If I print near the top margin of an A3 sized paper, only the Excel text won't appear, but everything else will.
I included a zip file with some pictures as well as a camera shot of the problem after printing.
Plotting Issue.zip
Can you set a bleed to get rid of the paper margin or do you have to make the image size larger than the size you want and trim once printed?
View 2 Replies View RelatedI have managed to great a canvas size for A4 paper and managed to put 4 different photos spaced roughly equally around the page. The problem comes when printing, when the page is printed I get a 1cm margin down the left side of the paper every time even though the preview print does not show this 1cm margin.
View 6 Replies View RelatedWhen I set a margin with the Print module (Lr v3), does it also include the "page bleed" dimension the printer requires for properly printing the bottom of the page?
The problem I'm having is with printing landscape prints and the left & right margins not being equal. I cannot find anything about the page bleed dimensions for my HP B9180 printer and maybe it varies a bit (1mm?) from one B9180 to another(?) In any case, is there a systematic approach for determining the page bleed for a printer? I imagine the only way to accommodate for the asymetry is to account for it in top/bottom margins, correct(?)
Is it possible to designate a full bleed print or a smaller bottom margin than .56in in the print module. How?
View 4 Replies View RelatedI've set my dimstyle in paper space. but any dimensions. How do i get them equal since i have some dimensions in model space and some in paper space.
View 2 Replies View RelatedI need labels of 50mmx20mm and I resize my tiff image and then paste onto an A4 page intending to copy paste until page is full.
1.Problem is if i use the ruler it shows that my image is only about 40mm wide even though the size boxes at the top clearly say it is 50mm?!!! see image
2. Is there an automatic way to fill apage with a specified sized image eg labels as the Impostion tab maxes out at 4x4(16up)?
I am useing a Canon Pro 9000 MKII and when I try to print 11x14 paper, it will not alow custom paper size. The Canon printer driver does have custom size but it does not show up in printer settings.
View 1 Replies View RelatedWhen I print 11 x 17 paper on Epson R2880 in LR the image begins printing before the leading edge of the paper reaches the printerhead (not prininting borderless.) Only happens in LR and not PS. I am using the LR paper standards for borders.
View 1 Replies View RelatedI have Windows 8 and am new to Elements 11. How do I get print to completely fill a 4 x 6 print paper?
View 5 Replies View RelatedHow do I set my paper space to print A3 am using autocad 2007 and have spend days trying to figure it out. How to I get a title block/template to fit A3.
View 4 Replies View RelatedI have autocad 2013 student version installed on a MacBook Pro with OSX mountain lion, worked properly, but now I can not print anything in paper, pdf, or preview. I just try re-installing the software, creating new layout, select the printer from "Edit page setup" menu, without any results.
View 2 Replies View RelatedAny way to print sheets from AutoCAD onto one sheet of paper, side-by-side?
The reason this came up is because yesterday I printed a half size set on our new plotter using twice the paper I needed. Each sheet printed on half of a 36”x12” sheet of paper (print is 18”x12”). I was throwing away 18” per print. What would be awesome is to be able to get another print onto that wasted 18”.
how to get two (or more) prints on one sheet of paper?
How can I print my drawing on to black paper so all lines are white? Where can I change the color settings etc to do that?
View 9 Replies View RelatedTrying to get my Autocad 2010 to print to a roll of paper? I have a new printer and I have a 24 inch by 50 foot roll of paper and when I print it only lets me print 24 inches by 36 inches and it wont let me use the roll? I have a HP Designjet 130R
View 9 Replies View RelatedI was wondering if the 8.5 x 11 dimensions change at all when going through an inkjet printer, and if so, how much. I suspect this is not a significant issue with scale accuracy, but wanted to be sure.
View 3 Replies View RelatedShp file not printing in paper space, but WILL print in model space? This is Civil 3D 2013. If the issue was resolved by this method, please click on "Accept As Solution".
View 1 Replies View RelatedNormally I plot in paper space and everything works well. when I plot in paper space all the lines ae much, much lighter and almost invisible, whereas if I plot the same drawing in model space the plot comes out perfectly, though not in scale. I must have pushed a wrong button somewhere but wnat button is beyond me.
View 7 Replies View RelatedI`m using AutoCAD2004 with HP Designjet 800 Plotter.
The Plotter is connected to network.
I want to add some Custom Paper Sizes, however, when I open the options for the plotter(User-defined Paper sizes&calibration), I can`t add or modify paper sizes. The `Add` button is not available.
I set my computer to `Power Users` but still cant add. How to make the `Add` or `Delete` buttons usable?
My work entails regenerating new drawings from aging specification drawings and figures. Very little actual CAD, more hand-tracing JPGs than anything. I'm new to AutoCAD LT and haven't used most of its features. But the one feature I really need right now is to be able to print a black box on a sheet of paper.
