Photoshop :: Open Files In Bridge Directly Into CS6?
Aug 4, 2013CS6, how do I open files in Bridge directly into Photoshop. The default is File Viewer or there is an option to open in Adobe RAW.
View 7 Replies
ADVERTISEMENT
Photoshop :: Can Open A Photo In ACR Directly From CS6 (not Via Bridge)
Apr 27, 2013I use LR4.4 for cataloging my photos and most of my editiing. Periodically I will go from LR to Photoshop CS6 (like most everyone) for additional edits. Can I open a photo in ACR directly from Photoshop CS6 (not via Bridge?)
I want to go directly from LR to ACR in Photoshop without going through bridge. It seems if I have to use Bridge, I loose the connection between LR and Photoshop.
Lightroom :: Prevent Uploading Files To Open Directly In 5?
Mar 17, 2014When I upload image files to my computer hardrive, they open directly into Lightroom 5. How can i prevent this?
View 1 Replies View RelatedCorelDRAW Graphics Suite X4 :: Unable To Open Existing Files Directly?
Oct 29, 2012When I try to open about 90% of my files, I can't. I get an error with a yellow caution triangle with an exclamation point. it says "Error Reading C:UsersSignsPlusDesktop.......
So I end up dragging everything to a new page. That works fine but it's a pain ending up with multiples of everything.
Photoshop :: How To Access CC Directly Without Going Through Bridge
Aug 30, 2013How can I access PS CC directly without going through Bridge CC?
View 1 Replies View RelatedPhotoshop :: Bridge Will Not Open Files In CS6
Oct 21, 2012Windows cannot find C:/Program Files (x86)/Adobe/Adobe Photoshop CS3/Photoshop.exe
I installed Photoshop CS6 Upgrade (64bit and 32Bit) to my PC which ran CS5 Extended. When I deleted CS5, Bridge stopped opening files, whether I double clicked on the file or did Open with: I get the same error message.
Photoshop :: Can't Open D90 NEF Files In CS3 Or Bridge
Jun 17, 2012I have recently upgraded to a Nikon d90 and i can no longer open any NEF files in photoshop or adobe bridge.
View 3 Replies View RelatedPhotoshop :: CS4 - Can't Open PSD Files In Bridge
Jun 17, 2013I cannot open .psd files in Bridge, only .jpg and .tif, as far as I know. The .psd files are flattened--no layers.
View 6 Replies View RelatedPhotoshop :: CS3 And Bridge - Cannot Open Raw Files
Jun 7, 2012Bridge and photoshop cs3 can´t open rawfiles after reinstalling.
View 4 Replies View RelatedPhotoshop :: Can't Open Bridge And Files In CS6?
Sep 14, 2012Can't seem to open bridge or find my files
View 1 Replies View RelatedPhotoshop :: Open JPG Files With Bridge RAW By...
Jun 17, 2009I am using CS4 Bridge 3.0.0.0.464 When I double click on a JPG file it opens in Photoshop. I prefer to edit my JPG files with Bridge camera RAW. At present, I have to right-click and choose 'open in camera RAW'. Is there a workaround for this?
View 9 Replies View RelatedPhotoshop :: Bridge Won't Open JPG Files In...
May 7, 2008I changed my preferences to remove the check-box "prefer Adobe camera RAW for Jpeg and TIFF files" , restarted Bridge and tried to open a JPEG from bridge directly into photoshop. But double clicking on the image in bridge opened "paint".
So I change the Bridge preferences back to Prefer ACR for JPEG again, restart Bridge, and then bridge tells me that it cannot find Photoshop CS2. CS2 is not even loaded on this machine anymore.
So then I go to the file type associations preferences and "browse" to the CS3 version of photoshop, restart bridge, and double click on a JPEG and it again says that CS2 cannot be found. I change the association again using the "browse" to CS3 and then it opens the image up in "Paint" again.
Why won't Bridge open JPEG's in ACR anymore?
Why won't bridge open JPEG's in Photoshop CS3 anymore?
Photoshop :: Disable Bridge Or Another Way To Open Brushes Panel That Won't Open Bridge?
