There is a tiny window which shows on an image being edited to enable you to scroll or move to different parts of the image instead of using shortcut keys. I cant find it on my screen anymore I found it very useful if i had to move through the image.
View 4 RepliesI want to select part of an image with just one layer. Say I just flattened the image and have to move one part of. I select it with the rectangular select tool. It seems intuitive that I could then just move what I selected, but when I drag the selection, the selection itself moves without moving what is inside the selection.
If I then remember to click the move tool and try to move what's in the selection (seems to work sometimes, maybe when there's multiple layers?) the entire image moves.
The only way I can move part of the image over is if I make a selection and then cut it (ctrl X) then paste it.
How am I supposed to move part of the flattened image, is there a way I can set it to default to "When I select something, I can immediately drag that selected area around."
Image size changes when moving an image between Lightroom and CC.
I opened a .dng image in LR and then opened it in the Develop module. I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
I click Cntl-E and the image opens in CC. There I click on Image > Image Size and the Image Size is 13.288 inches by 20.533 inches.
Why does the image size change?
I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
I have been using LR for quite a while, but all of a sudden when I crop a photo, the image slides to the left or right and out of view.
In the past when I move the crop frame the photo would not move, that way I can see exactly how much of the photo I am cropping.
I have tried doing searches regarding a setting, but all I get are answers about locking the crop ratio and that is not what I need.
I need to keep the entire image in view when I slide the crop window.
How do I set my prefferences so I can move to the next image after making an adjustment without having to hold the cntrl key? I ddint have to use the cntrl key in my older versions on my PC , but 3 & 4 I do. I use a Mac at work and dont need to hold the cntrl key. I edit 4 - 5 1500 image weddings a week and every "click" slows me down, and brings me one more click to carple tunnel.
View 5 Replies View RelatedAfter intalling my new mouse (Logitech Corded Mouse M500) scrolling/resizing makes the image disappear in a short time 2-3 minutes. I read about it in older versions, only happens with this mouse.
How can I fix it? I've just brought the mouse, seems very good, the older one is unuseable (lacks accurancy due the cheap IR sensor).
If i zoom in image so it's bigger than "Fit on Screen" then if open/create or go to other opened image and return to 'zoomed' one, PS reposition area i see to right upper corner.
View 3 Replies View RelatedI'm evaluating Lightroom 5 during the 30 day trial and it's all cool except for this one big annoyance that I noticed immediately when trying to work on an image in Develop module. As stated in the title, moving any slider (exposure, highlights, noise reduction, etc.) causes the image to go very blurry for the duration of the slider movement. It goes immediately back to being sharp as soon as I stop moving the slider. This is super annoying, feels as though my eyes are going bad.
What's interesting is that the problem doesn't show up when I'm adjusting the Tone Curve directly, but it will get triggered if I'll expand and use the sliders underneath. So looks like a bug that only applies to sliders.
This doesn't happen at all in Lightroom 4.4, which I still have installed and can compare side-by-side.
As for the hardware, I'm using the 2013 Macbook Air with 1.3 GHz i5 CPU and 8 GB of RAM. The OS X version is 10.8.4 with all latest upgrades installed.
I've already tried optimizing the catalog, giving it more space (currently at 3 GB) and purging it. I'm not using Smart Previews, although I've turned them on for a moment to see if the problem persists with them on - it does. I've also re-rendered the 1:1 preview for the specific image I've been trying it on. Btw, the file is a NEF from Nikon D300 and I'm using the 2012 process (as was the case with LR4). Not sure what else might be relevant here.
I'm going to move my image library, catalog and ACR cache to an external drive so that I can work with a consistent set of files and edits on multiple computers. I know what I need to do to move the catalog, and I know how to move the image files to the new drive so that LR is aware of the move.
But what I'd really like to do is copy the image files to the new drive while leaving the existing images on the internal drive as a backup. As far as I can tell, LR doesn't support copying of images within the program. If I copy the files outside of LR, without deleting the originals, LR is going to conitinue to point to the orignal files on the internal disk.
