I have a student whose images are being edited on import. She does not have any import filters active (i.e. nothing in "Apply During Import") and the History panel reports only the import and date. But basic adjustments are being made to the images (e.g. Exposure, Contrast, etc.)
I cannot figure out how to disable this editing.
She is using Lightroom 5, a Nikon D3100 camera shooting RAW, and is importing directly into Lightroom from the card.
Why is photoshop 14 drawing colors differently than 13 and is there any way to stop it?I have a 256 step, three channel wedge, made without dither or aliasing, which draws perfectly (no bands or crossover) in CS6. This same file draws messed up in CC, with slight colors shifts and stepping. I have saved out the color settings from CS and loaded them in CC. The individual channels draw the same in both files when viewed singly.While my monitor calibration has only been perfect this way on gamma 1.8 images (this is what I have my NEC spectraview software set to), but it has been perfect, no steps, in both colormatch and gray gamma 1.8 from CS4 through CS6. Now, comparing CC to CS, on the same monitor, same file, same settings, the channels draw identically but the color composite is different.
The screen shot of the color composite file is shows 3/4 tone changes:
[URL]
The same file with a solar curve on it:
[URL]
Channels draw as before, and match up, witness the screen shot of the channels lined up with a solar curve:
[URL]
I realize that this probably doesn't look bad in the context of a webbrowser, however, usless I've made some gross mistake, the rendering has changed and I see no documentation on it.
How do I upload existing movies from DVD or youtube into the program for editing. When I follow the instructions it says "No valid content." Is it protected?
I have successfully installed Photshop Elements on a Mac but cannot import photos to edit them. I get this message "Photoshop Elements does not recognise this type of file".
If it´s possible to import vector graphic with fountain fills from AI (adobe illustrator) to CorelDraw x6 for further editing.
if i export from AI to eps or ai, and import to x6 the graphic with fountain fills becomes raster, if i export to pdf, the graphic is almost okay, but not as i wish to.
The usual import menue has the options for importing on the right hand side. My system is now showing an import dialouge box and the import dialouge on the right is greyed out. How do I get back to the standard import screen.
This issue occured shortly after update to 4.2, but not directly after. I am using windows 8.
The issue that occurs is after importing images they are adjusted automatically to develop module cross process 1. After dealing with this annoyance for a bit of time I realized that I can not even "RESET ALL" the images to delete the adjustment. In delving into other images that have been in my database for quite some time, I have tried to "RESET ALL", which resets images to CROSS PROCESS 1. I have never set import to automatically adjust.
I just upgraded from LR3.6 to 4.0. When trying to import images the import module freezes for a few minutes and then displays the import screen. However, when selecting a source the program freezes again and eventually crashes.
I had the same issue when upgrading to 3.6 some time ago and then found that disabling some USB controllers solved the problem. This works for LR4 as well. As I don't need all USB connections this is a workable solution, however, disabling controllers should not be necessary to run a program.
System is an Acer Aspire 7811 64 bits w/ Intel i7, Win 7 Home Premium, 8 GB internal mem and no external drives.
I'm using LR4 with a Canon camera setup (Wind 7 Ultimate). I've got the auto import setting all configured with an incoming folder and destination. The app recognizes when an image is put in incoming folder and in fact it moves it to the destination folder. What is really annoying is that it leaves me at the import settings dialog and then I have to make all these choices as I would if I were manually importing.
Shouldn't the images be places in the desination folder and some view of that image be displayed in LR? It could be the folder view or ideally I want to see the last image imported at 1:1 size so I can review it and see if I want to take another shot? Maybe there is some flag I've got set incorrectly.
I use Auto Import to import my RAW files. Each time LR imports my files the Previous Import count number increases. Is there a way to reset this count so it shows a true reflection of the photos from my previous import session?
Correct me if I'm wrong but if you manually import files the Previous Import count number resets itself automatically. I've Googled this problem & this question has been asked before - all users were utilising Auto Import.
I'm trying to import photos into LR3.3, and the thumbnails are grayed out, as is the import button. The photos come from two other cameras -- one Canon Elf, the other I'm not sure. I received them through dropbox, and they open fine with Bridge and Photoshop CS4.
I am trying to move a RAW file I have edited in Lightroom 4.3 over to CS5 for further editing. When I select the photos, then select "Edit in Photoshop" under the Photo menu, Lightroom tells me it can't open any of the photos I have selected. Am I doing something wrong?
When downloading a bunch of images, as I am now, I want to edit successive images as downloading continues, and move on to the next image when I'm ready. Instead, LR4 keeps switching to the image currently downloading.
