Lightroom :: How To Tell Which Catalog A Missing Image Belongs To
Oct 27, 2012
How can I tell which catalog a missing image belongs to?
Beating a dead horse.....Everytime I need "missing images" in LR4.2, I cannot access them, even though I am looking right at the location they presntly occupy because thye image is ALREADY IN ANOTHER CATALOG.
HOW frustrating is this...going on 8 months now. But I need the images and I suppose I could just go back and reprocess 10,000 images that are missing in my collections but I have tried many solutions offered over the months that are just impractical.
If let's say one image is already associated with another catalog that houses that collection, ( and the collection is important because it has the edits), i want to go to that catalog instead.
View 11 Replies
ADVERTISEMENT
Feb 16, 2014
Many of my catalog images (LR 3.6) do not show file size or pixel information for the associated image file. I suspect this is a hangover from an import of photos from Photoshop Elements which I used in the past. The problem is that when I put such an image in a slideshow or web gallery, the exported image is not properly displayed.
To get around this, I can export the image files to a hard drive directory in original format, and then re-import them into my web gallery collection. The correct file size info is then available in the catalog, and the image reproduces correctly in the exported gallery.
I know (or at least hope) this is a kludge, and there is a more straightforward method to correct the catalog. I have many photos with incomplete image information.
View 2 Replies
View Related
Nov 4, 2006
I have several different png files, each with a shape on a transparent background (for example a white square). So for example one has the square in the upper left corner, one has it in the lower right corner. When I copy and paste each separate file into a new file, each in a separate layer, each shape appears exactly where it is supposed to be. There are NO extra or hidden pixels. SO I have one file with two layers, each from the different png files, and the squares do not show up in the middle, but in the places where they are supposed to be.
When I tried to create my own (I use Photoshop CS2), when I copy and paste, the shape appears in the center unless I put an imaginary or hidden pixel in the opposite corner (and even then, the shape doesn't appear EXACTLY where I want it and is off a few pixels).
These separate files can do the same thing in all different programs (paint shop pro, photoshop elements, etc.). SO that no matter what program you use, when you copy each png file and paste it in a new file, it is placed where it is supposed to be rather than in the center.
HOW did they do it? Again, there are no extra or hidden pixels in the opposite corner.
View 1 Replies
View Related
Jan 26, 2013
I just opened Lightroom and was prompted to do an upgrade (4.3) now my catalogs are all gone. How can I get them back?
View 2 Replies
View Related
Sep 18, 2012
Upgrading to 4.1 and imported my 3.6 catalog.All the files and collections appear - but most thumbnails are missing. Many of the missing files are in storage off my PC on DVD. So I am thinking that the thumbnails aren't part of the LR3.6 catalogue (3.6 shows all thumbnails of files both on the PC AND storred off it on DVD once read in) but stored differently? If so, can I read them into 4.1 from 3.6?
If not I am concerned that we are deducing that maybe I will I have to read them all in again off dozens (and dozens) of DVD's?! Both a laborious task AND a bit of a shortcoming...err...to say the least in the way things have been put together maybe?
View 4 Replies
View Related
Mar 9, 2012
I've always had some problems with missing files in Lightroom (as in, they would go missing without me moving or renaming any files), but it was never anything too important so I ignored it. However, I recently got Lightroom 4 (used 3 as a trial just before 4 was released) - I had downloaded it as a trial, and today I enterted my Student/Teacher approved serial number. When I opened Lightroom, most of my files were said to be missing. When I go into an individual catalog.
But when I went into 'All Photographs', it appeared with all shots that were obviously also in the Auto Show album (side note: it seemed to have made duplicates without my saying so, but now they are erased - thoughts?):
Thing is, I basically imported the photos off my camera into Lightroom, then deleted the shots on the camera thinking they would be safe on my computer, so I have no idea where the primary location is for all my photos. I did move some folders around today, but none of which contain anything to do with Lightroom as far as I can tell. If I deleted anything, it was just export versions of the photos.
I should add that this is with ALL my my photos - not just certain ones.Where can I find the master location for all of these photos if it exists?
View 9 Replies
View Related
Oct 4, 2013
When opening LR3 a window appeared asking if I wanted to open a catalog titled Photoshop Elements (or something like that). I said no and then got another window asking to select a catalog. After considerable searching I managed to find what must have been an initial attempt to start LR (several years ago), and it contained about 400 pictures rather than the 100,000 plus it should have displayed. Also, can not find any backups although I backup about once per week. I've looked in all the usual places and the catalog I've been using for the last two years is missing, at least to me.