So, if I right click on a folder in the Library module folder tree, there's an option to Update Folder Location, and this seems to do what I need it to do, although I've only tried it on a single folder. Will Update Folder Location work to relink an entire folder tree in one operation?
One related question: Where does LR store it's preferences? One of the catalog specific preferences is Standard Preview Size. My desktop has much higher res monitors than my laptop, so if this setting is stored in the catalog then I'll have to pick one value for both computers. I'm thinking it would be better to use the larger value, for the desktop, but I'm not sure how that will play on the laptop. (It would be nice if this were computer specific, rather than catalog specific.)
How can we moving telescope parts by HD solver ?
View 2 Replies View RelatedI've been making a model plane model in inventor 2012 from imported IGES geometry, and Realised that my sketches were not assigned to any part (and thus can't be lofted). Is there any way of moving the sketches to the newly created part without redrawing everything? I've tried dragging and dropping because it seemed to make sense, but alas, that had no success.
View 4 Replies View RelatedWhen I place parts in my assembly they are stuck in the position I place it and can only be moved once I mate it to another part of my assembly. I have only recently encountered this problem, as usually when I place a parts in an assembly I am able to simply click on the component and drag/move that part around to put it in a place that suits before I use any constraints.
What is the problem, have I clicked on some function unknown to myself which has disabled the ability to move parts/assemblies when I place them into an assembly?
So I have this assembly with all parts constrained properly yet it won't let the parts move the way they should under the constraints applied and it's telling me I have interfering constraints.
I checked the "broken" constraints over but they look fine. It's a relatively small assembly (10-15 parts), although the parts have been used in a previous assembly. Would this affect their behavior?
I have numerous step files which I have imported into an assembly. I now need to move all the imported files to a predefined UCS (not 0,0,0). I can do this manually by using the assemble command and selecting the centre point then selecting the centre point of the pre-defined UCS.
I have potentially thousands of parts to move in various assemblies, is there a way to do this using iLogic and if so, how?
How do I move a part of a picture that I cut, using the content-aware move tool, to a different picture?
View 1 Replies View Relatedhow do I move select parts of text? I have a "B" and a "G" that I put into Illustrator using the text tool. When I go to move the "G" onto the lower corner of the "B", it selects both letters and moves them as a block.
View 3 Replies View RelatedI have a script that is perfectly works in 2012 inventor pro version. It moves newly added virtual parts into the VIRTUAL_PARTS folder. Part of script is below:
Dim oFolder As BrowserFolder Dim oTopNode As BrowserNode oTopNode = oPane.TopNode() Dim oTopNodeOcc As BrowserFoldersEnumerator oTopNodeOcc = oTopNode.BrowserFolders For Each oFolder In oTopNode.BrowserFolders i = i + 1 Next If i = 0 Then oFolder = oPane.AddBrowserFolder("VIRTUAL_PARTS", oOccurrenceNodes) Else For Each oFolder In oTopNode.BrowserFolders If oFolder.Name = "VIRTUAL_PARTS" Then For Each oOcc In oAsmCompDef.Occurrences If TypeOf oOcc.Definition Is VirtualComponentDefinition Then oNode = oPane.GetBrowserNodeFromObject(oOcc) End If 'MsgBox(oTopNodeOcc(1).Name) oTopNodeOcc(1).Add(oNode) Next Else ' do nothing End If Next End If
In 2014 pro it works only once, when I add first virtual part. It creates a folder and moves it there. When I add 2nd virtual part it gives me a error
see screenshot below.
I can't move the assembly I'm building around without the parts moving out of place from where there constrained too. I manly use mate and flush constrains. I have to build a layout of a room later on with these assemblies in it and they must be able to be positioned where they need to be. How do you keep your constrain parts from moving out of place?
View 1 Replies View RelatedI have a bunch of parts that are almost identical except for a few minor changes each time. Most have already been created in Inventor. My problem is that I want to rotate the part so that a face that was once along the XZ plane will now be in the XY plane. Is there anyway to rotate it like this? I would like to do this so that when I bring it into Mastercam, I don't have to rotate it each time.
