I need to rename a number of files to specific names which are not based on the current names. Simple to do outside of LR5 but I do not want to lose the related edit data which I believe to be the case if I do it outside of LR.
Assuming the name is stored in the metadata is there anyway to access that directly to perform the rename?
Why is LR4 requiring me to convert my files from the old process to the LR4 (2012) process for raw files imported directly from my CF card into LR4?
View 5 Replies View RelatedIf I use LR to import the RAW files directly from a CF card, there are preview images (but I don't know how to import and save to a different HDD yet so I am still transferring files with Nikon Transfer NX)), but if I use Nikon Transfer to move the NEFs to the HDD, LR reports that it can't read the RAW files. I am using the same NEF format as what I use with ny Nikon D300 (14 bit, uncompressed) and LR will read those files.
View 14 Replies View RelatedHow can I access PS CC directly without going through Bridge CC?
View 1 Replies View RelatedWhen I upload image files to my computer hardrive, they open directly into Lightroom 5. How can i prevent this?
View 1 Replies View RelatedI am trying to do a rename of several files at once, but I would like it to use a Custom Name WITHOUT a sequence on the first file. I should be able to select several files and the first file will get the custom name, the second file will get -2, then -3, and so on. If I select 30 files, the first file gets the custom name correctly, then the second file get -31, then -32, and so on. It is counting the number of files I have selected, and then renaming them based on that count!!
The way I have to do it now is to select the first file, do custom name, then select the rest of the files and do sequence.
Lightroom version: 4.4 [891433]
Version: 10.6 [8]
Application architecture: x64
Logical processor count: 4
Processor speed: 3.0 GHz
Built-in memory: 12288.0 MB
Real memory available to Lightroom: 12288.0 MB
Real memory used by Lightroom: 2508.2 MB (20.4%)
Virtual memory used by Lightroom: 4140.8 MB
Memory cache size: 1882.9 MB
Maximum thread count used by Camera Raw: 2
Displays: 1) 1920x1080, 2) 1680x1050
I just renamed all my files using Lightroom (select all; rename files)
Unfortunately, this did not rename the correponding xmp files. Since this is irrevercible, I'm now in a tight spot. I'm stuck this thousands of files with "lost" xmp files
(Also, it is very annoying that the renaming changes the file creation dates! This pretty much destroys my backup routine..)
I recently had a number of old transparencies scanned at a local service bureau and delivered as jpegs on disc. The images import just fine into Lightroom from the disc, but when I try to rename them, I get a dialogue box telling me I can't rename them "...because they are missing or not writable." Thinking, perhaps, that Lightroom was somehow trying unsuccessfully to rename them on the source disc, I tried downloading them to my computer first, ejecting the disc, then importing them into Lightroom. Same result. What am I doing wrong? How do I rename these images?
View 1 Replies View RelatedI set up a template to rename my files, the template was set up to show the date, a job ident and the city and state where the photo was taken. Everything works except I can not get the job ident to show in the name. I made sure in the metadata that the indent was there in the work flow section. I have gone back redone the template.
View 2 Replies View RelatedI imported a batch of file with the file name ©garylittle....nef I need to remove the ©garylittle from the name for the whole batch. F2 doesn't seem to do the job for me. I had before used Bridge becuase it has a much much more well developed file name faciltiy that LR does not have.
I guess one of my questions is "can I use Bridge and have it recognize renaming in LR?"
BTW, there are hundreds of these files so you can see I cannot do each one seperatly and even if I did, the F2 doesn't work right.
I'm actually using inventor 2012 and microsoft visual basic 2010 express, and i need to create some code so i can access and export all the information from the parameters list (values, names, tolerances... everything!) from a part i designed.
View 3 Replies View RelatedIf I select 5 files to rename it might rename 4 of them but not the 5th. If I try that one file by itself I get an error message saying it cannot do it. If I exit LR completely and try the file in Explorer I sometimes with still get the error message that dynamiclinkmediaserver.exe is using the file.
This is a real pain as I have over 400 video clips to tag and name and I have now spent two days on this issue.
I am using a Windows 7 Enterprise 64-bit,x laptop with 16 GB RAM.
I've noticed that the option for renaming files on import seems to be missing?
View 2 Replies View RelatedShould I rename my photo files prior to import to Lightroom 3? The filenames are disorganized on Windows 7.
View 8 Replies View RelatedIs it possible to have Lightroom rename the source images according to my custom naming convention?
I just imported 278 photos and they are all correctly renamed within Lightroom however the source files retained the original Canon generated names. I want to rename them for backup/in case I ever decide to stop using Lightroom/etc.
Last day i made a massive rename operation at all my DNG files with Bridge in order to reflect the capture date and hour in the filename. Then when i synchronize the Lightroom catalog all the develop adjustments was whipped-out.
There are any thing i can do to recover de adjustments?
