I haven't noticed this before. I know that in LR 4.4 image is scaled properly when export size is specified by megapixels instead of pixel or print size.In LR 5.3RC it does not work. The image is always exported as it's original size. Not sure how LR 5 and LR 5.2 was?
View 8 Replies
"You don't need export below 1 mpx because 512 mpix is enough for all".Are nobody need export files lesser than 1 mpix for web and previews?
View 9 Replies View RelatedExporting images in LR 5.3 with resize setting of "short edge" does not re-size the image at all when the option for "do not enlarge" is checked. Instead it simply exports the full sized image. This happens even if you are trying to downsize an image (in my case from a 24MP image to one that is 800px wide), in other words you are not enlarging the photos so the option for "do not enlarge" should not apply.
Other sizing options like "long edge" appear to work as expected.Have tried restarting LR but no effect. Have tried changing export setting and then changing back to "short edge", again no effect.
Will Corel6 (or later) ever be able to export to a web page directly since the HTLM export doesn't work (drops links). The Corel Web program, or what ever its name is, was a joke. Its amazing that Corel work puts its name on a program that you could not open a CorelDraw file.
My current work around is to export to a JPG and then import that into dreamweaver and add the links there, then post. A pain but it works.
I'm running Photoshop CC 14.1.1 on MacOSX 10.8.4 and I have the following problem:
The functionality 'Export for web' doesn't work and also it's not possible to open .png files. I've tried to delete the preferences 'Adobe Photoshop CC Settings' but that didn't seem to work.
I have a simple iLogic rule to save an IDW using SAVE COPY AS DWG. The rule was created in Inventor 2011 ilogic and was embedded in the IDW template. Trigger was set to activate when the new drawing file was saved. It no longer works and errors out in Inventor 2012. The template has been migrated to 2012 and so has the project file. The ilogic Code is given below. if some new settings in Inventor 2012 need to be changed for it to work? Or if you have an ilogic rule to do the same that works,
Get the DWG translator Add-In. Dim DWGAddIn As TranslatorAddIn DWGAddIn = ThisApplication.ApplicationAddIns.ItemById("{C24E3AC4-122E-11D5-8E91- 0010B541CD80}") 'Set a reference to the active document (the document to be published). Dim oDocument As Document oDocument = This Application. ActiveDocument Dim oContext As TranslationContext oContext = ThisApplication.TransientObjects.CreateTranslationContext oContext. Type = IOMechanismEnum.kFileBrowseIOMechanism ' Create a NameValueMap object Dim oOptions As NameValueMap oOptions.
[code]....
I have successfully finished 2 projects in Pre2, but today, Smoke started to crash when I forced it to save.
Stone&Wire is red, and won’t restart.
After typing
cat /usr/discreet/sw/log/sw_dbd.log
into terminal I got this:
unknownd830624e3a74:~ Tomi$ cat /usr/discreet/sw/log/sw_dbd.log
# Discreet sw_dbd log file - 1.0
# Started - (CET) Mon Aug 6 01:18:10 2012
# Hostname - unknownd830624e3a74
5246976 CoThreadPthread.C:200 08/06/12:01:18:10.310 Registered thread ‘Logger’
[Code] .....
I have rebooted several times, but no luck. I’m not a programmer, but as far as I understand, the problem is on a framestore. Funny thing is, the last saved version is still available in Smoke, everything is in place, and it plays normally, just when it comes to saving or exporting, it crashes, or refuses to export.
when I click under the web gallery and I selected a flash gallery or imported web galley (example here is airtight simple viewver...) ... the screen in the middle box keeping black nothing more.it's when I click under flash gallery.there is no photo adding ...
Previously it worked I saw when I clicked under airtight post card viewer web gallery ... all my photo getting on the middle screen..Now it only works with HTML lightroom gallery.More when I click under preview in browser some gallery works but some not ... when I said not ... the result is a black screen in IE or Firefox ...
I tried to uninstall and re install lightroom but result is the same .
I just upgraded to LR 4.2...
It DOES see the camera, the camera settings and even triggers the camera. However, the image files are nowhere to be found.
I just installed lightroom 3.3 and I cant seem to get my trackpad (HP Envy laptop) to work inside of LR3.3. When i try to two finger scroll, LR shows a dynamic scroll graphic but the current pane does not scroll.
View 3 Replies View RelatedI have a problem with CorelDraw X4, some tools like save, save as, copy, cut, export doesn't work.
View 10 Replies View RelatedI could use my watermarks without any problems in LR3 but after checking out the trial of LR4 this works selectively on only some of my images. Looks to me like a bug
View 2 Replies View RelatedSo why in the world would I update Lightroom in the middle of a job.?
Before I was able to do in and touch up shadowy areas using (K) adjustment brush, but now it doesn;t seem to work. The radial brush does a good job for a defined area but for SPOT touching I have always used the the adjustment brush?
