In the Print Adjustment panel of the Print module, what do the numbers, which go from -100 to +100 really mean?Exposure slider in the Develop Module, which are, I believe, fractions of an f/stop?
View 7 RepliesI cannot figure out how to get lightroom to print page numbers when printing a catalog, It places the page numbers at the very edge of the page, and my printer needs a .25" margin (it won't print to the edge of the paper).
how I can get page numbers to print?
Also, It is taking forever to print my 77 page catalog of 1524 photos--does everyone have this trouble? (an hour so far and not even half done "preparing"--this is a small library for me, only 12 gigs... many of my libraries are 500 gigs)
How can i adjust the area I want to print? I mean the dashed line. What i need to do is print out a map and i want it to cover the entire paper, without any bords around it.
View 5 Replies View RelatedI have subroutine that retrieves a list of detail numbers in a drawing. Sometimes there are missing numbers. I am looking to find a list of any missing numbers.
Example -
(setq List_DN (list 1 2 3 5 6 7 10 11 12 17))
Missing numbers are - 4,8,9,13,14,15,16
I would like a subroutine to take the List_DN are return the following missing numbers as text
(Get_Missing List_DN)
return
4,8-9,13-16
I am trying to link my parts list to a drawing however all balloons have different numbers.
I open the assembly and check everything out from vault I open my bom and change item numbers. When I get back to my drawing and apply for auto balloon I get completely different item numbers in my balloons. We just updated our software to a new 2012 version so it's maybe something with set up.
Is there a way to sync callout numbers to correspond with note numbers. When I add or delete notes in my drawings it takes to much time to update the callout number in the drawings. I need to figure out a way for the note and corresponding callout to change at the same time.
View 6 Replies View RelatedIn LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedI hereby have a school note report from my little brother. He told me he had some bad notes in his last period and I would like to make a fake copy of it.
Basically, I scanned his 3th period notes and I would like to change some and add some
How you can remove numbers and add new ones over it and add numbers with the same digital code used on the old ones to put those in empty notes
I need to plot a drawing with a few plans, which are in 2D but also a 3D model of the intire installation and a few side views, which are side views of the 3D model.When I plot the drawing I am able to get the side views in black and white by taking the following steps:(i got these steps from this post: URL....
- set the visual style (in model space) to hidden or wireframe.
- in the layout you select a viewport that conntains a 3D visualisation and double click in that window to set the visual style to 2D wireframe and also set the viewports shade plot to hidden.
because the plotter is black and white only I see those side views in different shades of grey but the problem is that the difference in grey isn't clear enough (and yellow pipes are hardly visible) and I can't adjust these. When adjusting the .ctb it only affects the 2D views and not the 3D views.
It is possible to change the greyness by changing the color of the diffent pipes that are in the drawing but this is not a desired option by the client.how to alter the shades of grey in 3D visualisations so that not all pipelines look the same .I attached a file of what the plot preview looks like and another of what the actual plot looks like
For some reason when I try to upload my photos it is coming up with an error that states "only letters and numbers are allowed" "Please remove all illegal characters" then it will say "1 of how many" I went into the preferences and changed all of that info under the file information. I am making sure there are no illegal characters there. I am using Lightroom 3.
View 4 Replies View RelatedI purchased LR5 and found out it can't read my Photoshop psd files. So as it stands I have about 10,000 psd files that LR can't read. Is there a easy way to batch convert so LR can read. Or just trash LR and stick with CS6.
View 23 Replies View RelatedI have designed and printed a BLURB book in LR4 beta successfully. Although the color was somewhat streaked and blotchy, it wasn't a bad effort, but it does need refinements. How I might add page numbers? Without page numbering, making a book greater than a few pages is not really acceptable.
View 2 Replies View RelatedI am playing with the book module and I love it. Hwever, I wonder whether there is a possibility to automatically create captions that show the date of the creation of a picture. More generally any subset of the Exif data would be welcome. This is possible for slideshows, but I could not figure out how to do this with book pages.
Is there a way to automatically insert page numbers?
I want to rename images imported from a card into Lightroom 4.4 with a single set of initials followed by a sequence of unique numbers. I would like the number sequence to continue from one import to the next. However, each time I start a new import, Lightroom starts again at 00001. Is there a way to instruct Lightroom to automatically continue the renumbering sequence from one import to the next WITHOUT manually resetting the "start" number each time?
View 1 Replies View RelatedI am using LR 5.3 for real estate photography using bracketing of sets of 3. Then creating stacks by capture time in LR. I would like to know if I can apply a preset to ALL of a specific number of a stack (such as all #1's, all # 2's or all #3's - when expanded of course) at one time rather than manually selecting all number 1's and then adding a preset; etc?
