Lightroom :: How To Use LR With Phase One Files
Jun 22, 2013
Using LR with Phase One files?I use a P45 Phase One back and really would prefer to use Lightroom (over Capture One), but I also need to use the lens correction files for the way I shoot (wide angle lenses / technical cameras etc.)..... I know LR can now do this, but it only works with dng files; everything I've read tells me that the C1 conversion to dng is not a good conversion.
Â
I suppose I could always just make a few basic corrections in C1 and then export a 16 bit Tiff to work on in LR, but I'd rather work with raw files as much as possible?
View 9 Replies
ADVERTISEMENT
Aug 22, 2013
Phase One raw files can Lightroom read it?
View 4 Replies
View Related
Sep 11, 2013
I know the files are "supported", and will open. However, the quality is quite bad and nowhere near as good as opening the same file in Capture One. Also, long exposure shots see the "black frame" totally discarded and the images are extremely noisy. Phase One support say it's because LR and CS6 are only using a portion of the Raw file and to ask Adobe.
Â
I would migrate to LR5 today if there were a fix or an explanation. Capture One forkflow doesn't suit me. However, the quality is just too bad to accept.
View 2 Replies
View Related
Oct 31, 2011
I used the Lightroom beta 3.5 beta with CR 6.5 beta and now have installed the update of these two products. In beta I was able to open Phase One IQ raw files just fine but now with the 3.5 release I obtain a funny Magenta color cast that displays in the Library Mode and thumbnail but does not display in the Development Mode. This happens on both my Mac Laptop and workstation. Mac OS 10.6.8. I have not yet tried uninstalling LR and reinstalling, will do that next. The first image is in the Library mode after I have opened the file. The second is from the Development Mode. Notice how the tumbnail at the bottom remains constant but the small image on the left has changed in the Development mode to its natural look.
Â
I should say that this color cast happens after I adjust the temperature settings of the image, not just from mearly opening it in Development.
View 2 Replies
View Related
Mar 8, 2012
I've used Lightroom since the beginning but am having issues with LR4. One of the problems I am facing is that when I backup my LR database that it brings my entire system to a complete hault for over an hour. It seems to do that during the optimize catalog phase. I can't do anything else on my computer as my mouse and everything else freezes until the very slow backup completes. I didn't have this issue with any other version of LR. I first had this problem on my computer after upgrading my LR3. When I encountered this and other problems (mostly related to locking up or working very slow) I started with a fresh hard drive and re-installed windows and LR but still had the same problems.
Â
I'm using Windows Vista 64, 8gb of RAM, 2.83 Ghz, a fast drive with loads of extra space, etc. I do have a large LR database (7gb) but I had that in LR3 as well.
View 4 Replies
View Related
May 16, 2013
If I apply Sharpening to the DNG in the Develop phase, do I still need to apply it in the Export (to JPEG) settings?Â
View 11 Replies
View Related
Jan 13, 2014
Does Lightroom support shooting tethered with Phase One's IQ160? LR isn't detecting my IQ160.
View 2 Replies
View Related
Apr 25, 2012
Is there any way to automatically export only the pictures I've enhanced during the develop phase?  I was resolved to Ctrl-Click on the ones at the bottom filmstrip that I could 'see' that I had edited (about 15 out of a hundred) and then export to a subdirectory.  Maybe someway to filter that bottom filmstrip to only the pictures I've edited/enhanced?
View 1 Replies
View Related
Aug 4, 2009
Does dng provide lossless convertion from Phase One to dng file format?
Can you also convert it back from Dng to Phase One format without any loss of quality?
View 5 Replies
View Related
Apr 4, 2012
I have a project that has been completed in Revit. The designed facility needs to be split into two phases due to budget constraints. I have looked at creating two Phases - Phase I and Phase II. However the tricky part is having Phase II display greyscaled. Successful in having phase I greyescaled and displayed acordingly with Phase II. I have looked at the phase filters, but unsucessful in getting phase II to be greyscale since it is future work in the order of the phases.
View 6 Replies
View Related
Dec 5, 2012
I have a model with 15 floors and shaft objects in them. No matter what the Phase setting is for the shaft object the floor holes created by the shaft always show and cannot be eliminated with any Phase filter view control. We need to adjust shaft locations and would like to maintain the cutting by shaft object through all floors.
