I could use my watermarks without any problems in LR3 but after checking out the trial of LR4 this works selectively on only some of my images. Looks to me like a bug
View 2 Replies
I've downloaded some new watermarks to my computer (into word) and they will display in my watermark editor in Lightroom 4. However, when I use those downloaded type styles, the copyright symbol displays in the bar below but does not display on my photo. I've also used alt0169 but it still isn't visible on my images.
View 2 Replies View RelatedI'm using Windows 8 and LR 4.3. My watermark does not appear on exported images eventhough the box is checked in the export presets. Also many typefaces available in MAC are not in Windows. Where I might find the same typeface I use on my Macbook and add to Windows?
View 1 Replies View RelatedI'd like to export images from Lightroom 4 with a watermark. It COULD be text, but I want to rotate the watermark 30 degrees. I can't see a way to do that in the watermark editor in Lightroom...
Alternatively, I created the watermark in Photoshop, put in the text, rotated it, and saved it as a jpeg. I can't get a clear background. It appears jpeg doesn't support that. SO, I saved it as a .png (jpg and png appear to be the only two formats supported for a graphic watermark in Lightroom). It looks FINE, except in Photoshop the text is WHITE, which is what I want in Lightroom, but every time I open the .png file in the watermark editor in Lightroom, it comes in with BLACK text...
How do I get a Lightroom export watermark with the text I want in the font I want, angled the way I want?
I recently purchased Lightroom 4 and I am having issues adding a watermark to my JPEG images!
I'm using a very basic Ariel Black text, medium size and very clear. The watermark appears fine in the photo preview but does not show up when exported to my Lightroom library file! If I export to a TIFF image it's fine but just not in JPEG.
Is it possible to watermark my images with their filenames in Lightroom 5?
View 2 Replies View RelatedIllustrator's Image Trace doesn't seem to work at all with large images. The attached image shows the following:
A) The original raster cropped tightly.
B) Converting the raster with default "Black and White Logo" settings. Results in 242 paths and 4792 anchors.
C) Adding a massive amount of white space and then converting the raster with default "Black and White Logo" settings. Results in 407 paths and 1620 anchors.
For whatever reason Illustrator can't seem to handle large images. This test shows it's not an issue with the image being too complex since all I've done is add white space and the file was saved without compression so there should be no noise.
This type of glitch started with CS6 with the new Image Trace tool. Maybe setting Image Trace into legacy mode?
However in LR5 when I did the same process to choose to watermark my exported images,it would not allow me to choose to turn on the feature and pick my watermark to use. I am still on the Trial version... I'm on a MacBook Pro
View 2 Replies View RelatedWhen stitching together a large panorama, the content aware tool doesn't work if the image is >30,000 pixels. When you use the tool on large images (after I have flattened the layers and using the magic wand to select a white area at the top), it runs through the process as if it is going to fill and then after the "fill" window completes, the selected area remains white.
I noticed on some other forum posts that jpg saving couldn't occur on >30,000 pixel width images, so I changed the image size to 29,999 (from ~39,000) and the content fill tool worked.
I would like to resize and watermark all of the image in a particular file. I understand that I can do this with Lightroom, but I do now know how.
View 1 Replies View Relatedwhen I click under the web gallery and I selected a flash gallery or imported web galley (example here is airtight simple viewver...) ... the screen in the middle box keeping black nothing more.it's when I click under flash gallery.there is no photo adding ...
Previously it worked I saw when I clicked under airtight post card viewer web gallery ... all my photo getting on the middle screen..Now it only works with HTML lightroom gallery.More when I click under preview in browser some gallery works but some not ... when I said not ... the result is a black screen in IE or Firefox ...
I tried to uninstall and re install lightroom but result is the same .
I just upgraded to LR 4.2...
It DOES see the camera, the camera settings and even triggers the camera. However, the image files are nowhere to be found.
I just installed lightroom 3.3 and I cant seem to get my trackpad (HP Envy laptop) to work inside of LR3.3. When i try to two finger scroll, LR shows a dynamic scroll graphic but the current pane does not scroll.
View 3 Replies View RelatedSo why in the world would I update Lightroom in the middle of a job.?
Before I was able to do in and touch up shadowy areas using (K) adjustment brush, but now it doesn;t seem to work. The radial brush does a good job for a defined area but for SPOT touching I have always used the the adjustment brush?
Is there a setting or am I missing something or is this a bug?
