I use lightroom with a very large image catalog. When I open lighroom I would like to be at the same point as I was before I closed lighroom or be at the very end (where the latest images are) of the catalog.
View 4 RepliesI recently installed LR4 on a maching that is running LR2.7. I would like to be able to view the LR2 catalog or images in LR4, but not necessarily convert all the photos to LR4. I have been told that I should not do a wholesale conversion of the images to LR4. I am not sure how to view the LR2 images in LR4 without converting the catalog. Is there a way to accomplish this without a wholesale conversion?
View 6 Replies View RelatedEverything I could find here talked about one-time creation of a new 4.1 catalog rather than adding 3.6 catalog to my growing 4.1 catalog. I held off converting everything until I had some time and experiewnce with LR4.1.
Now I have a moment to breathe and can move all the 3.6 stuff to 4.1. I started using Jeffery Friedl's Flickr publish under 4.1 but not 3.6 so no publishing in 3.6. I have no self-made presets so just converting all images to Process 2012 is OK with me. (I know some images will look different.)
How can I tell which catalog a missing image belongs to?
Beating a dead horse.....Everytime I need "missing images" in LR4.2, I cannot access them, even though I am looking right at the location they presntly occupy because thye image is ALREADY IN ANOTHER CATALOG.
HOW frustrating is this...going on 8 months now. But I need the images and I suppose I could just go back and reprocess 10,000 images that are missing in my collections but I have tried many solutions offered over the months that are just impractical.
If let's say one image is already associated with another catalog that houses that collection, ( and the collection is important because it has the edits), i want to go to that catalog instead.
Many of my catalog images (LR 3.6) do not show file size or pixel information for the associated image file. I suspect this is a hangover from an import of photos from Photoshop Elements which I used in the past. The problem is that when I put such an image in a slideshow or web gallery, the exported image is not properly displayed.
To get around this, I can export the image files to a hard drive directory in original format, and then re-import them into my web gallery collection. The correct file size info is then available in the catalog, and the image reproduces correctly in the exported gallery.
I know (or at least hope) this is a kludge, and there is a more straightforward method to correct the catalog. I have many photos with incomplete image information.
I keep all my image folders in one Master Catalog on one disk.
My system of filing is to have a main folder, say "Airshows", with sub folders named "Original-RAW Files" and "Finished Files".
Each sub folder is then further sub divided into "Show 1", "Show 2", "Show 3", etc.
This system also enable me to duplicate my files in such a way that they can be accessed by programmes other than Lightroom.
I also like to make Collections of specific planes which appear and therefore the Collections can include images taken at any number of individual shows but as LR3 keeps the Folders and the Collections in different sections, this entails looking in two different locations for any images taken at Airshows.Another disadvantage is that I believe LR Collections cannot be accessed by other third party programmes should I wish to change from Adobe.
I would like maintain my current filing system (which suits my purposes), but wish to find a way to file say,"Spitfire" Collection as "AirshowFinished FilesSpitfire" so that all files are kept together.
Is there a way to achieve this without resorting to making duplicate image files ?
I have created virtual copies of an image in Lightroom 4 and I am wondering what will happen to these if I delete the folder containing the master image and its virual copies from the LR4 catalog? Will the virtual copies be automatically deleted? If so, is this reversible in any way? Will i recover these virual copies if I add the folder back into LR's catalog later on?
Also will Adobe Bridge be able to read these virtual copies in both before and even after the folder has been removed from LR4? Or is the 'virtual copy' functionality specific to LR and that the only way to preserve it is to keep the original image within LR and never delete it?
I don't want to have the original files on both laptop and desktop.
I want to make a copy of a Lightroom 3 catalog to put on my laptop so while on the move I can be geo-tagging and keywording to 8000 photographs. I don't want to drag an external drive with me. I just want to be able to work on the catalog metadata and have all the updates/changes stored there (on the laptop)(in the catalog) and then transfer the catalog back to the desktop (to the primary archive) and have all the updates/changes pushed back into the DNG's or the XMP sidecar files alongside the CR2's. These changes would be only keywording and possibly writing GPS data into them….NOT image edits (that would probally require access to the original image files)
As a test, I tried "exporting as catalog", TWO images (with the source images "unavailable"). I flash-drived the resulting catalog to my laptop. I opened the catalog in LR3 and made changes to the metadata. I tried both "saving metadata to file" and "updating DNG previews" (which would be useless anyway since I could not write data back to the missing originals) and also tried doing nothing and just closing LR, then pulling the flashdrive and plugging it into the DESKTOP.(knowing the changes are stored within the catalog itself only) I open the 2 picture catalog in LR and see the keyword updates. Hurrah!
I switch over to the master catalog. All I want to do is import the updated metadata (keywording, contrast, etc…) back into the master catalog and push the data into the original DNG or XMP. On import I select "replace: Metadata and develop settings only" (with or without "preserve old settings" checked) and click import. Voila! NOTHING HAPPENS and the updated keywords are NOT picked up.
I know that the metadata updates were carried out because they showed up when I opened it separately in LR! For some reason they don't seem to making through the import process to the master catalog…
I will be managing a small portion of a client's overall image workflow by updating their web prescence on a regular basis with new work and retagging/uploading old work. I believe this requires the catalog and the image library to be housed on an external hard drive that can travel between the two of us. We are both working on PC's with LR 5.3.