View 1 Replies
View Related
Jul 11, 2012
My workflow goes like this:I use LR3 to apply adjustments, occasionally a preset from say VSCO..While in LR I use, PHOTO > EDIT This photo in - PHOTOSHOP
I do my edits, ADD NOISE, SHARPEN.Then PHOTO > SAVE AS.I save the photo to my external.Here is the issue, when I re-open LR the photo is then present in my Catalog and there in LR to be viewed.... from here I export the final size for web etc and I am done
The photo that is now within my LR catalog is missing the NOISE I am added completely, and the SHARPENING is gone, or much less sharp then the photo I have saved in PS.
View 1 Replies
View Related
Apr 25, 2013
I have just moved my LR4 Catalog (Exporting as Catalog) from my Mac to an external Hard Drive. Now when I view the DNG Images in LR4 I notice that all of my adjustments e.g. (Exposure, WB, Camera Profil...etc,) are nolonger there! (hours of work missing). I have also noticed that all Virtual Copies are missing! The files are now as when I first imported into LR4.
View 2 Replies
View Related
Mar 22, 2014
After the latest update my catalog seem to be missing. My photo's are in Collections, but as soon as I want to work with them ; I get message Photo missing. (See attached.
If I try and find missing folder and check box - DON'T IMPORT SUSPECTED DUPLICATES - the tick goes away as if the photos are already imported. (See attached print screens.
View 4 Replies
View Related
Jan 22, 2014
I just updated to LR5 a few days ago. My school still has LR4, therefore im forced to work with my catalogs with their software. At home i have LR5 and whenever i want to continue my editing on Lightroom, the photos i worked on LR ( at school ) wont appear on my LR5 (at home).
View 5 Replies
View Related
Feb 26, 2013
I have checked the invisible files rebuilt the desktop, restarted loaded a back up from different drive - photos are in place but the lightroom folder is gone.
Yet the drive in question space, has not changed still full. I'm loosing a lot of work two three full days between backups had added a lot of new material.
my main question is How can I free up the 86 gigs of space this 'missing folder' is still taking up..sucks I'm seroius never seen this before.,228000 images were organized in that folder I had done a lot of work and was having issues generating previews due to space on drive was clearing space opptimized then did a 'get info' on the lightroom master folder just moments before lightroom crashed for third time today. Poof entire master catalog folder gone. Main drive size exactly the same.Seems isolated to lightroom..all aspects of my mac are fine.
Is there a file limit, folder implosion feature? I'm current and purchased just to do this organization.
View 6 Replies
View Related
Oct 9, 2013
I am using Lightroom 2. I have many photo folders on an external drive that show as off-line when I open Lightroom. I can see the photos in Lightroom but can not do anything with them.
How do I reconnect this folders that show off-line and have a ? mark?
View 4 Replies
View Related
Dec 27, 2011
So I was just importing all my xmas shots yesterday, and I kinda did it wrong in lightroom...as a result, the folder I created is now the "main folder" i.e the one that has all my photos under it, as subfolders and as a result, ALL my photos has now gone offline or missing.
The new folder I created sits on top of the hieracy, and I dont want that of course, I want it under my "2011" folder, which was the main... I cant move the new folder called "xmas 2011" and If i try to delete it, it says do you want to delete 2200 pictures, which is everything I have under the original "2011" folder...
Im pretty new to lightroom, and the file handling and renaming of libery's seems very confusing, but this is really bad and its ALL my pictures being listed as missing of offline
I tried to open via backup, but the lastest backup I can find is from Aug 2011, which I know isnt true, as I back up everytime I have used lightroom, but I cant find any other back ups !!
View 4 Replies
View Related
Dec 20, 2013
I have moved my pictures and my catalog from a Windows PC to a new iMac. The images have been moved, the image manipulation are there (separate XMP files ) The folders for the collections have been moved, but all images are empty. Not one picture is in my collections.
View 2 Replies
View Related
Apr 15, 2012
Using LR4 (not 4.1) and Win7 Home Premium. Catalog had been upgraded from LR3 and LR4 catalog was working fine until now. I've been using LR since the beginning.Two problems, probably related. 106K photos over two drives, almost 3Tb.
At the catalog level, there are no previews. Normally previews of all 106K photos would be displayed. Message is "Click the "import" button to begin." Filter function does not work Message: "No photos match the filter".At the drive level, there are no previews. Message is "No photos in selected folder" Filter function does not work Message: "No photos match the filter". At the folder level, everything is fine, except two folders give the same message "No photos in selected folder" Filter function does not work in these two folders: Message: "No photos match the filter" 14K photos between the two bad folders. Dozens, hundreds, of other folders and subfolders are fine. Filter function works fine at folder and subfolder level. Collections are fine, including photos in the two folders giving the mesage "No photos in selected folder"
Tried to import the missing folders. Won't import because they're already in the catalog. Won't import even if I uncheck "Don't import suspected duplicates". Exported as a catalog one of the "No photos in selected folder" folders. It appeared to create a viable catalog with previews, search filters, etc. I edited a few photos with no problems. Although it did give a message saying several hundred previews were missing. But they seem to be there anyway.Deleted the folder from the catalog and imported from catalog the working folder catalog that I just created. Exported as a catalog the other "No photos in selected folder" folder. Same result as the first bad folder. I.e. It appeared to create a viable catalog with previews, search filters, etc. Although it did give a message saying several hundred previews were missing. But they seem to be there anyway. Haven't done anything with this second folder catalog. Intriguing, the same message about missing previews. The actual files and *.xmp files are in the bad folders.
