Lightroom :: How To Make Import Settings Stick
Aug 3, 2012I have a user preset I apply to import and its not very sticky, meaning it will work a few times but others it will not.
View 2 Replies
ADVERTISEMENT
Lightroom :: Export Settings Fail To Stick?
Jan 18, 2014I have attempted to upload to Behance using the LR5 Behance plugin with the following settings:
1. Format: JPEG
2. Color Space: sRGB
3. Limit File Size to 4000k (Behance limits to 50 mg)
4. Resize to Fit: 31.0 megapixels (Behance limits is 32 mpx)
5. Resolution: 72
On each attempt to upload, Behance informs me that I have exceeded the megapixels size of 32 mpx
I have attempted the same saving instead to my desktop. When I attempt to upload from the desktop to Behance, I receive the same error message.
AutoCAD Map 3D :: Can't Get Settings To Stick
Aug 29, 2011Just upgraded to Map 2012, and want to use the map classic workspace. I spend time setting up all the various toolbars where I want them, and then, when I exit and come back in, either the toolbars are no longer there and I have to insert them again, or it has switched me back to the default worspace.
View 2 Replies View RelatedPhotoshop :: CS6 / Epson Page Settings Do Not Stick
May 24, 2012I am using Photoshop Extended CS6 on a Mac with OS 10.7.4 and the latest driver for an Epson 7800 just downloaded from the Epson site. In the Print Settings dialogue "Page Setup" defaults to "Roll Paper - Banner" and any other selection such as sheet does not stick when saving a printing preset. Once selected, it appears to stay for one print, but returns to roll paper so that it needs to be reset with every print.
View 6 Replies View RelatedLightroom :: After Import Images Adjust To Cross Process 1 Not Set In Import Settings
Nov 4, 2012This issue occured shortly after update to 4.2, but not directly after. I am using windows 8.
The issue that occurs is after importing images they are adjusted automatically to develop module cross process 1. After dealing with this annoyance for a bit of time I realized that I can not even "RESET ALL" the images to delete the adjustment. In delving into other images that have been in my database for quite some time, I have tried to "RESET ALL", which resets images to CROSS PROCESS 1. I have never set import to automatically adjust.
Lightroom :: Should It Import Settings From Disk Or Overwrite Disk Settings From The Catalog
Mar 31, 2011When the 'up' arrow appears in a thumbnail and comes up with the message:
The metadata for one or more of these photos has been changed by another application. Should Lightroom import settings from disk or overwrite disk settings with those from the catalog?
What exactly does that mean? This seems to happen every time I export an image to PS (CS5) and return to LR. What exactly has changed? What settings are being imported if I choose 'import settings from disk'.
Illustrator :: How To Make 2 Points In Two Different Objects To Stick To Each Other
Apr 16, 2013As the topic says, I need to make 2 points in two different objects to stick to eachother, so for example when I rotate a line which is "connected" to a square object in one end, the line will rotate around that point.
Also, if I have lets say two square objects and I "connect" one of the corners of one square object to another corner of another square object, where the points are located exactly on the same location, I need to be able to rotate any of the square objects around the point which is connected to the other square.
Lightroom :: Import Development Settings From Another Computer?
Oct 1, 2012At home I still have the trial version (I wait for 4.2 to see if it will be much faster before buying it) and today I do some photo development at work (we also have 4.1 version).
What I'd like to know is it it's possible to import the processings settings of each photos to my own catalog ????
Here is how I did my work:
At home my raws are on an external USB drive and I import my pictures from this disk: path is I:Mes photos<subject + date of the photoshoot> My Lightroom catalog is in it's default path (user profile, my pictures).
At work, I put my photos on a temp director c:MyRawPictures and import them into lightroom.
Now how can I export the development settings from the lightroom at work and import them in my home setup ?
I saw a menu "import from another catalog". can I use this one ? If yes, do I need to copy the "Lightroom catalog" folder ?
Lightroom :: Unexpected Basic Settings Set At Import?
Mar 21, 2013I just started using LR4.3. After importing about 1000 photos and establishing my collections of chosen images, I noticed that every image had the same settings already in the Basic panel. These are temp:5500, tint:4, exposure .28, contrast: 24 and Vibrance: 6. All other settings are 0 or some other LR default. I do not recall telling LR to do this on import, and in fact, don't know how to do that. Am I forgetting that I did that? Also, I set preferences to use the default specific to my camera serial number. MIght LR be making these settings based on that selection?
View 6 Replies View RelatedPhotoshop :: Make Text Stick To A Path While Reshape It?
Jul 25, 2012If I type text along the edge of a circle, how do I make the text "stick" to the circle and move with it when I resize that circle? The same would go for any shape.
