I just cannot get it. In the Library I can see the desktop, but not all the folders in desktop are not visible. Have tried many triks but cannot fiqure this out. The intro tutorial does not explain this at all in necessary details. Why doen´t the folder tree open like in windows? I am just used to work with the windows way to show the folder tree and that is why this looks a bit starange to me.
View 1 RepliesThere are times when I want to re-import an image but am not allowed to do so even when I un-check "do not allow duplicate imports"
View 8 Replies View RelatedI use mac OS 10.8.5, LR5.3 and PSCC.
I sent an image from LR5.3 to PSCC (via edit in PS) where I edited it and then saved it, under a new name, back to the same folder in the LR catalog. It does not seem to matter if I save as TIF or as PSD, I get the following message:
I can the choose SYNCHRONIZE FOLDER by R clicking the folder in lightroom and the image is promply displayed in the LR grid.
This is a recent problem. Don't know what I might have changed in preferences for either application.
I noted after importing my images from my disk f(to Lr5) that some floral images were missing.Luckily they were on my backup disk so i moved these floral images from my backup disk to the proper floral folder in my int. disk f. Now how do i import these new images that are located in their particular floral folder which are indeed there.Also how do you set up these new files to do a preview setup. did try to import these new images,but lightroom would not let me do it because it grayed out the images telling me that we noted some duplicate images here. Yes, i did see a few dups of these images in the floral file. If i deleted these dups under its proper folder in disk f shouldn't lr5 let me continue the import?
View 1 Replies View RelatedI've imported images into LR4 from my External HD and and a few the files are corrupted. I realize that LR is not suppose to do anything to the files on the disk when importing... but I've checked the RAW images from back-ups and they are not corrupted prior to import into LR. AFTER import into LR the actual file (on the external HD) IS corrupted in both LR and then on the External HD.
My workflow has been to copy files from my CF Card to the External HD (Western Digital 3 TB) ino the appropriate file then go to LR4 and import.I replaced the Card Reader..same problem occurs. I've checked numerous RAW files in Bridge none are shown as corrupted (prior to LR4 import)
I have a problem with gettng an image from Lightroom 4 into Photoshop Elements 11 for editing on an iMAC. I select "Edit In Photoshop Elements" and PSE pops up but the image does not. A TIFF image is created in LR4 but is nowhere to be found in PSE.
View 2 Replies View RelatedI'm operating on an iMac, OS 10.9, brand new, lots of RAM etc. I've confirmed with Apple that my computer and ext HDs are working fine. That said, using LR5.2 I'm unable to import, even a single image. I'vre tried rebooting LR, rebooting the external HD, rebooting the computer. Nothing works.
View 4 Replies View Relatedevery time I open it. A single message appears 'lightroom opening catalog: marsh-essex-country.jpg.ircat'. I had the last time I used the program tried to import a jpg image from my pictures. It failed the and now the program consistently crashes, in the faulting module msver100.dll
I have reinstalled Lightroom and it does no good.
I'm unable to import raw image files from 5DMKII after upgrading to LR 4.4. Using an iMac OS 10.6.8. No error message, importing just stops after a few files have been imported. First it imported 2 files, then 9, then 11, before it stalls. No error message or pinwheel icon. I tried re-installing 4.4 twice with no change. My laptop, a Macbook Pro same system, running LR 4.3 can successfully import the same files using the same card reader and cable.
View 1 Replies View RelatedIn lr4.1 before Importing images, I'd like to see more info (camera, lens, focal length, f-stop, exposure time etc.) about the images besides just the file name before making the selection to import.
In the library module I just push the i key and it loops through two sets of info and a non-display. Why can't I do this in the Import module? If yes: how? What options do I set and where? If no: Is there a plugin to do so or who do I ask to add this to the next release?
Slow rendering image previews in import dialogue?
My LR 5 is as slow as a snail generating those previews.
Importing my RAWs form the EOS 6D (saved on a 95MB/s 32 BG SanDisk Extreme Pro) it renders only the 12 or 24 displayed previews and leaves out the rest (the next only when I'm scrolling down). For 12 images LR5 needs 8-10 seconds. LR4.4 does the same process for all 150 RAWs in 1-2 seconds.