View 1 Replies
View Related
Nov 10, 2013
I use lightroom with a very large image catalog. When I open lighroom I would like to be at the same point as I was before I closed lighroom or be at the very end (where the latest images are) of the catalog.
View 4 Replies
View Related
Jul 1, 2012
Everything I could find here talked about one-time creation of a new 4.1 catalog rather than adding 3.6 catalog to my growing 4.1 catalog. I held off converting everything until I had some time and experiewnce with LR4.1.
Now I have a moment to breathe and can move all the 3.6 stuff to 4.1. I started using Jeffery Friedl's Flickr publish under 4.1 but not 3.6 so no publishing in 3.6. I have no self-made presets so just converting all images to Process 2012 is OK with me. (I know some images will look different.)
View 2 Replies
View Related
Aug 31, 2012
I keep all my image folders in one Master Catalog on one disk.
My system of filing is to have a main folder, say "Airshows", with sub folders named "Original-RAW Files" and "Finished Files".
Each sub folder is then further sub divided into "Show 1", "Show 2", "Show 3", etc.
This system also enable me to duplicate my files in such a way that they can be accessed by programmes other than Lightroom.
I also like to make Collections of specific planes which appear and therefore the Collections can include images taken at any number of individual shows but as LR3 keeps the Folders and the Collections in different sections, this entails looking in two different locations for any images taken at Airshows.Another disadvantage is that I believe LR Collections cannot be accessed by other third party programmes should I wish to change from Adobe.
I would like maintain my current filing system (which suits my purposes), but wish to find a way to file say,"Spitfire" Collection as "AirshowFinished FilesSpitfire" so that all files are kept together.
Is there a way to achieve this without resorting to making duplicate image files ?
View 4 Replies
View Related
Jun 6, 2013
I have created virtual copies of an image in Lightroom 4 and I am wondering what will happen to these if I delete the folder containing the master image and its virual copies from the LR4 catalog? Will the virtual copies be automatically deleted? If so, is this reversible in any way? Will i recover these virual copies if I add the folder back into LR's catalog later on?
Also will Adobe Bridge be able to read these virtual copies in both before and even after the folder has been removed from LR4? Or is the 'virtual copy' functionality specific to LR and that the only way to preserve it is to keep the original image within LR and never delete it?
View 3 Replies
View Related
Apr 14, 2013
image files are offline or missing, how do i correct this?
View 2 Replies
View Related
Jan 13, 2011
I don't want to have the original files on both laptop and desktop.
I want to make a copy of a Lightroom 3 catalog to put on my laptop so while on the move I can be geo-tagging and keywording to 8000 photographs. I don't want to drag an external drive with me. I just want to be able to work on the catalog metadata and have all the updates/changes stored there (on the laptop)(in the catalog) and then transfer the catalog back to the desktop (to the primary archive) and have all the updates/changes pushed back into the DNG's or the XMP sidecar files alongside the CR2's. These changes would be only keywording and possibly writing GPS data into them….NOT image edits (that would probally require access to the original image files)
As a test, I tried "exporting as catalog", TWO images (with the source images "unavailable"). I flash-drived the resulting catalog to my laptop. I opened the catalog in LR3 and made changes to the metadata. I tried both "saving metadata to file" and "updating DNG previews" (which would be useless anyway since I could not write data back to the missing originals) and also tried doing nothing and just closing LR, then pulling the flashdrive and plugging it into the DESKTOP.(knowing the changes are stored within the catalog itself only) I open the 2 picture catalog in LR and see the keyword updates. Hurrah!
I switch over to the master catalog. All I want to do is import the updated metadata (keywording, contrast, etc…) back into the master catalog and push the data into the original DNG or XMP. On import I select "replace: Metadata and develop settings only" (with or without "preserve old settings" checked) and click import. Voila! NOTHING HAPPENS and the updated keywords are NOT picked up.
I know that the metadata updates were carried out because they showed up when I opened it separately in LR! For some reason they don't seem to making through the import process to the master catalog…
View 2 Replies
View Related
Jan 15, 2014
I will be managing a small portion of a client's overall image workflow by updating their web prescence on a regular basis with new work and retagging/uploading old work. I believe this requires the catalog and the image library to be housed on an external hard drive that can travel between the two of us. We are both working on PC's with LR 5.3.