Apr 19, 2012Whenever I try to open the Brushes panel, the Bridge window pops up. I know that Bridge is a media manager, so I'm not sure why is it opening. I really need to edit the brushes and I can't find a way to do it. Is there a way to disable bridge or another way to open the brushes panel that won't open bridge?
View 6 Replies View RelatedPhotoshop :: Why Won't CS6 Bridge Open NEF Files On Windows 8
Nov 30, 2013I have downloaded cs6 on a windows 8 pc and bridge wont preview my nef files even tho camera is listed in camera raw
View 1 Replies View RelatedPhotoshop :: Unable To Open CR2 Files In CS4 Or Bridge
Sep 22, 2013I can not open CR2 file in CS4 or Bridge. The CR2 images show in the preview window when I click the "open" button under "file". When I select the image to open I get "Unable to complete your request because it is not the right kind of document." I have uninstalled and re-installed the software, installed all the updates and get the same results.
View 1 Replies View RelatedPhotoshop Elements :: Cannot Open CR2 Files In 8 Or Bridge
Jul 13, 2013I shoot in RAW, and have always edited my pictures in Camera RAW via Elements 8. I recently upgraded my old Dell to a new Mac, and now I'm having trouble. I cannot seem to open the RAW files in Elements, this is what I get when I try to open a file with Camera Raw (I know it says Photoshop Raw, but I do have Camera Raw selected):
When I try to open a RAW file in Adobe Bridge, it's not even an option, it's grayed out. BUT, it will let me open jpegs in Camera Raw in Adobe Bridge! So confusing. So far I have tried updating the Camera Raw plug in. I followed the directions exactly, but no dice. When I look at the "about plug in" section on PSE, it shows that it is the updated version, 6.2.0.29. But when I look at a jpeg in Camera Raw through Adobe Bridge, it says Camera Raw version 5.0.
Photoshop :: Bridge CS3 To Show And Open Camera RAW Files?
Apr 11, 2012I am not able to see or open Raw files from my Canon 40D in either Photoshop CS3 or Bridge CS3. At first I was able to open RAWS in Photoshop and then I followed directions on the internet at how to manually replace a Camera Raw Plugin so I could open it in Bridge and now neither of the apps work with RAW. In photoshop It says that the file is not supported.
I looked up what plug in I needed and it said 4.2 for a Canon 40 D. I also followed the instructions in the read me file that was with the plugin download. No results from it. I even tried to switch it back to the old plug in to see if I could atleast get back the capiblility of opening it in Photoshop even though bridge was not working...still can't open it in either. What am I missing?
Photoshop :: Bridge CS6 Suddenly Slow To Open Files?
Jul 13, 2013Why is Bridge CS6 suddenly slow to open files?
View 1 Replies View RelatedPhotoshop :: Canon 5D Mk Lll/ Bridge CS6 / Camera Raw 7.1 And Still Can't Open The CR2 Files
Jun 7, 2012I have a Canon 5D Mk lll/Photoshop & Bridge CS6/Camera Raw 7.1 and I still can't open the CR2 files on my Canon.
View 1 Replies View RelatedPhotoshop :: Raw Files Saved To JPEG Via Bridge But Now Some Won't Open In CS5?
Oct 23, 2012I saved Raw files to jpeg via bridge but now some of the jpegs won't open in CS5, they only open in bridge? How do I get them to open up in photoshop instead?
View 3 Replies View RelatedPhotoshop :: CS6 / Files Open With Earlier Version Of Bridge?
Aug 23, 2012I installed Photoshop CS6 - 64 bit, but Bridge keeps opening up photos in my CS5 that is still on my computer. How do I change this so that it will open the photos in Photoshop CS6?
View 9 Replies View RelatedIllustrator :: Bridge Shows Complete Preview But Files Open Blank Or Missing Elements
Sep 6, 2012Using: CS6, Win7
After an external backup drive had its partition deleted we used recovery software to get as many files back as possible. It sorted the files by types but gave them all numbers for names. Using bridge to preview the illustrator files, most show a thumbnail, some just a small illustrator icon. When I try to open the files, some open no problems.
Some of the files are collections of vector art (multiple clipart in one file). In the preview that Bridge shows, the file is complete and all art is there. When I try to open some of these files, I get error messages like:
"Can't open the illustration. The illustration contains an illegal operand.
