3ds Max :: Moving Telescope Parts By IK Chains?
May 24, 2011How can we moving telescope parts by HD solver ?
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Moving Sketches Between Parts?
Feb 8, 2012I've been making a model plane model in inventor 2012 from imported IGES geometry, and Realised that my sketches were not assigned to any part (and thus can't be lofted). Is there any way of moving the sketches to the newly created part without redrawing everything? I've tried dragging and dropping because it seemed to make sense, but alas, that had no success.
View 4 Replies View RelatedAutoCAD Inventor :: Moving Parts In Assembly
Apr 8, 2013When I place parts in my assembly they are stuck in the position I place it and can only be moved once I mate it to another part of my assembly. I have only recently encountered this problem, as usually when I place a parts in an assembly I am able to simply click on the component and drag/move that part around to put it in a place that suits before I use any constraints.
What is the problem, have I clicked on some function unknown to myself which has disabled the ability to move parts/assemblies when I place them into an assembly?
AutoCAD Inventor :: Assembly Moving Parts
Mar 21, 2013So I have this assembly with all parts constrained properly yet it won't let the parts move the way they should under the constraints applied and it's telling me I have interfering constraints.
I checked the "broken" constraints over but they look fine. It's a relatively small assembly (10-15 parts), although the parts have been used in a previous assembly. Would this affect their behavior?
AutoCAD Inventor :: Moving Parts Using ILogic
Apr 4, 2013I have numerous step files which I have imported into an assembly. I now need to move all the imported files to a predefined UCS (not 0,0,0). I can do this manually by using the assemble command and selecting the centre point then selecting the centre point of the pre-defined UCS.
I have potentially thousands of parts to move in various assemblies, is there a way to do this using iLogic and if so, how?
Photoshop Elements :: Moving Parts Of Pictures
Nov 14, 2013How do I move a part of a picture that I cut, using the content-aware move tool, to a different picture?
View 1 Replies View RelatedIllustrator :: Moving Selected Parts Of Text?
Nov 16, 2012how do I move select parts of text? I have a "B" and a "G" that I put into Illustrator using the text tool. When I go to move the "G" onto the lower corner of the "B", it selects both letters and moves them as a block.
View 3 Replies View RelatedLightroom :: Moving / Scrolling To Different Parts Of Image?
Nov 5, 2012There is a tiny window which shows on an image being edited to enable you to scroll or move to different parts of the image instead of using shortcut keys. I cant find it on my screen anymore I found it very useful if i had to move through the image.
View 4 Replies View RelatedAutoCAD Inventor :: Moving Virtual Parts To The Folder
Dec 8, 2013I have a script that is perfectly works in 2012 inventor pro version. It moves newly added virtual parts into the VIRTUAL_PARTS folder. Part of script is below:
Dim oFolder As BrowserFolder Dim oTopNode As BrowserNode oTopNode = oPane.TopNode() Dim oTopNodeOcc As BrowserFoldersEnumerator oTopNodeOcc = oTopNode.BrowserFolders For Each oFolder In oTopNode.BrowserFolders i = i + 1 Next If i = 0 Then oFolder = oPane.AddBrowserFolder("VIRTUAL_PARTS", oOccurrenceNodes) Else For Each oFolder In oTopNode.BrowserFolders If oFolder.Name = "VIRTUAL_PARTS" Then For Each oOcc In oAsmCompDef.Occurrences If TypeOf oOcc.Definition Is VirtualComponentDefinition Then oNode = oPane.GetBrowserNodeFromObject(oOcc) End If 'MsgBox(oTopNodeOcc(1).Name) oTopNodeOcc(1).Add(oNode) Next Else ' do nothing End If Next End If
In 2014 pro it works only once, when I add first virtual part. It creates a folder and moves it there. When I add 2nd virtual part it gives me a error
see screenshot below.
AutoCAD Inventor :: Moving Assemblies With Parts Intact?
Jul 11, 2012I can't move the assembly I'm building around without the parts moving out of place from where there constrained too. I manly use mate and flush constrains. I have to build a layout of a room later on with these assemblies in it and they must be able to be positioned where they need to be. How do you keep your constrain parts from moving out of place?
View 1 Replies View RelatedAutoCAD Inventor :: Moving Parts In Part Environment?
Feb 14, 2013I have a bunch of parts that are almost identical except for a few minor changes each time. Most have already been created in Inventor. My problem is that I want to rotate the part so that a face that was once along the XZ plane will now be in the XY plane. Is there anyway to rotate it like this? I would like to do this so that when I bring it into Mastercam, I don't have to rotate it each time.
Crev64
Autodesk Inventor 2009
Photoshop :: [PS7]Rusty Metal Chains
Apr 27, 2004i'm creating a "rusty-metal thingy" design for my new website. it's almost finished, now i only need to know how i can draw them big rusty metal chains to keep my header, mid-section and my bottom-section from falling apart.
View 4 Replies View RelatedAutoCAD Inventor :: Moving Solids In Multi-body Parts?
Jan 26, 2013I have 17 years of Unigraphics / NX and 2 months of AutoCAD 2013 3D experience . I am designing a welded table that has lots of tubes to be aligned to each other. It appears that snaps do not work on solids and there is no way to do a point to point solid move in Inventor. Is there any way to select a solid, snap to a base point, then move or copy to a snap destination point of another solid? Does this need to be done in an assembly drawing? If so, do I have to create a file for each tube and then bring each of them into an assembly? I would like to draw the table as one part. Designing all the parts together. The lack of snaps is strange to me. I can only snap to end points in sketches. No midpoints?? I must be missing something very basic and easy. I have not tried an assembly drawing yet.