Our workgroup is considering getting Lightroom to access files. We would like to be able to use it with the files we share on a server. Is this possible or does Lightroom only work with files stored on the hard drive of one computer?
View 9 Replies View RelatedAny way to batch rename a folder full of image files to reflect a specific column in an excel sheet? I have a client who I am shooting product photography for, but I need to rename these images to reflect the part number of each item. These are not in any sequential order.
Either using LR5, CS6 or Bridge.
I have LR installed on my MacPro and the Mac just died (graphics card issues). I'm going to just buy a new Mac, though I'm trying to figure out the best way to access everything in LR until then. All of the images and photos are stored on a separate internal drive that I can take out and access via a docking station.
1. Does the license for LR allow me to install a 2nd copy on my Mac notebook?
2. If I place a copy of the LR catalog file on my Mac notebook and plug the photos/videos drive into a docking station connected to my notebook, will everything open up?
I have Lightroom 3.6 and have lost some files in LIghtroom and on my harddrive. I can still see the images in Lightroom. I have tried to pull up my previous back ups but still can not access the files. Is there anyway to recover the images from LIghtroom?
View 3 Replies View RelatedI'm trying to figure out if it's practical to use Lightroom to access/manipulate files on network attached storage.
Specifically, suppose I've already generated the 1:1 preview files, and these preview files are on the local hard drive. Does it matter then if the raw files are located physically on a NAS v. on the local hard drive in terms of the speed of Lightroom and ease with navigating from image to image?
I'm looking for a way to transform 200 xcf files directely into pdf files.
I had some try with convert command, but my 300ko xcf file becomes 20.0Mb pdf file
Is it possible to use gimp directly from CLI ?
I tried to import (move) 2 images from desktop into Lr3.6, a jpeg and tiff but I got the message that cannot perform the imprt (paraphrasing).
problem is that now the images disappeared from the desktop and they are not in Lr either - thye are gone, not even in the trash.where the images might be? it's a Mac, 10.7.3
I'm trying to update my Smugmug Publish Plugin from version 2.0.3.1 to the current 2.0.7.0. I keep getting the message "Unable to perform Plugin Update. Failed to move the old plugin out of the way."
View 5 Replies View RelatedCS6, how do I open files in Bridge directly into Photoshop. The default is File Viewer or there is an option to open in Adobe RAW.
View 7 Replies View RelatedI Have down loaded up- dates so much so that you will not give me any more.But I still cannot load NEF Files on to Elements 10 Directly.
It just take a great deal of time down loading & turning them into TIFF files, is there an alternative without upsetting my bank manager?
I've been told that I shouldn't edit Adobe product files directly off of a server. At my previous job we did have problems with files becoming corrupted (inDesign in particular) when we used this editing method, so we were told to edit the files locally and then resave onto the server. However, at my new job, the IT department is a bit more savvy and I have yet to see many hiccups with our server. Other employees work directly off of the server and don't seem to have any real problems. What are the pros and cons to working directly off the server and working locally then resaving?
View 1 Replies View Relatedproblem when plotting files that have PDF images attached to them and are viewed through a viewport. When plotting, the publishing bar fills up but then stays filled and doesnt disappear. At this point AutoCAD is locked up and I see the file starts spooling. I have several PDF files attached that amount to no more than 500 kb, however, when spooling it racks up to 30mb before in sends it off to the plotter and it takes a very lenghtly wait (up to 60 min). Eventually it plots and sometimes it doesn't plot at all. After a while if I try cancelling the plot, it will start plotting but only half of the page and after that the entire operating system will lockup. We have several machines (6) and 2 plotters in a network and the plotters are shared. Is there a better and faster way to work with PDF xrefs? Could this be a networking problem instead of AutoCAD?
machine specs:
Dell Precision T3400
Intell Core Duo @ 2.33GHz
2GB RAM
OS: XP pro ver.2002 (w/ SP3)
AutoCAD Architecture 2012
Plotters:
HP Design Jet 1055CM
KIP 3000
When I try to open about 90% of my files, I can't. I get an error with a yellow caution triangle with an exclamation point. it says "Error Reading C:UsersSignsPlusDesktop.......
So I end up dragging everything to a new page. That works fine but it's a pain ending up with multiples of everything.
We are using Inventor 2012 and would like to read Solidworks 2012 files directly into the system. This can be done with Solidworks 2011 files but our vendor upgraded his software between the time he sent us test files to try the import and now. Can you tell me if the is a plug in or something that will allow us to read SW 2012 files or should we upgrade to Inventor 2013?
View 6 Replies View RelatedI'd like to make a contactsheet.
To do so, I first have to rename my files from numbers to letters, because otherwise the photo's are at a wrong place in my contactsheet.
I make numbers like: 01, 02 ,03 etc.
When I want to batch the files to rename them with letters, in bridge or with an action in photoshop, then all the files are at another order.
What I have to do so that I can rename it easily and that the programme does what I want?