If I import my raw images into my Lightroom 5 library and edit some of them in CS6 within Lightroom 5 by using the tab. How can I save them from CS6 back into my Lightroom 5 Library after making further adjustments?
We get the dialogue box on our laptop, but not on our tower. This is with LR4.3, using the Photo>Edit In path to open a RAW file in CS5. We have installed the Adobe Camera Raw 6.5. Both computers are running the same versions of each software, but I don't get the dialogue box on the tower which ask to Edit a Copy which preserves the changes made in LR4.
Im unable to export files for editing from LR 4 into photoshop elements 9. All my settings are the same as I had with LR 3 but nothing happens, PS doesn't launch or open.
Yesterday, I opened a catalog and edited a couple hundred images. I applied a preset at import, made a variety of changes, cropped, applied color labels, and the Pick flag. When I was done, last evening, I closed down Lightroom normally, as I do every day.
I did NOT write all my changes to the files on disk, which I normally do at the end of editing, but not ALWAYS...
This morning, I started Lightroom, opened the same catalog, and NONE of my changes from yesterday were preserved. Nothing crashed, nothing closed abnormally, NOTHING unusual happened before, during, or after yesterday's editing. I closed Lightroom and rebooted the system. Reopened, no difference.
I went to the catalog partition and looked in the previews folders. There are MANY previews/files that show changes from yesterday, but in Lightroom I have NONE of what was done... White balance is back to "as shot", ALL the basic, detail, and other changes in develop aren't present, no Pick flags, no color labels, no NOTHING... In the preview files, there are only 45 files changed with today's date (I haven't touched anything, yet), but there are 1104 files changed yesterday, so there are changes in there, but they're NOT showing up in Lightroom.
how I can get the changes to show in LR again?
I'm going to have to go back through and redo all the changes because I don't have time to wait, but is there some way to FORCE Lightroom to read the catalog and previews and put the changes back? Or some other way to recover the changes (I'm presuming the changes actually ARE in the previews)...
I've had PSE 9 for sometime now and PSE 7 prior to that.
I've recently downloaded Lightroom 4 as a 30 day trial. I've followed all the instructions re 'preferences settings' to allow further subsequent edits with PSE9 but I still cannot edit with PSE9 even though the option is there when i go to Photo>Edit Photo> Edit in Adobe Photoshop Elements.PSE9 doesn't even launch let alone not bring in the photo.So what have i tried so far to resolve?
1. Looking through all my application files on my Mac to ensure i've found the right file to link to. I've only managed to find 'Adobe Photoshop elements 9' - what i haven't been able to find is any file with the word 'editor' against it. So in essence i have 2 files 'elements organizer' and 'elements 9' which is my editor. I've linked to the latter but it's still not working.
2. I've tried dragging an amended DNG file onto the PSE9 editor icon. This then bring the photo into PSE's ACR editor - but without the lightroom amendments?
Lightroom 5 has crashed while I was editing an image, and produced a pop up menu advising Lightroom 64 bit has stopped working and the only option is to close the program. This has never happened before and occured today after I upgraded Flashplayer.
When editing an image or images in an external editor, such as CS5, OnOne, Nik, etc, LR5 places the images (when it works) at the end of the image sequence instead of where the origonal image came from and stacking the edited images with it. This is different than LR3 or LR4. LR5 does not seem to play well with Nik software either. After editing three images in Nik DHR Efex Pro 2 the saved image did not reapear in LR5. This was never a problem in LR4. Is there some 'tweeking' that needs to be done in LR5?
When I send photos to photoshop, they come back to Lightroom noticeably lighter even If I don't edit the picture in Photoshop. I'm using Lightroom 4.2, Photoshop CS6, images are RAW, and OS is Windows 8.
Sometimes when I want to edit a LR edited photo in PS, even when I open a copy with LR adjustments, some of those settings get lost when the PS file opens, especially brush adjustments.
I get this new iMac (OS 10.8.2) and I upgrade from LR3 to LR4.1. I had Photoshop Elements 10 loaded first before LR. The problem is when I am in LR4 and I want to edit a photo in the external editor. It opens PSE10 but no window and no photo. I was able to do this easily on a Windows machine matching LR3 and PSE10 and figured this would be just as easy. Not to fast apparently. What to do?
I just purchases LR3 and am shooting with Canon's T3i. When I import the RAW files (CR2), LR3 does not recognize the files and will not open them for editing. I am using LR3 on a Mac.
I am importing into iPhoto and then copying the RAW files into a folder designated only for LR3.I've downloaded the Adobe Camera Raw 6.6 update and the LR3 Mac 3.6 update.what I am doing incorrectly as Adobe states LR3 supports Canon's CR2 RAW files.
