Lightroom :: Republished Files Don't Change Names?
Dec 15, 2011
Using the publish feature, I published some files to a hard drive using a publish service. Some of the files I had renamed from the default camera name convention to my own name convention. Others I had not changed the name from the default. After working on the original files, I renamed the files that had not been renamed, and then I republished them. I was expecting the republished files to have their new name, but they did not - they had the old names. I've tried republishing several times. I deleted the republished version of the file and then republished and it still came back with the old file name.
What in blue blazes is going on here? How can I get the names of the published files to match the names of the files in Lightroom?
View 1 Replies
ADVERTISEMENT
Jul 5, 2010
1. How do I prevent it from downloading Flickr comments to Lightroom?
2. How do I remove images from the set to be republished? It keeps republishing images and deleting the text I've entered on Flickr. I want to decide if and when images are to be republished.
3. How do I remove images from the set to be deleted from Flickr? Trying to find a way to do #2, I checked "remove from collection" -- thinking it would remove the image from the to-be-republished set, and instead it put the image in the set to be deleted it from Flickr. I saw it sitting in that set and couldn't figure out how to prevent it.
In short, how do I manage the images that are pending for Flickr publishing?
Need better control AND better instructions on how to handle this functionality. It's nice to not have to publish to Flickr separately, but I'm about to give up on this -- the defaults are messing up my Flickr stream!
View 14 Replies
View Related
Sep 24, 2009
How can I batch change all my file names?
View 6 Replies
View Related
May 5, 2012
When editing some images in LR4 the sliders in Basic are:
Exposure
Recovery
Fill Light
Blacks
Brightness
Contrast
With other images the sliders are:
Exposure
Contrast
Highlights
Shadows
Whites
Blacks
how to I set the app to use the second set of sliders?
View 2 Replies
View Related
Feb 4, 2013
Example: New card, 100 photos taken, imported w/ name changes to LR catalog, all is well. Then, another 100 photos taken, and when import attempted, the prog "sees" 200 photos as new, not the actual 100 new photos on the card. Yes, the bottom is checked to avoid duplicates.
View 2 Replies
View Related
Dec 22, 2013
So I managed to have a fatal two disk crash and almost lost half of my catalogue. Luckily, I recovered one of the drives, but it renamed all of my files. I was using original file names (dumb mistake), and it seems there is no way to recover them. In the future I will be using YYYYMMDD-HHMMSS to keep things recoverable.
So at the moment I have recovered and renamed the files along those lines (YYYYMMDD-HHMMSS). What I want to do is rename the links in the catalogue to match as the files have that exif data, and then I think I can recover the files. Of course, Lightroom is throwing up roadblocks. I'd like to recover the photos with their edits, so is there a way to rename the files in the catalogue to match my new files?
View 1 Replies
View Related
Dec 18, 2011
I accidentally included a file rename when I just imported a batch of several hundred pictures. I violated a rule that I teach my own Lightroom students, and that is to look carefully at the import panel choices before proceeding.
How can I correct this so that the files are named as they originally were? I know how to easily fix the filenames in Windows (using a tool called BulkRename, for example), but then I'd have to "find" each image one-by-one and correctly point to the renamed version. I tried selecting all the images and then using F2 to rename, but none of the templates allow deleting a portion of the filename.
P.S. Here is an example of what I mean:
ON CARD:
IMG_0001.NEF
...
IMG_0300.NEF
WHAT I RENAMED TO ACCIDENTALLY:
IMG_0001 {shot by John Doe}.NEF
...
IMG_0300 {shot by John Doe}.NEF
View 10 Replies
View Related
Oct 31, 2013
I can no longer change the name of raw files when saving as JPEG. Software will convert to JPEG but only with the same file name. Previously saved files work fine.
View 1 Replies
View Related
Jun 10, 2009
i'm currently working on a new website with a friend, we are using Dropout to share the files, he's the coder, and i design. Im using a pc at the moment, and he's on a Mac, when i save my files, they are saved with capital letters, and to upload it in dreamweaver on a Mac they cant have capital letters. So my question is, is it possible to change the file name to .jpg instead of .JPG? And how do i do it?
View 2 Replies
View Related
Feb 4, 2013
I would like to learn is there any possibility to provide renaming the tag name of a created attribute, if there is a way, it could great to learn it from your side.