View 1 Replies View RelatedEvery since upgrading to Mavericks my Lightroom metadata browser has had missing numbers. It used to show the total count of photos that matched the criteria and it no longer does that.
View 2 Replies View RelatedI've noticed that LR interprets the white balance settings differently for my raw .nef files coming from my Nikon D3s and D4 bodies; even when a specific kelvin temp is chosen in camera.
Here's a few examples:
D4 flash WB, LR shows as 6150, +2
D3s flash WB, LR shows as 6400, +9
D4 WB set to 5k, LR reads as 4750, +1
D3s WB set to 5k, LR reads as 4900, +10
why this is happening, and what (if anything) I should do to get xxxx kelvin temp in camera to import as xxxx kelvin temp in LR?
Just noticed that all of my folder titles are grayed and not white and the photo quantity numbers don't show.....everything is still in place, what gives? I am new to lightroom and starting to panic!
View 4 Replies View RelatedAccording to the keyword list panel, I have one photo assigned two words as keyword, but I don't have such a photo in my catalog. How can correct the numbers appearing near keywords in the keyword list panel?
View 2 Replies View RelatedI would like to be able to export large numbers of images at a time with the same size, compression, etc. and be able to save these export settings so I can use them again. Does LR have this ability? What is it called?
View 1 Replies View RelatedI have a large job for a client who uses antique computers. They are so old that he can't run Lightroom. As a workaround, I posted the images I wanted him to look at on SmugMug and we had a disaster. Their sequencing on screen does not match my "as shot" sorting on my Lightroom (4). Is there a way I can print sequential serial numbers/ids on my images before I upload them to SmugMug so we are always talking about the same image?
View 6 Replies View RelatedI'm being asked to provide images in 800X600 72dpi. Is there a way to adjust dpi when exporting?
View 1 Replies View Relatedmy product code is too short. I can't install Photoshop Lightroom 4.
View 5 Replies View RelatedIn Photoshop, you can set the size of the eyedropper to sample a single pixel, 3x3 average of 9 pixels, 5x5, 11x11, etc. It can make a big difference when sampling a single pixel as opposed to the average of a larger area.
Can the sample size be set in LightRoom?
If not, what is the sample size in LR when you run your cursor over the image? Does this vary depending on the displayed magnification of the image?
In development mode, any adjustments I make on the sliders on the right have no effect to the picture. Sometimes the picture greys out and I have to try and click on a different picture below for it to show up again. The grey screen comes up if I try and crop and image as well. It feels like it's not letting me make any adjustment to the layer.
It was working fine a month ago. Had a client ask for a picture so started up LR4 and experienced the above problem.I have tried the following.
1. Created new catalogue, import new images. Still can't edit the pictures. Moving the sliders around and has no effect to the picture.
2. Unistalled LR4 and Reinstalled LR4 but still no change.
I've been reading online that lightroom has the ability to control sliders in the develop module by simply hovering over the slider and scrolling. However this doesn't appear to be working for me. Whenever I hover over a slider and scroll, Lightroom attempts to scroll the right panel.
My system configuration:
Mac
OSx mountain lion
Lightroom 4 (latest update)
tried for raw and JPG files
tried using the macbook pro 2 finger scroll, a microsoft USB mouse and a MacAlley USB mouse
is there anything special I need to do to make this work?
Is it possible to adjust the Capture Time by 5:30 or 5:45 hours? These are the Indian and Nepalese timezones. The Edit Capture TimeShift by set number of hours (time zone adjust) only allows adjusting by full hours and not fractions of hours.
It will be great to have this added to the newer versions of Lightroom as 5:30 and 5:45 are, together with other more exotic combinations, valid time zones.
I wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
All was working OK and the printer is showing ink cartridges almost full In the Library Module the print review is fine.
Switch to Print Module and the print review is now blank (100% white)
Pictures no longer print
Windows 7
Espon Artisan 835 printer
LR5.3
I have just bought and installed Lightroom 5 and need to set my print size to A3 and in the future even bigger. I do not have the facility at home and need to have them sized correctly for the print shop so they do not have to waste time resizing them. I am at a loss how to do this. I cant find any settings for this size print. A3 is roughly 42 x 29.7 cm.
View 2 Replies View RelatedI cannot seem to reset the print template screen while in the " Print " module. It has adopted the smallest pic size with three times the normal border. I wish to reset to full screen in print module
View 1 Replies View Related