As in, a 2-D closed polygon with a solid black fill. Unfortunately, AutoCAD LT doesn't think I should be allowed to print a black box on a sheet of paper.
I've tried assigning the color to the box using properties. I've tried defining layers and moving the box to the "black" layer (funny that "black" isn't a defined color in AutoCAD...that's way cool...). I've tried various settings in the Plotter setup screen.
I have a color plot table selected and I'm trying to print to .PDF. I work strictly out of the model view and do a lot of print previews. What am I, or have I, done, or not done, that I'm supposed to be doing, to print the box?
I'm having a problem making paper size filtering 'stick'.
For years I've configured PC3 and their associated PMP files for each of our printers and plotters. As a part of the configuration, I filter out all the paper sizes we don't use. Once the PC3 and PMP files are configured, they're copied to all the local PC's. I've never had a problem with this, until now.
On the PC where the PC3 file is configured, the filtering is correct. On any other PC, various paper sizes are added. For instance, I'll filter out all paper sizes on printer "X" except for 8.5x11 and 11x17. On a similar PC, the paper sizes "16k 197x273mm" and "8k 273x394mm" are added.
If I point the PC's to a location on our network where the PC3 and PMP files are stored, I get the same results.
We have two OS's here - Win7 Pro and XP Pro. All OS's are kept up-to-date. All the Win7 PC's use the same version of the HP Universal Print Driver. All the XP PC's use the same version of the printer specific drivers.
We have a T790 44in, with 42" roll paper installed.
The thing I'm having trouble with, is getting it to act like it has roll paper. I can set custom paper sizes in the printer drives all day (such as 42" x 42") but this is only half way accurate, and can waste a lot of paper.
Is there a particular way to set the printer to use the roll paper?
im trying to do is print on standard 8.5" X 11" paper but for some reason it keeps cutting off the top and the bottom. ive tried changing the plotter settings around but to no avail. its like theres a certain amount that it refuses to pring on the bottom. no matter what, the is always a .5" gap at the bottom. i can get it to print to the very edge of the top. just having issues with the bottom. ive also tried using plot calibration and all of that is fine
See photo for what im getting. and yes its doing it when i make pdf's too.
How to set the printer setting in Autocad that only show ISO paper size only? Currently i am using HP DESIGNJET 800 42 and when i need to do plotting, it show me a bunch of unnessary of paper size list as shown in attachment.
View 9 Replies View RelatedI have a layout with a border that is alligned very well in the layout view (see attachement 1) but the whole thing somehow moves to the left when I preview the plot (attachement 2). I thought the dashed lines were supposed to indicate my printer's plot area. Is there a way to fix this anomanly? I have tried to play with page setup options, application options, but nothing works.
View 4 Replies View RelatedI have layouts set to print to a printer in the office, sometimes with different sized sheets. Everything worked perfect until we upgraded from Civil 3d 2013 to 2014. Where I'm gettin a problem now is publishing to PDF. It will cut off the left and right margins of the 11x17 sheets. I've tried everything and looked everywhere but can't keep it from doing that.
Is there anywhere to set the publish to PDF settings? I've played with the DWG to PDF.pc3 settings and no change.
how to print two separate A2 drawings side-by-side in A1 paper space on an HP plotter? I'm assuming that this would be handled by a third party print management software or something along these line. I'm looking for any solution to save on paper!
View 1 Replies View Related2 of 3 viewports in paper space do not show up in print preview, nor will they print. The viewports are all on the same layer, defpoint layer. Even if I create 3 new viewports and erase the old ones, still can only print preview one viewport and only one viewport will print.
View 6 Replies View RelatedHave a dwg with two layouts sheets that print to pdf in paper space - one layout works just fine the other NOT.
Both include one view port and a few small details as pdf underlays(@ 150 kb each) in the PAPER space layout.
The problem sheet - ran a very slow plot preview but it did complete a full view of the layout, then when selected to do the plot it never completes the pdf.
I tried a pdf plot of the same area in MODEL space and it previews just fine and plots to a pdf just fine.
I'm using AC 2011LT on a PC Every time I print to PDF or printer a line appears which is not visible on the model or paper space. It is even not visible when I preview the print before printing (again from model or paper). And on different layouts the line moves and sometimes doubles.
I have done all the regular things - all layers on, all unfrozen, all visible, etc, I've purged, regened, made a save as file, gone to another persons computer but still the same problem.
This is an issue for which no one in my office has any solution. We create all of our plan sets on E1 size paper. However, when we plot them for redlines we print to C-size to save paper. I know you can "publish selected layouts" to plot numerous tabs at a time. However, I am unable to figure out how to make them plot to a smaller size paper than what the page is set up for. Is there a way to plot all of the tabs at a smaller scale without plotting each tab individually?
We just recently upgraded to AutoCad 2014.