The workflow would look something like this:
Client downloads new images onto external hard drive and imports into LR "ClientCatalog" is created Flags Picks and Creates a Collection from those Picks.Hard drive is handed off to me where I open "ClientCatalog".Make suggested edits to images add detailed tags and metadata upload to various social media sites and websites return hard drive to client
Is there potential problem with this workflow? My assumption is that if everything is housed on the external hard drive then there are no worries about the catalog containing all the latest updates. Are there any "safety protocols" you would add in to this workflow (besides mirroring everythign on another hard drive)?
I'm using Lightroom 1. I tried to merge catalogs by importing a catalog into a master catalog, but there were some problems. The one I noticed immediately was that the collections are not correct. It imported the collections, but for example one collection now has only 4 photos when the originbal had 140? How can I fix that? (Although not necessariy a problem, it seems to have the wrong number of photos imported too. It says the previous import was 3175 photos when it was more like 10,000.)
View 2 Replies View RelatedI had to reinstall an OS in my computer due to a virus. As a result LR 3 in no longer installed. I still have the catalog on a backup disk and have just installed and updated to LR 4.4. What is the best way to merge the V3 catalog with V4 and are there any things I should expect or look out for?
View 2 Replies View Relatednot able to view image from lightroom
View 3 Replies View RelatedI just took some images as both RAW and JPEG images thinking I would see them as separate images in LR4. However I see them as a single image with a file name that says RAW + JPEG. They are separate images in my folder but I can't import them as separate images.
View 2 Replies View RelatedI just completed working on about 30 images that started out as horrable lighting and color. Most of thhem are Nikon RAW images I would like to compare my finished edited images with the ones I started working with.
View 3 Replies View Relatedhow can I check the native resolution (ppi/dpi) and bit depth of my image files (jpeg, dng and pef)?
If it is not possible in lighroom, is there a free app for Mac that makes this possible?
i have an 8 giga LR4 catalog (about 300000 images).just installed the new LR5 and tried openning the LR4 cat in LR 5.it said it needs to upgrade, but in the middle of the prosses i had this messege: "lightroom encountered problems when trying to update the format of the catalog file and cannot use this catalog in this version of LR"
i saw that there is an option to export all my LR4 catalog as a new catalog and than import it into LR5.i haven't tried that yet since i'm worry that i might loose some info. will this process (of exporting and importing) keep all my LR settings? like develop user presets, keywords and collections?
I only want ONE cataglog. Today I installed and upgraded Lightroom from v. 3 to v. 4.3 which was OK.I wanted to upgrade my ONE and ONLY existing catalog keeping the same name.LR created a second catalog and added a - 2 to the name and it's a .ircat.
How can I return to having only ONE catalog and library?
My catalog 3 did not transfer to catalog 4. I tried to manually transfer files. Now I have as many as eight copies of some pictures, none of others.
View 1 Replies View RelatedI was wondering if it was possible to set a setting in Lightroom such that when looking through my images in the Library module, I only see the final edited image. For example, if I send the image to Photoshop to do any retouches, it creates a copy of the file. When I save the file in Photoshop, I then have two images in the Library module. However, I would like to keep all the history, but when browsing through my images I would only like to see the final image.
View 1 Replies View RelatedIn my copy of Lightroom 5.3, image info tooltips do not show in the grid view expanded cells even though that option is activated in view options. Is this an issue with Lightroom 5.3? (Note: Image info tooltips in grid view compact cells and the filmstrip do display, however.)
View 1 Replies View RelatedIs there any way to make the catalog display the pictures by Folder Location, rather than by Thumbnail view, every time I reopen it?
View 4 Replies View RelatedThe loupe view on the second screen used to display information about the photo. I double clicked on it and it disappeared and no matter what I do I can't seem to get it back.
On the primary screen this can be added/removed or changed in Library Module by selecting the menu view->view options... which gets you to a settings window where you can set what shows. However, I cannot seem to find a similar thing for the second monitor.
How to change the view in CS6 so that it is as sharp as my email program?
View 20 Replies View RelatedRecently when I upload photographs in Photoshop Elements 8, the images in the catalogue appear as an hourglass when viewed as multiple images, but when I zoom in to a single catalogue image the picture appears. Previous images in the cataloge appear as normal.
View 2 Replies View RelatedWhen I try to add a rating to an image, i get an error message: the requested change could not be completed because the catalog is corrupt. You can attempt to repair in file - catalog.
View 1 Replies View RelatedIf I have more than 1 catalog, can I start Lightroom with different shortcut so when I click it will start the propper catalog inestead of going to close and reopen the other catalog?
View 2 Replies View RelatedIf I create a LR Catalog on a macbook pro and then copy it to an external hard drive, can I then connect a PC to the external hard drive and open the catalog in Lightroom?
View 1 Replies View RelatedWhen I download LR 4 it subsumed my LR 4 beta catalog. How do I now get my LR 3.6 catalog into LR 4?
View 7 Replies View RelatedI am currently editing a large group of vacation photos using Lightroom 3. I have purchased a new computer and have installed Lightroom 5 on that computer. Can I copy the Lightroom 3 catalog to the new computer and use that catalog with Lightroom 5?
View 1 Replies View RelatedWe have 2 PC desktop and 1 PC laptop computers. If I change to a Mac laptop, will the 4.1 LR catalogs be the same for all 3 systems?
View 9 Replies View RelatedI inadvertently had "copy" selected when I imported some photos from an external drive. They were copied to my computer's hard drive. I deleted the folder on my hard drive and the photos in lightroom. Now when I tried to import them using 'add' they are grayed out as if I already imported them. How do I delete the catalog now so I can re-import them the right way.
View 1 Replies View Related