How do I set my prefferences so I can move to the next image after making an adjustment without having to hold the cntrl key? I ddint have to use the cntrl key in my older versions on my PC , but 3 & 4 I do. I use a Mac at work and dont need to hold the cntrl key. I edit 4 - 5 1500 image weddings a week and every "click" slows me down, and brings me one more click to carple tunnel.
View 5 Replies
I want to select part of an image with just one layer. Say I just flattened the image and have to move one part of. I select it with the rectangular select tool. It seems intuitive that I could then just move what I selected, but when I drag the selection, the selection itself moves without moving what is inside the selection.
If I then remember to click the move tool and try to move what's in the selection (seems to work sometimes, maybe when there's multiple layers?) the entire image moves.
The only way I can move part of the image over is if I make a selection and then cut it (ctrl X) then paste it.
How am I supposed to move part of the flattened image, is there a way I can set it to default to "When I select something, I can immediately drag that selected area around."
why does a layer move more slowly when using the arrow keys on the keyboard if the layer is a 'floating selection'? my Gimp moves layers MUCH more quickly when using the arrow keys if I go to 'to new layer' first! is this a problem or to be expected?
View 5 Replies View RelatedIn Illustrator CS6 I can't adjust how far a line moves when I move it using the arrow keys. I've gone to Preferences>General>Keyboard Increment and changed the amount, but the line moves the same distance no matter what I put in. Neither Snap to Grid nor Snap to Point are turned on.
View 3 Replies View RelatedHow can set that an object only moves per 1 pixel increments when moving using the arrows keys?I am designing a few web banners right now and when i move objects with the arrow keys to have them placed exactly, they jump with more then 60 pixels in one go making this exercise a bit useless.
View 3 Replies View RelatedImage size changes when moving an image between Lightroom and CC.
I opened a .dng image in LR and then opened it in the Develop module. I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
I click Cntl-E and the image opens in CC. There I click on Image > Image Size and the Image Size is 13.288 inches by 20.533 inches.
Why does the image size change?
I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
I have been using LR for quite a while, but all of a sudden when I crop a photo, the image slides to the left or right and out of view.
In the past when I move the crop frame the photo would not move, that way I can see exactly how much of the photo I am cropping.
I have tried doing searches regarding a setting, but all I get are answers about locking the crop ratio and that is not what I need.
I need to keep the entire image in view when I slide the crop window.
There is a tiny window which shows on an image being edited to enable you to scroll or move to different parts of the image instead of using shortcut keys. I cant find it on my screen anymore I found it very useful if i had to move through the image.
View 4 Replies View RelatedI'm evaluating Lightroom 5 during the 30 day trial and it's all cool except for this one big annoyance that I noticed immediately when trying to work on an image in Develop module. As stated in the title, moving any slider (exposure, highlights, noise reduction, etc.) causes the image to go very blurry for the duration of the slider movement. It goes immediately back to being sharp as soon as I stop moving the slider. This is super annoying, feels as though my eyes are going bad.
What's interesting is that the problem doesn't show up when I'm adjusting the Tone Curve directly, but it will get triggered if I'll expand and use the sliders underneath. So looks like a bug that only applies to sliders.
This doesn't happen at all in Lightroom 4.4, which I still have installed and can compare side-by-side.
As for the hardware, I'm using the 2013 Macbook Air with 1.3 GHz i5 CPU and 8 GB of RAM. The OS X version is 10.8.4 with all latest upgrades installed.
I've already tried optimizing the catalog, giving it more space (currently at 3 GB) and purging it. I'm not using Smart Previews, although I've turned them on for a moment to see if the problem persists with them on - it does. I've also re-rendered the 1:1 preview for the specific image I've been trying it on. Btw, the file is a NEF from Nikon D300 and I'm using the 2012 process (as was the case with LR4). Not sure what else might be relevant here.
I'm going to move my image library, catalog and ACR cache to an external drive so that I can work with a consistent set of files and edits on multiple computers. I know what I need to do to move the catalog, and I know how to move the image files to the new drive so that LR is aware of the move.
But what I'd really like to do is copy the image files to the new drive while leaving the existing images on the internal drive as a backup. As far as I can tell, LR doesn't support copying of images within the program. If I copy the files outside of LR, without deleting the originals, LR is going to conitinue to point to the orignal files on the internal disk.
So, if I right click on a folder in the Library module folder tree, there's an option to Update Folder Location, and this seems to do what I need it to do, although I've only tried it on a single folder. Will Update Folder Location work to relink an entire folder tree in one operation?
One related question: Where does LR store it's preferences? One of the catalog specific preferences is Standard Preview Size. My desktop has much higher res monitors than my laptop, so if this setting is stored in the catalog then I'll have to pick one value for both computers. I'm thinking it would be better to use the larger value, for the desktop, but I'm not sure how that will play on the laptop. (It would be nice if this were computer specific, rather than catalog specific.)
why doesn't the arrow leader disappear when I flip my arrow direction to the inside..
see image
Ok so im working on a project
An animated email signature where an image of an arrow moves from the left to the right of the screen - easily done with a few frames and animation in gimp the arrow needs to move behind a paragraph of text which has the persons name, work address, email and phone numbers.