View 8 Replies View RelatedLightroom :: Import Tags From Another Catalogue Without Develop Settings
Oct 16, 2012How do I import tags from another catalogue but not the develop settings of each image?
Here's whats going on:
I started with 5000 images on a hard drive. I gave a copy to someone else working on the project.
I physically moved images into real folders and edited all the shots.
She left all the images where they originally were and tagged each image.
I want to combine her tags with the edits that I've done, with the images in their new locations I've made.
I have a copy of her catalogue file.
I tried importing her catalogue into mine- which will pull her metadata tags, but only also with pulling her develop settings which resets all my work.
How can I import ONLY her metadata tags?
I can't open her catalogue and write the tags into XML sidecars because I've moved the images from where her catalogue says they are.
I realize we should have done this differently from the beginning, but with that being said- if I could import only her metadata tags then that should work. But Lightroom 4 only gives the options of importing BOTH metadata and develop settings.
Lightroom :: Import (or Create) Default Settings From A Existing Document?
Feb 15, 2014Can I import (or create) default Lightroom settings from an existing document and save them? Make them a personal default set opening with all future LR catalogs?
View 2 Replies View RelatedPhotoshop :: Can't Make Transparent With Magic Erase-stick Like Did With Gold And Bronze?
Oct 13, 2013I make some medals for my game site. And now I've got a problem with my silver medal. I cant make it transparant with the magic erasestick like I did with gold and bronze.
View 1 Replies View RelatedLightroom :: Metadata - Import Settings From Disc - Colour Code Disappears?
Oct 12, 2013I'm going to try this again. Using PS CC for photographers, that is Photoshop CC and Lightroom 5.x, new iMac running Mavericks.
Having processed an image in LR and PS, and saved as TIFF back to LR. All is well.
If and when I subsequently take the TIFF back into PS for further tweaks and again save as TIFF back to LR, replacing the original TIFF, I then get the Metadata Conflict warning, the exclamation mark.
As far as metadata goes, I don't want to lose what I did in LR....that is, keywords, color codes, captions, gps data, etc. I do want to retain the additional adjustments I made in PS.
I've noticed that when I choose to 'import settings from disc' that the color code disappears and I have to re-do it.
If I select the 'overwrite with LR settings' option, my concern is that I lose those PS adjustments.
My questions is: WHAT settings could have been changed in my round trip to PS that trigger the warning?
Lightroom :: How To Get Custom Default Settings To Enable Lens Profile Corrections Automatically On Import
Jan 20, 2012I have created default settings by serial number for my Canon Mark III 1ds which include enabled lens profile corrections. I then created a user preset with these default corrections. Next I imported a folder of RAW images shot with this same Canon camera with the user profile checked as part of the import. When I switch to the Develop module and check the Lens Corrections panel, I see that although it is checked for each file, the actual make, model and profile are not populated.
Is this a bug or am I overlooking something on import? I understand that in LR 4, you can apply specific lens and camera calibration profiles to camera serial numbers (noise reduction etc too).
MacPro 2.8 Ghz Quad-Core Intel Xeon with 16 gigs of ram running OSX 10.7.2.
Lightroom :: Crop Doesn't Stick To Its Ratio
Apr 22, 2013I normally crop to ratio 4:3 (8x6) for printing,but just very recently the crop does not stick to it's ratio when reaching the outer borders.(especially if changing orientation from Landscape to portrait).If pulled It just keeps expanding to almost a square ratio before it stops.Obviously the padlock is locked and it is something that never used to happen.
View 37 Replies View RelatedLightroom :: Sharpening Does Not Want To Stick In Library Or Exporting?
Mar 17, 2014In Lightroom, when editing the pictures, in the Developing Module, I will adjust the colors and sharpening and then I used the brush to add more sharpening to a face or an object. When going to the Library Module to inspect the pictures the sharpening is not there. Even when I export the pictures the sharpening goes away.
So I went to people who teach lightroom and they were stumped. and showed them when toggling back in Library and Developing modules and they would see a sharpen image in the developing module and then a non-sharpen image in the library and export picture.
I have asked this question here before and everyone was nice to explain to me their theories, but many believe it's my exporting, but it has nothing to do with my exporting, other than that it takes like an hour and plus minutes to export about a 120 pictures, which I know it is not correct, but that does not bother me more so the sharpening.
P.S. Do you think I should just purchase Lightroom 5. I am using Lightroom 4.4, which I got literally last year.
Lightroom :: Folder Does Not Stick In Export Presets?
Aug 19, 2013I am using a Sony Alpha 99V camera, but it is not detected on Lightroom 5, however, it appears in the compatible cameras list.
View 3 Replies View RelatedLightroom :: Folder Does Not Stick In Export Presets
Nov 24, 2011When I create an export preset and then return later to use it, the folder for saving it to has changed (to whatever I used last. Because I use the presets to re-size images for my 40 odd web sites, this is really inconvenient. Can this behaviour be changed so that the preset remembers the selected folder? And if not could it be considered as an option for the next update?