##.####.##
%##.####.####.###.....etc."
And when I click "OK" the file is either missing some of the artwork or it is completely blank. How does the preview show the complete file and when opened it's either missing elements or blank?
Photoshop :: Can't Open Bridge Or Mini-bridge
Mar 9, 2012When I try to open bridge or mini bridge in CS5 I get a message saying that the program can't find the JavaScript plugin.
View 10 Replies View RelatedPhotoshop :: Photoshop Won't Open Files From Bridge...
Feb 27, 2009Is there a reason Photoshop would start refusing to open any type of files from Bridge and Window Explorer? If I double click a .psd file, nothing happens. If I drag the file over to Photoshop, it gives me the 'no' symbol, circle with a line through it. The only way to get files to open is to do it from photoshop.
It's done this a few times before, usually if I shut Photoshop down and restarted it would work, not helping this time though.
Lightroom :: Unable To Open DNG Or RAW Into ACR 8.2 From 5.2 They Open Directly In PS CC
Sep 29, 2013Since I installed LR 5.2 I'm not able to open DNG or RAW files in ACR 8.2. They open directly in PS CC.
View 3 Replies View RelatedPhotoshop :: CS4 - Cannot Open JPGs Directly Into PS
Nov 8, 2008I'm using Vista 32. After updating to CS4 I can no longer open jpg files directly into PS by clicking on the file in windows explorer or an e-mail. After much searching and looking for file associations, I was able to get jpgs to open into Bridge from windows explorer, but still cannot get them to open directly in PS. When I attempt to open a jpg from an e-mail message, I get a window in Bridge pointed to a temp folder.
View 6 Replies View RelatedPhotoshop :: Can't Seem To Open Scanner To Scan Directly Into Program
Nov 17, 2012So I just finally updated my OS and my Photoshop and just encountered something I wasn't expecting. I have an Epson GT15000 scanner(big one with a feeder) I installed all the drivers and everything and the scanner works fine, but I can't seem to open the scanner from Photoshop to scan directly into the program. I can open the scanner independently and scan it to a saved file and then open it in photoshop. But it only has limited file type options so I'm basically forced to save it as one file so that I can then open it in photoshop and resave it as something else which is kinda a rediculous in between step and also leaves me with extra files that need to be deleted. Since the scanner itself hasn't changed and still functions the same otherwise I'm assuming it's because I'm using a new version of Photoshop. I'm also assuming that I actually can scan in the program, just not in the way that I'm used to. I used to go to import, and the scanner would appear on the menu for me to select it.
View 2 Replies View RelatedIllustrator Scripting :: Open Exported File Directly In Photoshop
Sep 18, 2013var doc = app.activeDocument;
var destFolder = Folder ("~/Documents");
if (destFolder) {
var fileName = activeDocument.name;
var destFile = new File(destFolder + '/' + fileName);
[Code] .....
This code I created exports my current Ai document as a PSD with set options. It also names the new file what it is called in Ai.
How can I call the created file and open it directly in Photoshop? Keep in mind I would be working on multiple files, so file names would change every time I ran this Export Script.
I could call a specifically named file and open that, but that's not what I need this script to do. I just need it to open the newly created PSD file.
Photoshop Elements :: 10 - Cannot Load NEF Files Directly
Oct 26, 2013I Have down loaded up- dates so much so that you will not give me any more.But I still cannot load NEF Files on to Elements 10 Directly.
It just take a great deal of time down loading & turning them into TIFF files, is there an alternative without upsetting my bank manager?
Paint Shop Pro :: Open Directly In Edit?
Nov 11, 2012When PSP opens i can see the workspace for manage. Other tabs there is adjust and edit. Is it possible that the PSP opens directly into the edit tab ? To begin with, I will just use edit.
View 3 Replies View RelatedGIMP :: Transform 200 XCF Files Directly Into PDF Files?
Aug 31, 2011I'm looking for a way to transform 200 xcf files directely into pdf files.
I had some try with convert command, but my 300ko xcf file becomes 20.0Mb pdf file
Is it possible to use gimp directly from CLI ?