View 5 Replies
View Related
Apr 13, 2012
When I choose a DVD-menu the default chapter names are "chapter01" to chapter99" where 99 is the last chapter number. I do use the German language version. The it is "Kapitel01" to "Kapitel99".
I do not want to have the word "Kapitel" in each line of the menu. I only want to have the chapter number. "01" to "99". Not the short numbers which count from 1 again on each page of the menu.
Is it possible to change the text "Kapitel" to blank or to delet the text to get only the chapter numbers als default chapter names? Can I configure it manual in any configuration file. I think that the word "Kapitel" comes from a German language file? Can I change it to blank there?
View 2 Replies
View Related
Oct 9, 2013
Is this possible if i can change the column names, not a cell. For instance: Name of the column is "Full Description" to become something else? Or add a new column with my own description?
View 1 Replies
View Related
Feb 28, 2012
Starting brand new project. Would like to change the name of some shared parameters within my txt file. As far as I know you cant chnage the name once its established witin Revit (unless theres a third party app). Would there be any issue withi this? Utimately I am pushing these parameters into new geometry and I would like them to better conform to a standard for a particular customer. I rennamed JUST the parameter name and it seemed to work ok.
View 2 Replies
View Related
Aug 10, 2011
I am working on some office templates and I am unable to change some of the original attributes names. I have googled and read some articles on the autodesk site and have not figured it out as of yet. I am using autocad 2012. I have inserted a jpeg file for you to see. The names in the TAG row are what im trying to modify.
View 2 Replies
View Related
Mar 8, 2013
I just installed Photoshop Elements 11 for MAC and the option to change file names is grayed out. ( I am able to change the folder names.). In previous versions of PSE that I had on my PC I was always able to change the photo/file names to the shot dates. How can I accomplish this in PSE 11 for MAC?
View 5 Replies
View Related
Nov 28, 2011
I have a full set of water drawing that need to be submitted to the City’s Water Department. We have to include DWF and DWG drawings on a CDRom, but that is easy. The issue is that there is a stand-alone submittal set. Now, this is not hard to do with Sheet Set Manager; that is not the problem. The problem is that the Water Department has a special set of layers that they want any Civil to use for submittal. These layers are of course different from the NCS we are using now and in our CD submittal set.
Is there a better way than to insert or bind the drawings to a special set of drawings and then change the names? I would most likely use either the “rename” command or the “layer translator” function in Civil 3D 2012. However, if I ever had a revision that affects the base drawing and the CD set; I would have to re do all this binging/inserting and renaming over as well.
View 3 Replies
View Related
May 16, 2012
I have 500 autocad files and I wish to pull the border block name from each file, is there a way of doing this automatically
View 6 Replies
View Related
Nov 28, 2011
I'm in the process of creating 3D points (as an overlay) on some laser scanned data (using RiScan, it's just 3d dimensional data, with a northing, easting and RL) and unfortunately the only export option is to export to .dxf... Which is fine but when I export, the information has the point ID as the layer name.
I am aiming at getting this data into another program to analyse and it needs the point ID or name to be my annotation, as opposed to the layer.
So what I need is a way of converting the names of each individual points layer, to the point ID.
View 4 Replies
View Related
Aug 11, 2011
I'm finally wrapping up work on an iLogic Configurator project and have started to brainstorm the best workflow to get this "Smart Assembly" into the design group's hands. I had been anxiously awaiting the new "iLogic Design Copy" feature in IV2012, but just recently learned that users are unable to effectively rename any components with this command.
Is this really true? If we can add prefixes or suffixes, what's stopping us from changing the entire filename? We haven't upgraded to 2012 yet, but it seems like this may be a silly and unjustifiable restriction to a command that would otherwise save our designers hours of "file-management" (ie, manually renaming parts in Explorer, component replace in assy's, replace references in idw's, etc) each week.
Long story short, it seems that every workflow I've come across has had some sort of silly limitation that makes it undesireable for my application:
My top-level assembly contains all of the rules, and changes parameter values in the referenced skeletal parts. It also swaps standard parts for other standard parts as needed.I need access to rename ALL files (idw's, top-level assembly, subassemblies, and base components) while still maintaining/updating all internal hyperlinks between them.iLogic rules must be carried over to the new copied components (the existing "Copy Assembly" command strips the assembly of all rules). In light of the iLogic Design Copy's apparent shortcomings, any better workflow?