The workflow would look something like this:
Client downloads new images onto external hard drive and imports into LR "ClientCatalog" is created Flags Picks and Creates a Collection from those Picks.Hard drive is handed off to me where I open "ClientCatalog".Make suggested edits to images add detailed tags and metadata upload to various social media sites and websites return hard drive to client
Is there potential problem with this workflow? My assumption is that if everything is housed on the external hard drive then there are no worries about the catalog containing all the latest updates. Are there any "safety protocols" you would add in to this workflow (besides mirroring everythign on another hard drive)?
View 5 Replies
View Related
Dec 15, 2012
I'm using Lightroom 1. I tried to merge catalogs by importing a catalog into a master catalog, but there were some problems. The one I noticed immediately was that the collections are not correct. It imported the collections, but for example one collection now has only 4 photos when the originbal had 140? How can I fix that? (Although not necessariy a problem, it seems to have the wrong number of photos imported too. It says the previous import was 3175 photos when it was more like 10,000.)
View 2 Replies
View Related
Apr 29, 2013
I had to reinstall an OS in my computer due to a virus. As a result LR 3 in no longer installed. I still have the catalog on a backup disk and have just installed and updated to LR 4.4. What is the best way to merge the V3 catalog with V4 and are there any things I should expect or look out for?
View 2 Replies
View Related
Jul 3, 2010
How do you turn off the 'image is offline or missing' dialog when no drives are hooked with the source files. I'm on LR3, and I don't remember this being an issue with LR2. Doing a client presentation with my MBP and the files are indeed offline. I usually my client selection process from the grid and loupe views, but I'm getting this message, pretty large across the top of the image. I don't remember this being an issue before, so either it wasn't there at all, or the text was smaller.
View 23 Replies
View Related
Jun 29, 2013
Recently had my motherboard replaced under warranty and had to reinstall all programs. Had previously synched all my image files (and LR catalog files) to a separate hard drive using MemeoSync.
When I reinstalled and opened LR4.4 I found that the only folder showing was the synched drive (I:) whereas it should have been the C: drive. All synched images on the I: drive were correctly tagged but the original images on the C: drive had no keywords. I understand I can move all the files from the I: drive to the C: drive but there is another mystery I cannot solve.
I take all photos as RAW & jpeg. The files on the I: drive show the RAW files and the separate (but related) jpeg files. On the C: drive they are shown as <filename>.CR2+JPEG and I can't seem to separate them. I have tried ticking the box 'Treat JPEG files next to RAW files as separate files" without success.
So my question is, if I move all 49,000 files from one drive to the other, will the moved files retain the keyword tags AND the separated RAW/JPEG files? Also, must I delete all files from the C: drive before I move the replicated files from the I: drive? If this is successful I will then want to remove the I: folder in LR and just have the C: folder showing.
View 3 Replies
View Related
Feb 10, 2008
I recently bought a new Dell XPS computer running Windows Vista that included Photoshop Elements 6.0. My pictures were on my old computer in Adobe Photoshop starter album edition 3.2. I tried directly moving files using windows explorer (Think hard drive not internet) to external hard drive then importing to new 6.0 version but pictures would require "reconnecting" upon disconnecting from external drive and never would reconnect after disconnecting. I then tried the "Burn to CD" option in starter edition 3.2. This way transferred data successfully without requiring "reconnecting" but did not transfer catalog data.In addition, there is no "move" option in 3.2 and the 6.0 version will not load on my old computer for some reason. How do I go about transferring both the picture data (~3gig) along with the catalog data (tags & key words)?
View 5 Replies
View Related
Apr 12, 2013
When I try to create new baluster in the family but it belongs to air terminal category. Is there any clashes? Any family category description. Such as what is the difference between Lighting fixture and Lighting device. In Autodesk library has few families which has same things with different category.
View 2 Replies
View Related
Jul 20, 2013
In sketches i can see the names of the dimensions, the parameters, but if i have a few extrusions, can i know which parameter governs the height of the extrusion only according to their content?
View 1 Replies
View Related
Nov 12, 2013
i have an 8 giga LR4 catalog (about 300000 images).just installed the new LR5 and tried openning the LR4 cat in LR 5.it said it needs to upgrade, but in the middle of the prosses i had this messege: "lightroom encountered problems when trying to update the format of the catalog file and cannot use this catalog in this version of LR"
i saw that there is an option to export all my LR4 catalog as a new catalog and than import it into LR5.i haven't tried that yet since i'm worry that i might loose some info. will this process (of exporting and importing) keep all my LR settings? like develop user presets, keywords and collections?
View 6 Replies
View Related