View 1 Replies
View Related
Feb 10, 2006
Nature of the problem: Following the recommended procedure, I get to the phase where you created a video file. However when I go to preview the file, its badly pixelated.
Properties of your source files: All are clips from unprotected DVDs and play fine when captured.
What devices are involved and their mode of connection: Direct from computer's DVD player/recorder.
Project Settings: As listed under recommended procedure.
Output format: Mpeg to be burned to DVD.
PAL or NTSC: NTSC
Error Codes (if any): None
System information: AMD 64 3500+ w/ Dual SLi 7800 GTs and 2 GB of RAM.
I suspect that its a setting somewhere that has been changed because on a prototype I made using some of the same clips it worked fine. Then just stopped and started pixelating out of the blue.
View 9 Replies
View Related
Sep 20, 2012
the situtation is splitting a floor face in the exiting phase to "paint" the floor tile pattern in the existing restrooms and then removing that once in the new phase and resplitting to "paint" the new pattern...
Â
is it possible to split a floor face in existing phase, paint it, then move to new face and un-split and paint it to create a new split and new paint?
View 1 Replies
View Related
Mar 18, 2011
Is there a way to demolish (new construction) an opening into a wall that is an existing phase (existing wall)?
View 6 Replies
View Related
Feb 20, 2013
I'm creating a floor plan of a simple remodel to show cutting a new door into an existing wall. Â The plan has ALL the info on it; existing, demo, and new. Â I have applied the Show All phase filter. Â The door jamb lines of the new opening don't show up (see attachment). I can add detail lines to take care of the issue but then these have to be managed.
Â
I am not interested in creating seperate demo and new views for such a simple project.
View 2 Replies
View Related
Sep 23, 2013
When I insert a new window into an exterior wall in the proposed phase, the demo phase drawings shows dashed lines on the faces of the wall, but no dashed lines running through the wall on the left or right of the window.  This makes it very hard to tell where the demo opening should be. Attached is a screenshot of this issue.
View 1 Replies
View Related
Nov 27, 2012
I am having trouble having objects set to 'Phase Created' = Existing to show a desired material. They are all a dark grey.
Â
I have gone into 'Manage', and "Phases" under 'Phasing', and under the tab, 'Graphic Overrides', changed 'Material' for 'Existing to "Phase - New". But this did not change anything.
Â
Where else does this get changed?
Â
Using 2013.
View 2 Replies
View Related
Oct 10, 2013
I am trying to import an updated phase (shown in yellow) into an existing site layout (grey) however I cannot get it to rotate round and fit correctly. I imagine it will involve using the rotate command and reference.
View 4 Replies
View Related
Nov 9, 2011
We use electircal elements in AutoCAD dwgs that have labels to indicate the status of the element by phase. For instance on a floor plan we might have elctrical outlets that are existing (E), new (N), demo (D), etc. How does one do this efficietnly in REVIT? Is there a way to assign a paramter to grab the phase of the object and then adjust a label accordingly? This would be ideal because over time the element s might move from one phase to another such as from new to existing.
View 2 Replies
View Related
Dec 31, 2013
Why new rooms show up in lieu of existing rooms when"show previous and demo" are set for the phase filter? Every single other existing element including doors, walls, windows, etc. show in the "show previous and demo" phase filter with the exception of rooms.
View 5 Replies
View Related
Oct 24, 2012
Will the current plugins for Sigma DP1/2 RAW files work with files from the DP1/2 Merrill cameras? And if not, is Adobe developing plugins for these cameras?
View 2 Replies
View Related
Mar 27, 2014
After many years of using LR this is the first time I've encountered this issue (see 1st screenshot below). LR is scrambling my files. The affected raw files open fine in other programs, including adobe photoshop cc (see 2nd screenshot).
View 15 Replies
View Related
Feb 25, 2013
Deleting files and saving files brings up an error message. Files can't be deleted from lightroom which makes editing a nightmare. Also Saving Files (raw of jpeg), brings up an error message everytime.