I have been working through hours and hours of training videos. Everything but move, copy and paste has been pretty easy. I think I need to find an AutoCAD to Inventor transition video. There are no training courses in my area. So I'm stuck with online training. This problem is never addressed and I can't ask the question on a video.
AutoCAD Inventor :: Moving Content Center Parts Between Assemblies
Aug 14, 2012I'm working on some plumbing in an assembly and in the past I've inserted all the fittings and pipe into a main assembly. Then created a sub-assembly and moved all those parts into that assembly. However I cannot drag and drop the pipe fittings around in the browser window. So I'm unable to move them to a sub-assembly.
I last remember moving content center parts between assemblies in Inventor 2012 and I'm currently running 2013.
AutoCAD Inventor :: Create Multiple Assemblies With Moving Parts
Jan 16, 2013I am having some trouble with assemblies. What I want to do is, create multiple assemblies with moving parts and then assemble them all in one assembly. When I do this, the assemblies with moving parts come in as "blocks" and the parts will not move.
View 8 Replies View RelatedAutoCAD Inventor :: How To Place Chains In Assembly
Jan 11, 2013How do i constrain the 4 chains from the frame to the center ring. I have managed to get this far .
View 8 Replies View RelatedMaya Animation :: Converging Two Joint Chains
Sep 12, 2013What I have is a Rig that has two Handles that control a joint chain each and I was wondering if there was any way to Converge both changes into the Joint in the center, because what i am trying to create is a dynamic bead loop. With it as it is the bones facing down are fine, but the ones facing upward falls to the "Floor".
Is there anyway that I can accomplish this or an easier to do this?
Photoshop :: Moving Shadow Effect That Hides/shows Some Parts Of My Sign
Jul 21, 2004I want to do a sign with a moving shadow effect that hides/shows some parts of my sign. The effect I want is similar to the one that LiQuidSin uses in his sign. Anyone knows how to do this? is that with imageready?
View 2 Replies View RelatedAutoCAD Inventor :: How To Place 4 Chains On The Top Bracket To A Ring
Sep 11, 2012I started to model up a lifting cradle but do not know how to progress further.I attached a 2013 version of model done so far. How can i place 4 chains on the top bracket to a ring?
View 7 Replies View RelatedAutoCad :: Dynamic Block Visibility / Lookup / Chains?
Jul 28, 2011I found this block online. I'm trying to do something similiar. I want the attribute to be dynamic (in context). The author of this block set a visibility and then 92) lookup actions, but only (1) lookup parameter.
SectionSample.dwg
GIMP :: Moving Selected Area Versus Moving Selection / Moving Whole Image
Mar 22, 2012I want to select part of an image with just one layer. Say I just flattened the image and have to move one part of. I select it with the rectangular select tool. It seems intuitive that I could then just move what I selected, but when I drag the selection, the selection itself moves without moving what is inside the selection.
If I then remember to click the move tool and try to move what's in the selection (seems to work sometimes, maybe when there's multiple layers?) the entire image moves.
The only way I can move part of the image over is if I make a selection and then cut it (ctrl X) then paste it.
How am I supposed to move part of the flattened image, is there a way I can set it to default to "When I select something, I can immediately drag that selected area around."
AutoCAD Inventor :: Replacing Parts With Custom Parts Created From Content Center
Sep 27, 2012I am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies View RelatedAutoCAD Inventor :: Showing Two Instances Of Parts List And Adding Custom Parts
Mar 30, 2012On the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
AutoCAD Inventor :: Creating Parts With Work Planes Defined By Other Parts
May 2, 2013I am working on an assembly that is designed around a box (bounding box) that could change size. I modeled the bounding box and placed it in a new assembly file. All other parts have been created within the assembly by referencing that bounding box with starting work plane and project geometry.
The problem comes in when I change the bounding box dimensions. The work planes for each additional part, which were defined by the faces of the bounding box, do not move when the sides move. Also, my projected geometry is not updating correctly. This is a simple box, with all 90° corners. So, all associated parts (at this point) are just rectangles.
AutoCAD Inventor :: Parts List Update When Modifying Model Parts In Idw
Aug 21, 2012My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Inventor :: Virtual Parts Weight Total BOM And Parts List
Aug 7, 2013I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VP bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
AutoCAD Inventor :: Display Density Of Materials Assigned To Various Parts In Parts List On Drawing?
Dec 9, 2013Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
AutoCAD Inventor :: Assemblies Showing In Parts Only Parts List
Jul 10, 2012I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
AutoCAD Inventor :: IDW View / Parts List Changes From Structured To Parts Only
May 3, 2013IV 2010 Suite
Been working over an idw MANY times due to project lag.Today I opened it up and tried adding balloons to an already ballooned assembly.
The parts list has not changed, and is "structured".But, if I try adding balloons, they tag each part, not the entire assembly.
Also, I verified this by trying to add another parts list, which defaults to "parts only".
I can't show my data set, b/c it's HUGE, plus it's proprietary.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
AutoCAD Inventor :: Parts Not Selecting For Parts List
Sep 22, 2011I have a .idw that I'm trying to make a parts list on. I select parts list and highlight everything. There are two screws that are not showing up on the parts list. I cannot select them manually either. It's acting like they are not there. Even if I do a complete parts list (adding the assemblies parts into one big list), they still don't show up.
How can I select these parts? What is wrong with them that they do not show up in the parts list?
AutoCAD Inventor :: How To Reuse Parts Rather Than Create New Parts
Jul 25, 2012I have been working with an assembly today where it is ideal to mirror parts and have figured out how to reuse the parts rather than create new parts. Now I find that when the parts are mirrored, they ate not retaining the mates. Where do I find the setting so they either retain their mates, or prefferably retain the mirror so that if I move the origional, the mirror moves as well?
View 9 Replies View Related