all my backup catalogs and a couple of the oldest ones does not cause LR to crash when going into the Print module.
I'm on Vista with 4 gb of RAM, using dual monitors, and I've tried reducing the resolution and using only one screen as well.
So, my question is what could possibly go wrong inside a catalog file that would cause LR to crash in one module only? And why is it that the backups saved even the month before I last used the print module also causes the problem? Seeing as how I've been using that very same catalog and having a working print module?
Out of nowhere, the 'Save As' function isn't available in the Print Module. I have updated to 4.4, restarted Lightroom, etc. I can still export the images, just not save as a jpg.
View 19 Replies View Related