So the question remains is it possible to have one fixed frame (persons contact details) in a project of say 20 frames (which make the moving arrow behind the text)?? AND can
I am new to corel draw. i m using corel X6. i m having one arrow image (ie) 12px width and 23px height
I need the arrow in the same size with 24x24px transparent bg.
There is no right pointing arrow beside keywords beginning with u and on to z. How do I make the right pointing arrow reappear?
View 5 Replies View RelatedIn Lightroom 5.3, in the Slideshow Module and in the Impromptu Slideshow, the left and right arrow keys should move the slideshow backwards or forwards respectively when pressed. However, in my copy of Lightroom 5.3, pressing these arrow keys while the slideshow is running or paused has no effect whatsoever. (The arrow keys work as they should)?
View 7 Replies View RelatedI'm wondering if it's possible to use the arrow keys to scroll up and down folders and presets? I'm starting to get RSI from the mouse. Is there a way? I can't work out how.
View 7 Replies View Related[URL] 41 seconds
I thought [in LR3} that navigation stayed in the selection in both loop and grid views.
But I could be mis-remembering from LR3?
I'm not new to lightroom. In every photo I go in to edit with the tools (any of them/all of them) my cursor only appears as the tool along the edge of my workspace. Once I move the cursor into about a half inch (on the computer screen) into the workspace my cursor becomes an arrow again, not allowing me to edit except for on the edges. I mean, I can drag the portion of the picture into the area in the workspace that allows my cursor to function as a tool, but this is not easy nor is it preferable in any way.
View 1 Replies View RelatedWhy don't arrow keys advance slides in LR5 slideshow module
View 1 Replies View RelatedIn LR5, Slideshow module, the arrow keys do not move to the next or previous image in the auto mode. They do work in the manual mode, but I need them to work in the auto mode as well.
View 5 Replies View RelatedThe view of the window of my Library is not the way it used to be. I miss for instance the zoom, compare, 'spray' tool etc. Recently I could add and delete items, but now I don't see the arrow to do this(?) Here's an actual view of the bottom of the window: I use lr 4.4rc (the problem occured in 4.3)
View 2 Replies View RelatedWhen in Library I have noticed a glitch. When using the right & left arrow keys to navigate the images, sometimes the keys do not work and I receive an error tone. To rectify the error I have to go out of Library and then back in again. The same sometimes happens when I am in the develop module.
View 12 Replies View RelatedI´m working with LR 4.3 for 3 month but since days the "correction" brush doesn´t work anymore. The overlay button is still active and the system reboot I tried more than once ;-). I miss this function and maybe one of you is able to prevent me from reinstalling.
View 2 Replies View RelatedAs a pro, I crop all my photos.I normally use the forward arrow to move through each image, but with the crop tool the forward arrow doesn't work for advancing to the next frame.It only adjusts the crop.This is extremely frustrating for me as it slows down my workflow.
Is there a one key shortcut, within the Crop Tool -- that permits us to move forward from frame to frame?I wish the forward key worked for this within the crop tool!
Is there an easy answer or a way to format something in Lightroom -- so I can have a one-key method to advance frames within the Crop tool?
When making a selection, I like to use the magnetic lasso tool. I usually zoom in on the image. I just hate it when you get to the edge of the image and you have to "manually" push the lasso tool against the edge of the image to give you get access to the rest of the image to select it. I always mess up and selection is ruined by the quick movement when more is opened....
is there any way to scroll the image up or down when you get to the edge of it and you still have to select outside of the window...
Maybe there's a key stroke that will allow me to scroll up or down or right or left without losing the amount that I've already selected.
I've just moved from CS3 to CS6. Previously, when working on a layer mask I could make the image active by Command – ~ . This doesn't work now - is there another keyboard shortcut for this? I use a Mac, OS 10.7.4.
View 3 Replies View RelatedI am the webmaster for my website i want to make images which move like ads in Google. Tell How i can make that in Photoshop.
View 2 Replies View Relatedi am the webmaster of my website i want to make images which move like ads in google.Tell How i can make that in photoshop
View 2 Replies View RelatedI have a drawing that contains an ecw image inserted through FDO. The image appears in the correct location when plotted at a smaller scale 1"=100', but when printing a larger area at say 1"=2000' the image is not in the correct location. It appears to be shifted when compared to linework that is present in the drawing. The shift is about 100'.
View 2 Replies View RelatedI have vista 64 bit installed, 4gb ram and a geforce 8400 gs.
photoshop opens ok, but when I open a image, only appears a gray window. and when i move the image box, the image appears, but when I stop moving it, it desapears again.. I know I can edit the image, because I can add a brush into it, and when I move the box the image is brushed.. And when I enter the filter gallery the image appears normaly..
i'm wanting to make some banners for my site, i just wondered how i would make a SIMPLE banner thew has moving text on it. Are there any guides out there?
View 1 Replies View Related