Tried to publish to face book in Lightroom 4 and 4.4 on both PC and Mac. You can create a new empty album in FB from Lightroom but Lightroom will not the allow you to select the album to upload the images. You just get an error message at the bottom of the screen telling you "error - no album selected" Wasted hours trying to get it to work as per Julian Kost video tutorial.
View 7 Replies View Relatedmake manual lens adjustment and hit the constrain crop checkbox sometimes nothing happens (not tick appears, grey borders remain) Somtimes you can tick it and nothing happens. Sometimes you can tick it nothing happens but then click off the photo and back on, and the box is unticked but the crop has been applied!
View 7 Replies View RelatedI haven't noticed this before. I know that in LR 4.4 image is scaled properly when export size is specified by megapixels instead of pixel or print size.In LR 5.3RC it does not work. The image is always exported as it's original size. Not sure how LR 5 and LR 5.2 was?
View 8 Replies View RelatedCan I get camera raw 7.2 for CS5 Photoshop without upgrading to CS6 photoshop ? Can I revert to Lightroom 4.1? It worked with my photoshop CS5 camera raw.
Come on Adobe, let's get this to work!
I am using lightroom 4 and 5 on a Mac. Although preview of photos to be imported is shown I only get the message that the import could not be carried out (1) and the option to save the data as a :txt file. This was with Lightroom 4. It started first with being unabel to import directly from the camera, then I swithched to inserting the SD card directly into the laptop. This worked only after first downloading to the desktop. Later this didn't work either. I thought the program had become defect. Preview still worked and export is fine. I therefore updated to Lightroom 5 in the hope that this would solve the problem. However everything remains the same. Import still doesn't work with photos of any format. e.g. jpg or RAW.
View 10 Replies View RelatedI recently bought lightroom 4.1. In the first days, everything worked. But now, the adjustment brush doesn't work anymore! What is the reason and what can i do?
View 9 Replies View RelatedI have the new Lion OSX. I have Lightroom 2.7. I am having issues with the colour picker. It will not leave the colour palette and let me select from the image. I have tried holding down my mouse key, but it won't leave the palette. This is in the adjustment brush..
View 2 Replies View RelatedWhen I "Edit in Photoshop CS6" (CMD+E), CS6 launches but the image isn't sent to CS6. I just get the default CS working space. I've been using LR4.1 since it came out and just got CS6 (I didn't have previous version of CS).
I'm running LR4.1, CS6, ACR 7.1 on a Mac.
Using the backslash shortcut doen not switch between view image before/after in my Dutch version of Lightroom 5.
My regional settings are dutch/belgium on a Windows 7
After having upgraded to LR5 the syncronization of the whitebalance doesn't seem to work. All the other settings syncronize as normal, but not the whitebalance. And the WB is checked, of course...
View 5 Replies View RelatedThe tethered capture doesn't seem to be working in lightroom 4.1 RC with the canon 5D mk3. The camera is detected with the correct name, but no camera parameter is recognized, and the camera can't take any photo.
I've experienced this both on Windows 7 64bits and Mac OS X. Importing canon 5D mk3 pictures works fine.
The "Edit In..." function doesn't wok when I choose Photoshop CS5 and select the "Edit a copy with Lightroom adjustments".
View 12 Replies View RelatedWhen I generate a 32 bit tiff (HDR) in PS CS5 from bracketed pictures within lightroom 4.1, import the tiff back into lightroom, adjust it in lightroom, and then send it back to PS (option "Edit a Copy with Lightroom Adjustments" selected) for further editing, the file won't open in PS. Opening the file directly in PS works, but without the adjustments made in lightroom.
I have tried the same with a 32 bit tiff from Photomatix. Same behaviour.
in print module main window for image control (not preview window in the left upper corner) is blank. what is the reason and how can be remedied? os Mac Lion 10.7.3 lightroom 4 ( the 3-rd version had the same problem)
View 8 Replies View RelatedLightrrom 4.2 can't use the right click, "edit in" photoshop CS6. I have tried edit, preferences, and created a Preset and pointed it to the CS6 photoshop.exe... still a no-go.
View 2 Replies View RelatedIt is supposed to get removed automatically, but nothing at all happens. CA removal works fine with all the other photos, just not those one taken with that lens.
View 1 Replies View RelatedUnchecking the "Remove chromatic aberration" after it had been checked and adjusted does not work in the sense that the removal remains active.
View 3 Replies View Related