Crev64
Autodesk Inventor 2009
I have 17 years of Unigraphics / NX and 2 months of AutoCAD 2013 3D experience . I am designing a welded table that has lots of tubes to be aligned to each other. It appears that snaps do not work on solids and there is no way to do a point to point solid move in Inventor. Is there any way to select a solid, snap to a base point, then move or copy to a snap destination point of another solid? Does this need to be done in an assembly drawing? If so, do I have to create a file for each tube and then bring each of them into an assembly? I would like to draw the table as one part. Designing all the parts together. The lack of snaps is strange to me. I can only snap to end points in sketches. No midpoints?? I must be missing something very basic and easy. I have not tried an assembly drawing yet.
I have been working through hours and hours of training videos. Everything but move, copy and paste has been pretty easy. I think I need to find an AutoCAD to Inventor transition video. There are no training courses in my area. So I'm stuck with online training. This problem is never addressed and I can't ask the question on a video.
I'm working on some plumbing in an assembly and in the past I've inserted all the fittings and pipe into a main assembly. Then created a sub-assembly and moved all those parts into that assembly. However I cannot drag and drop the pipe fittings around in the browser window. So I'm unable to move them to a sub-assembly.
I last remember moving content center parts between assemblies in Inventor 2012 and I'm currently running 2013.
I am having some trouble with assemblies. What I want to do is, create multiple assemblies with moving parts and then assemble them all in one assembly. When I do this, the assemblies with moving parts come in as "blocks" and the parts will not move.
View 8 Replies View RelatedI want to do a sign with a moving shadow effect that hides/shows some parts of my sign. The effect I want is similar to the one that LiQuidSin uses in his sign. Anyone knows how to do this? is that with imageready?
View 2 Replies View RelatedA while back I took a Photoshop class and remember a lesson on where you could select a region of an image and save it for the web with a high quality and select another region of the same image and save it for the web with a low quality, so that the focal point was saved with a high quality and the background was saved with a low quality. I have no idea where my notes are from this class and can not remember at all how to do this. Can anyone direct me to a tutorial about this?
View 2 Replies View RelatedIn Elements 3 I could clone parts of one open image to another image. How do I do this in Elements 11?
View 2 Replies View RelatedWhen making a selection, I like to use the magnetic lasso tool. I usually zoom in on the image. I just hate it when you get to the edge of the image and you have to "manually" push the lasso tool against the edge of the image to give you get access to the rest of the image to select it. I always mess up and selection is ruined by the quick movement when more is opened....
is there any way to scroll the image up or down when you get to the edge of it and you still have to select outside of the window...
Maybe there's a key stroke that will allow me to scroll up or down or right or left without losing the amount that I've already selected.
I've just moved from CS3 to CS6. Previously, when working on a layer mask I could make the image active by Command – ~ . This doesn't work now - is there another keyboard shortcut for this? I use a Mac, OS 10.7.4.
View 3 Replies View RelatedI am the webmaster for my website i want to make images which move like ads in Google. Tell How i can make that in Photoshop.
View 2 Replies View Relatedi am the webmaster of my website i want to make images which move like ads in google.Tell How i can make that in photoshop
View 2 Replies View RelatedI have a drawing that contains an ecw image inserted through FDO. The image appears in the correct location when plotted at a smaller scale 1"=100', but when printing a larger area at say 1"=2000' the image is not in the correct location. It appears to be shifted when compared to linework that is present in the drawing. The shift is about 100'.
View 2 Replies View RelatedI have vista 64 bit installed, 4gb ram and a geforce 8400 gs.
photoshop opens ok, but when I open a image, only appears a gray window. and when i move the image box, the image appears, but when I stop moving it, it desapears again.. I know I can edit the image, because I can add a brush into it, and when I move the box the image is brushed.. And when I enter the filter gallery the image appears normaly..