View 1 Replies
View Related
Mar 12, 2012
Following previous LR upgrades (3.2, 3.3, 3.4, 3.5 and 3.6), old files were automatically removed from the Program Files folder. However, I just upgrades from 3.6 to 4.0 and notice that the old files are still on my hard drive in the 3.6 folder. Do I need to keep these files or can I UNINSTALL LR 3.6?
View 5 Replies
View Related
Jun 22, 2013
When I try to export retouched files to hard drive files my Mac crashes and has to be force quitted. I thought this maybe a L'room 4 problem so I bought L'room 5 and it's still happening. What can I do?
View 3 Replies
View Related
Jan 12, 2012
The issue probably has to do with the differences in settings. I am using the 64 bit version of Windows 7.I imported a group of pictures with the XMP sidecar files generated with Lightroom v3. All the image files, a mixture of Canon Mark 5D II RAW and jpg files from my point & shoot UFO camera, imported without issue picking up all my tagging and GPS settings. When importing you are put into the Library module and from the Library module I could click on any RAW or jpg file, look at the meta data and view full screen.
Â
I then entered the Develop module with a jpg picture selected and none of my settings made it across. The process was set to 2012. I was able to try out the new adjustments and all worked very well.I then selected a RAW file while still in the Develop module and all hell broke loose.
Â
I got a tip window pop up, the film strip went orange, the rest of the app screen then became greyed out and then behind tip pop up a crash window containing this information appeared:
Problem signature:
Problem Event Name: APPCRASH
Application Name: lightroom.exe
Application Version: 4.0.0.1
Application Timestamp: 4ef2621d
Fault Module Name: MSVCR100.dll
Fault Module Version: 10.0.40219.1
Fault Module Timestamp: 4d5f034a
Exception Code: c000041d
Exception Offset: 000000000003c1be
[code]....
Â
There was no other path but to have the app close after that. Now since Lightroom has left off with the RAW file in the develop module when I restart the app it starts in the develop module with that same RAW image selected and I crash before I can change to a jpg.  I am probably going to have to delete and recreated the data file to use the app again
Â
After the all this I went back and checked to see how I had the catalog settings in LR 3 set because there were no sidecar files for the jpg images. I did not have the option to write settings to jpg and tif files but did have write settings to sidecar set. So I have a bit of a mystery why I have no sidecar files for jpg files when I should have based on the way the settings were. This probably explains why I had no issues at all with them in LR 4.
Â
I am going to get LR 4 working again and then import the same batch of pictures without any sidecar files and see if I have any issues. I will report back soon.
View 4 Replies
View Related
Feb 2, 2013
I'm using LR 4.3, and would like to know how to determine which .dat cache files are associated with a certain folder of images. I don't know programming code, and, when I open a .dat cache file, I cannot determine which image file it goes with.
Â
I've noticed that when I remove a folder from Lightroom, the cache files for the images in that folder remain, because the size of the cache doesn't change. I know I can flush the cache, but I don't want to have to reload tons of .dat files already present in the cache.
View 12 Replies
View Related
Feb 21, 2014
I recently lost some original files to a hard drive failure. Is there a way for me to retrieve some printable files from LR catalog files?
View 1 Replies
View Related
Oct 5, 2012
Lightroom 3.6 and Windows 7.Imported 164 source files that are in a specific collection. Updated the metadata. Now need to replace the source files with these updated files. Sounded like sync folders is what I should do. how do I get the collect in a folder so I can use the sync folder process?
View 6 Replies
View Related
Sep 10, 2012
I need to transfer my files from Aperture 2 to Lightroom 4 without losing the raw files. When I did it on my laptop they are now all Jpegs. I don't want this to happen on my desktop.
View 1 Replies
View Related
Jul 31, 2013
I am currently using a Nikon D7100 and recording my photos in the Raw/NEF-RAW format. Recently, whenever I am uploading my photos to Lightroom 5, my photos are changing to .dng files rather than staying in the NEF file. When I go and look back at my previous imports from the past few times, they are in NEF and NOT in .dng. Why is this doing this and how do I turn this feature off so that my files remain the same going from my camera to my computer through importation.Â
View 1 Replies
View Related