Is there a setting or am I missing something or is this a bug?
Tried to publish to face book in Lightroom 4 and 4.4 on both PC and Mac. You can create a new empty album in FB from Lightroom but Lightroom will not the allow you to select the album to upload the images. You just get an error message at the bottom of the screen telling you "error - no album selected" Wasted hours trying to get it to work as per Julian Kost video tutorial.
View 7 Replies View Relatedmake manual lens adjustment and hit the constrain crop checkbox sometimes nothing happens (not tick appears, grey borders remain) Somtimes you can tick it and nothing happens. Sometimes you can tick it nothing happens but then click off the photo and back on, and the box is unticked but the crop has been applied!
View 7 Replies View RelatedCan I get camera raw 7.2 for CS5 Photoshop without upgrading to CS6 photoshop ? Can I revert to Lightroom 4.1? It worked with my photoshop CS5 camera raw.
Come on Adobe, let's get this to work!
I am using lightroom 4 and 5 on a Mac. Although preview of photos to be imported is shown I only get the message that the import could not be carried out (1) and the option to save the data as a :txt file. This was with Lightroom 4. It started first with being unabel to import directly from the camera, then I swithched to inserting the SD card directly into the laptop. This worked only after first downloading to the desktop. Later this didn't work either. I thought the program had become defect. Preview still worked and export is fine. I therefore updated to Lightroom 5 in the hope that this would solve the problem. However everything remains the same. Import still doesn't work with photos of any format. e.g. jpg or RAW.
View 10 Replies View RelatedI recently bought lightroom 4.1. In the first days, everything worked. But now, the adjustment brush doesn't work anymore! What is the reason and what can i do?
View 9 Replies View RelatedI have the new Lion OSX. I have Lightroom 2.7. I am having issues with the colour picker. It will not leave the colour palette and let me select from the image. I have tried holding down my mouse key, but it won't leave the palette. This is in the adjustment brush..
View 2 Replies View RelatedWhen I "Edit in Photoshop CS6" (CMD+E), CS6 launches but the image isn't sent to CS6. I just get the default CS working space. I've been using LR4.1 since it came out and just got CS6 (I didn't have previous version of CS).
I'm running LR4.1, CS6, ACR 7.1 on a Mac.
Using the backslash shortcut doen not switch between view image before/after in my Dutch version of Lightroom 5.
My regional settings are dutch/belgium on a Windows 7
After having upgraded to LR5 the syncronization of the whitebalance doesn't seem to work. All the other settings syncronize as normal, but not the whitebalance. And the WB is checked, of course...
View 5 Replies View RelatedThe tethered capture doesn't seem to be working in lightroom 4.1 RC with the canon 5D mk3. The camera is detected with the correct name, but no camera parameter is recognized, and the camera can't take any photo.
I've experienced this both on Windows 7 64bits and Mac OS X. Importing canon 5D mk3 pictures works fine.
The "Edit In..." function doesn't wok when I choose Photoshop CS5 and select the "Edit a copy with Lightroom adjustments".
View 12 Replies View RelatedWhen I generate a 32 bit tiff (HDR) in PS CS5 from bracketed pictures within lightroom 4.1, import the tiff back into lightroom, adjust it in lightroom, and then send it back to PS (option "Edit a Copy with Lightroom Adjustments" selected) for further editing, the file won't open in PS. Opening the file directly in PS works, but without the adjustments made in lightroom.
I have tried the same with a 32 bit tiff from Photomatix. Same behaviour.
in print module main window for image control (not preview window in the left upper corner) is blank. what is the reason and how can be remedied? os Mac Lion 10.7.3 lightroom 4 ( the 3-rd version had the same problem)
View 8 Replies View RelatedLightrrom 4.2 can't use the right click, "edit in" photoshop CS6. I have tried edit, preferences, and created a Preset and pointed it to the CS6 photoshop.exe... still a no-go.
View 2 Replies View RelatedIt is supposed to get removed automatically, but nothing at all happens. CA removal works fine with all the other photos, just not those one taken with that lens.
View 1 Replies View RelatedUnchecking the "Remove chromatic aberration" after it had been checked and adjusted does not work in the sense that the removal remains active.
View 3 Replies View RelatedLR4.2 and "Do not import selected duplicates" does not always work. Running a Mac, 10.6.8, I am cleaning up hard drives, organizing old files. There are times lightroom 4.2 (and before) does not recognize already imported raws and does not gray them out. These are backed up cards and folders of of raw images. Why is the "do not import selected duplicates" check box not working???!!!
View 2 Replies View RelatedI tried to edit some raw files as layers in PS CC from LR5 (Photo>Edit in>Open as layers in Photoshop). I want to do this for blending layers. One file works but 2 or more files doesn't. PS opens and nothing happens. If have the latest versions of LR5 and PS CC.
View 3 Replies View Related