View 9 Replies
View Related
Jun 17, 2012
I need to change the value of some tags in a title block on multiple drawings. I tried using Lee Macs attribute changer [URL]. It works fine but not when tags have the same name.
I then looked at this code - [URL]
Idea was to change the tag names then use Lee Macs program. It too fails when there are duplicate tag names. It changes all tags not just the one I want.
In the the title block I have 3 tags with the name "NAME" but only one will have the value I'm looking to change. If I could place an IF statement some where in the above codes (or another code altogether) to instruct that IF the tag name is "NAME" with value "Dennis (BSL)" then change either the tag name or the value to "Daniel"
Im pretty bad at this programming stuff but with so many drawings I need a easier, automated way of doing this.
View 1 Replies
View Related
Nov 2, 2011
I have 2000+ drawings that have either the layer state "LMAN_DWF" or "DWF". I want all of them to read "DWF" for scripting purposes. LSIP routine that will go into a drawing and change rename a layerstate if it is named incorreclty, but do nothing if it is named correctly?
Does Layer State "DWF" exist?
If Yes, skip file and move on to next file
If No, does Layer State "LMAN_DWF" exist?
if Yes Rename Layer State to "DWF"
If No, skip file and move to next file.
Or a LSIP routine that can simply dump a list of all drawings in a directory that contain "LMAN_DWF" as a layer state. I could then use that list to do a simple script to change the layer state names on those specific files.
View 2 Replies
View Related
Dec 2, 2012
When the import "Preferences" changed.When I import DNGs, it COPIES them to another HDD and I cannot find out how to stop this.When I go to Preferences I do not see any way to change this. I am about ready to uninstall and reinstall.
View 3 Replies
View Related
Mar 18, 2013
Curious to know why and what is causing the metadata in files to change outside on lightroom. I will save a selected bunch of files and then moments later the end up with the metadata status of being changed outside of lightroom. They are not being opened in photoshop nor bridge. What would be causing them to be changed outside of lightroom and have the metadata status switch to "Changed on Disk"
View 2 Replies
View Related
Nov 12, 2011
have edited all my wedding photos in Lightroom 3. how to change my NEF files to JPEG.
View 3 Replies
View Related
May 28, 2013
I have tried the Links dropdown and the Document info dropdown but no files appear at all.
I have three linked/embedded files.
Need to finding out the names of the files..
View 4 Replies
View Related
Mar 29, 2013
When I went into LR4 just now I must have hit a button and all of my 700+ edited images from a specific collection started changing back to their original state. What did I push? How do I get them back without having to do it one by one in the history mode?
View 1 Replies
View Related
Jul 12, 2013
How can I tell LR to import to a new destination drive? I found a similar question for LR 3 a couple of years ago, which says in the import dialog box, choose destination. That doesn't seem to be there now. In any case, I want LR to import to the new destination all the time, not just as a one-off. My HD is full and I can't keep moving files manually.
View 2 Replies
View Related
Aug 18, 2013
Today I started up my computer,ran 3ds Max 2010 64bit on windows 7,the 3ds Max menus became square frames,included recently opened files names...I repaired and reinstalled 3ds Max,but it fixed nothing...what else can i do?
View 1 Replies
View Related
Mar 17, 2014
Lightroom v5.3: I'm a long time DNG file user for Pentax and Nikon cameras. I recently discovered that about 300 of my RAW Nikon files already imported into the Library are NEF files instead of DNG files as my other 5700 files are.
I know that I made an error somewhere along the way, but- Is there an easy solution to converting those existing NEF files to the DNG format?
View 2 Replies
View Related
Mar 24, 2014
can you export layers with the layer names to separate jpeg files?
I have a photoshop psd file with many layers that I want to export to separate files with the new name of the files being the same as their layer name. I have the following programs:
Using Photoshop CS4?
Using Photoshop Elements 7?
Using Photoshop Elements 12 (Trial)
View 1 Replies
View Related
Apr 2, 2013
By accident I changed all my photos names. All my 30.000 pictures have the same name now.( with different numbers at the end.) How can I fixe this. I have an old back up catalog with the right names. Or is my only option to copy my back up from my external hard drive to my computer and synchronise it in lightroom..
View 2 Replies
View Related
