make manual lens adjustment and hit the constrain crop checkbox sometimes nothing happens (not tick appears, grey borders remain) Somtimes you can tick it and nothing happens. Sometimes you can tick it nothing happens but then click off the photo and back on, and the box is unticked but the crop has been applied!
View 7 RepliesAs a pro, I crop all my photos.I normally use the forward arrow to move through each image, but with the crop tool the forward arrow doesn't work for advancing to the next frame.It only adjusts the crop.This is extremely frustrating for me as it slows down my workflow.
Is there a one key shortcut, within the Crop Tool -- that permits us to move forward from frame to frame?I wish the forward key worked for this within the crop tool!
Is there an easy answer or a way to format something in Lightroom -- so I can have a one-key method to advance frames within the Crop tool?
How do i keep the "Constrain to Crop" box checked by default? Every single time i import images into lightrooom i have to check this box and then sync. I could save so much time if it were automatically checked.
View 14 Replies View RelatedThis is a sudden change of behavior in Lightroom 4.4, Mac OS 10.7.5.
In the past, when I chose the crop tool, with the locked icon in the locked position, when I adjusted the crop, the crop was constrained to the original aspect ratio of the photo. Now, no matter what I do, the crop is kind of "partly" constrained. That is, I start with a vertical image, then drag the crop down so that the crop rectangle has a horizontal aspect ratio, I can drag up on the horizontal crop rectangle so that the original aspect ratio is no longer preserved. Until the aspect ratio has gone horizontal, the original aspect ratio is preserved. It doesn't matter if the lock is locked or unlocked, or whether I hold the shift key or not.
Here's an example:
at this point, the crop is still vertical, with aspect ratio constrained. It's still "as shot" and the padlock icon is locked
Here, the crop is now horizontal, but the aspect ratio is still constrained, "as shot" and still the icon is locked.
Now, things have gotten wonky. When the right edge of the crop hits the edge of the photo, it's possible to drag it upwards. The aspect ration is no longer constrained, and even though the padlock icon is locked the aspect is now "Custom"
As I said, this is new behavior which I have never seen since the version of Lightroom included the crop tool (I started at Lightroom 1.0). Like they all say "I haven't changed anything", but something obviously has changed. I don't believe this is correct behavior, or the behavior I've been used to for years. Is there any way to think this is the correct behavior?
I noticed it sometimes happens on some (most) photos, but not all, and will seemingly randomly start/stop working properly on photos that weren't/were working just minutes before.
When I have a large image and I try to crop it I cannot control where the crop is to take place. Sometimes I cannot make the selection as large as I want.
I am using CS
After opening a RAW file in ACR CS6, Win 7, the outline is constrained to a 3:2 box. When I drag down, it's a vertical 3:2 box. I try clicking on the crop icon at top, but there's no response. There's no drop down menu when I click the icon. Otherwise, ACR works fine, using the 2012 methods.
View 3 Replies View RelatedI normally crop to ratio 4:3 (8x6) for printing,but just very recently the crop does not stick to it's ratio when reaching the outer borders.(especially if changing orientation from Landscape to portrait).If pulled It just keeps expanding to almost a square ratio before it stops.Obviously the padlock is locked and it is something that never used to happen.
View 37 Replies View RelatedI'm cropping a few thousand pictures, and the crop tool is just sluggish.
Changing the crop or moving the picture behind the crop is jumpy, sometimes it needs seconds to change the display, which makes cropping pain to work.
Even after the picture is loaded and the lightroom rested some time, cropping is sluggish, which should not be, since the picture is fully in the memory and moving it around should be easy for the computer.
So how can I get the crop tool to move faster?
I'm using a Win7 Core i7-2600 with 16GB Ram, LR catalogue on Intel SSD, images on a fast SeaGate HDD, AMD Radeon HD 6800 grafics adapter, 30" (2560x1600) display. The files are NEF from a Nikon D800E, but the files from my D700 are slow, too.
when I click under the web gallery and I selected a flash gallery or imported web galley (example here is airtight simple viewver...) ... the screen in the middle box keeping black nothing more.it's when I click under flash gallery.there is no photo adding ...
Previously it worked I saw when I clicked under airtight post card viewer web gallery ... all my photo getting on the middle screen..Now it only works with HTML lightroom gallery.More when I click under preview in browser some gallery works but some not ... when I said not ... the result is a black screen in IE or Firefox ...
I tried to uninstall and re install lightroom but result is the same .
I just upgraded to LR 4.2...
It DOES see the camera, the camera settings and even triggers the camera. However, the image files are nowhere to be found.
I just installed lightroom 3.3 and I cant seem to get my trackpad (HP Envy laptop) to work inside of LR3.3. When i try to two finger scroll, LR shows a dynamic scroll graphic but the current pane does not scroll.
View 3 Replies View RelatedI could use my watermarks without any problems in LR3 but after checking out the trial of LR4 this works selectively on only some of my images. Looks to me like a bug
View 2 Replies View RelatedSo why in the world would I update Lightroom in the middle of a job.?