View 2 Replies View RelatedLightroom :: How To Make Import Photos From Only One Of Cards
Oct 10, 2013So my D800 has dual card slots. The photos taken are stored on the SD then backed up on the CF.
When I go to import in lightroom, LR imports photos from both the SD and CF so I get duplicates ("Don't Import Duplicates" is irrelevant here, this applies only to photos already on the computer).How do I make LR import from just one card?
Lightroom :: How To Prevent Auto Start When Inserting Flash Stick Or CD
Apr 12, 2012How to prevent Lightroom auto-start when inserting flash stick or CD?
View 1 Replies View RelatedLightroom :: No Longer Able To Export Photos Either To Desktop Or To Portable Stick
Jan 27, 2014I seem to have a bug in my Lightroom 5.3 program in that I am no longer able to export photos either to my desktop or to a portable stick. I'm now getting the following message each time I try to export any photos.Unable to Export. An internal error has occurred. WIN32 API error 2 (" The system cannot find the file specified").
View 1 Replies View RelatedLightroom :: How To Make Photomatix TIFF Show In Previous Import Photos
Apr 25, 2012Just started using Photomatix pro. Used autoimport to reimport into LR 3. Can only see Photomatix tiffs when switch to all photographs. This pulls up all 8000 plus photos rather than just the file folder in which I am working. Is there a way to get these tiffs to show in previous import photos?
View 1 Replies View RelatedLightroom :: Does LR4 Initially Preview At Specific Settings / Change To Individual Image Settings
May 2, 2012I’m a long time Photoshop user but recently picked up LR4 to try to fine tune my workflow. I’ve noticed that after importing new files (RAW, I haven’t tried with jpg) into my library as I scroll through them (1-up, not in grid) the preview comes up and then after a second or so the WB changes to a much colder image.
Does LR4 initially preview at specific settings and then change to the individual image settings? Even if so, the final images seem very cool and I feel like I have to up the temp more than I should have to. My previous workflow was to sort in Bridge and then use ACR to import to Photoshop. I feel like I did much less tweaking of my WB this way. I feel like I’m starting from square one with LR4.
3ds Max :: Import Settings For STP?
Aug 31, 2012When importing STEP data, all the body objects a imported as medium quality. You can set it manually to corase or fine. Is there a way to do this during import? I have hundreds of body objects which need to be in coarse. Is there a way to do it with a script, or is there an import option i have missed?
View 2 Replies View Related3ds Max :: Import JT Model Settings
Jun 28, 2013I am having a problem importing a JT model I have. The model comes in however it loses all of it's smoothing groups when it's imported and alot of the vertices are not welded. The importer doesn't have any settings for keeping smoothing properties, and it also doesn't have an option for Welding verts. The verts all right on top of eachother.In the DirectConnect text that I get after importing my object I have the following settings.
JT import options:
wantAllLODs true
wantMeshes 2
wantBreps true
wantCurves true
wantCoordinateSystems false
wantProperties false
wantExplodeAssembly false
wantDeleteDegenAssem false
wantMergeVertices false
I can change the top settings, at import, where they are set to true, but is there a way to keep the face smoothing groups and make sure verts are welded?
Photoshop :: DICOM Import Settings?
Jun 19, 2012I'm working with DICOM images and want to use the "open as volume" option that photoshop gives when you open DICOMs and import to PS. However, it does not give me this option when i open up files. What is the problem here?
View 1 Replies View RelatedPhotoshop :: How To Import Gradient Map Settings From One Computer To Another
Jan 8, 2013Quick question How do I import my gradient map settings from CS3 on my old I mac into my new Mac that uses CS6? Is there a folder somewhere that I can just copy and paste?
View 2 Replies View RelatedCorelDRAW Graphics Suite X6 :: Import X5 Settings?
Apr 11, 2012This may be a silly question but I cannot find where to import all my custom keyboard shortcuts from X5. Is this doable?
View 3 Replies View RelatedAutoCAD 2010 :: How To Import Named UCS Settings
Aug 22, 2012I have many named UCS settings in the base file but have to apply this setting to at least 30 files... It would be nightmare if I have to do this all one by one.
View 1 Replies View RelatedAutoCAD Civil 3D :: Map Import Default Settings
Mar 22, 2012I am using Map 3D 2010/Civil 3D2010/AutoCad 2010. Is there a way to change the default settings in the Map Import dialog box? I want to "Create Object Data" and "Import Polygons as Closed Polylines" with every shp file I import. It would be nice if I could have these parameters selected by default instead of having to check them both with every shp file I import. Is this possible?
View 1 Replies View Related