Before I was able to do in and touch up shadowy areas using (K) adjustment brush, but now it doesn;t seem to work. The radial brush does a good job for a defined area but for SPOT touching I have always used the the adjustment brush?
Is there a setting or am I missing something or is this a bug?
Tried to publish to face book in Lightroom 4 and 4.4 on both PC and Mac. You can create a new empty album in FB from Lightroom but Lightroom will not the allow you to select the album to upload the images. You just get an error message at the bottom of the screen telling you "error - no album selected" Wasted hours trying to get it to work as per Julian Kost video tutorial.
View 7 Replies View RelatedI haven't noticed this before. I know that in LR 4.4 image is scaled properly when export size is specified by megapixels instead of pixel or print size.In LR 5.3RC it does not work. The image is always exported as it's original size. Not sure how LR 5 and LR 5.2 was?
View 8 Replies View RelatedCan I get camera raw 7.2 for CS5 Photoshop without upgrading to CS6 photoshop ? Can I revert to Lightroom 4.1? It worked with my photoshop CS5 camera raw.
Come on Adobe, let's get this to work!
I am using lightroom 4 and 5 on a Mac. Although preview of photos to be imported is shown I only get the message that the import could not be carried out (1) and the option to save the data as a :txt file. This was with Lightroom 4. It started first with being unabel to import directly from the camera, then I swithched to inserting the SD card directly into the laptop. This worked only after first downloading to the desktop. Later this didn't work either. I thought the program had become defect. Preview still worked and export is fine. I therefore updated to Lightroom 5 in the hope that this would solve the problem. However everything remains the same. Import still doesn't work with photos of any format. e.g. jpg or RAW.
View 10 Replies View RelatedI recently bought lightroom 4.1. In the first days, everything worked. But now, the adjustment brush doesn't work anymore! What is the reason and what can i do?
View 9 Replies View RelatedI have the new Lion OSX. I have Lightroom 2.7. I am having issues with the colour picker. It will not leave the colour palette and let me select from the image. I have tried holding down my mouse key, but it won't leave the palette. This is in the adjustment brush..
View 2 Replies View RelatedWhen I "Edit in Photoshop CS6" (CMD+E), CS6 launches but the image isn't sent to CS6. I just get the default CS working space. I've been using LR4.1 since it came out and just got CS6 (I didn't have previous version of CS).
I'm running LR4.1, CS6, ACR 7.1 on a Mac.
Using the backslash shortcut doen not switch between view image before/after in my Dutch version of Lightroom 5.
My regional settings are dutch/belgium on a Windows 7
After having upgraded to LR5 the syncronization of the whitebalance doesn't seem to work. All the other settings syncronize as normal, but not the whitebalance. And the WB is checked, of course...
View 5 Replies View RelatedThe tethered capture doesn't seem to be working in lightroom 4.1 RC with the canon 5D mk3. The camera is detected with the correct name, but no camera parameter is recognized, and the camera can't take any photo.
I've experienced this both on Windows 7 64bits and Mac OS X. Importing canon 5D mk3 pictures works fine.
The "Edit In..." function doesn't wok when I choose Photoshop CS5 and select the "Edit a copy with Lightroom adjustments".
View 12 Replies View RelatedWhen I generate a 32 bit tiff (HDR) in PS CS5 from bracketed pictures within lightroom 4.1, import the tiff back into lightroom, adjust it in lightroom, and then send it back to PS (option "Edit a Copy with Lightroom Adjustments" selected) for further editing, the file won't open in PS. Opening the file directly in PS works, but without the adjustments made in lightroom.
I have tried the same with a 32 bit tiff from Photomatix. Same behaviour.
in print module main window for image control (not preview window in the left upper corner) is blank. what is the reason and how can be remedied? os Mac Lion 10.7.3 lightroom 4 ( the 3-rd version had the same problem)
View 8 Replies View RelatedLightrrom 4.2 can't use the right click, "edit in" photoshop CS6. I have tried edit, preferences, and created a Preset and pointed it to the CS6 photoshop.exe... still a no-go.
View 2 Replies View RelatedIt is supposed to get removed automatically, but nothing at all happens. CA removal works fine with all the other photos, just not those one taken with that lens.
View 1 Replies View RelatedUnchecking the "Remove chromatic aberration" after it had been checked and adjusted does not work in the sense that the removal remains active.
View 3 Replies View RelatedLR4.2 and "Do not import selected duplicates" does not always work. Running a Mac, 10.6.8, I am cleaning up hard drives, organizing old files. There are times lightroom 4.2 (and before) does not recognize already imported raws and does not gray them out. These are backed up cards and folders of of raw images. Why is the "do not import selected duplicates" check box not working???!!!
View 2 Replies View RelatedI tried to edit some raw files as layers in PS CC from LR5 (Photo>Edit in>Open as layers in Photoshop). I want to do this for blending layers. One file works but 2 or more files doesn't. PS opens and nothing happens. If have the latest versions of LR5 and PS CC.
View 3 Replies View Related