It doesn't matter if I want to import to my workstation (Dell Precision T1650, 8core Intel Xeon E3-1240 V2, 16GB RAM, 64bit) via USB 3.0 (Reader & Port) or to my laptop (Dell Latitude E6400). So it must be LR, not my hardware.
Are there known issues with the Canon-RAW format? I just updated EOS firmware to 1.1.3, but the renderspeed stays the same. For 1 image 3-4 seconds single...
When importing images to the catalog, both the preview and import image is highly contrasted and saturated.When I use edit in the photo opens as the original image without updates. My import preswet options show none.I am using Windows7 32 bit.
View 6 Replies View RelatedThe usual import menue has the options for importing on the right hand side. My system is now showing an import dialouge box and the import dialouge on the right is greyed out. How do I get back to the standard import screen.
View 2 Replies View RelatedThis issue occured shortly after update to 4.2, but not directly after. I am using windows 8.
The issue that occurs is after importing images they are adjusted automatically to develop module cross process 1. After dealing with this annoyance for a bit of time I realized that I can not even "RESET ALL" the images to delete the adjustment. In delving into other images that have been in my database for quite some time, I have tried to "RESET ALL", which resets images to CROSS PROCESS 1. I have never set import to automatically adjust.
I just upgraded from LR3.6 to 4.0. When trying to import images the import module freezes for a few minutes and then displays the import screen. However, when selecting a source the program freezes again and eventually crashes.
I had the same issue when upgrading to 3.6 some time ago and then found that disabling some USB controllers solved the problem. This works for LR4 as well. As I don't need all USB connections this is a workable solution, however, disabling controllers should not be necessary to run a program.
System is an Acer Aspire 7811 64 bits w/ Intel i7, Win 7 Home Premium, 8 GB internal mem and no external drives.
I'm using LR4 with a Canon camera setup (Wind 7 Ultimate). I've got the auto import setting all configured with an incoming folder and destination. The app recognizes when an image is put in incoming folder and in fact it moves it to the destination folder. What is really annoying is that it leaves me at the import settings dialog and then I have to make all these choices as I would if I were manually importing.
Shouldn't the images be places in the desination folder and some view of that image be displayed in LR? It could be the folder view or ideally I want to see the last image imported at 1:1 size so I can review it and see if I want to take another shot? Maybe there is some flag I've got set incorrectly.
I use Auto Import to import my RAW files. Each time LR imports my files the Previous Import count number increases. Is there a way to reset this count so it shows a true reflection of the photos from my previous import session?
Correct me if I'm wrong but if you manually import files the Previous Import count number resets itself automatically. I've Googled this problem & this question has been asked before - all users were utilising Auto Import.
I'm trying to import photos into LR3.3, and the thumbnails are grayed out, as is the import button. The photos come from two other cameras -- one Canon Elf, the other I'm not sure. I received them through dropbox, and they open fine with Bridge and Photoshop CS4.
View 4 Replies View Relatedi am trying to use it to design button badges on my new laptop. I have photoshop on my old laptop and have lots of psd files that I have been trying to use with GIMP.
I am finding that GIMP is shrinking my images when I import them to different images and when I come to print them on A4 they are smaller than they should be, and so useless to me in making my badges...
Printing the original image from GIMP gives me it in it's intended size though. How can I stop this from happening?
It happend when I import into an A4 - as I need to fit approximately 40 badge images per sheet.
How do I import an image INTO Gimp? I realize I apparently can't scan into it, but how do I get my images to open IN it?
View 1 Replies View RelatedI have 2 images.
I need to put them both in the same photoshop image.
I have several animated gifs that I would like to edit (basically add another frame) to. Am I able to do this? I can't seem to find a place on the toolbar where it would allow me to bring in an image (gif) from outside the project. I've even tried to drag it in from the desktop but ImageReady won't allow it in...
View 1 Replies View RelatedHow do you import a jpg image into a layer in Photoshop ? I am trying to build a website template in Photoshop and want to import images into various layers to move around. In Fireworks it's as easy as INSERT>IMAGE.
View 4 Replies View RelatedI have created a webpage using Xara Designer Pro 6 and am trying to import my rotating GIF image. (I have created this image using Xara 3D). When I import this image everything else on the page dissapears. How can I import this correctly?
View 7 Replies View RelatedI'm new to Autodesk Inventor. I found a .obj 3D image that I'd like to import into Autodesk Inventor 2014 Professional. I found FBX 2013.2 on the Autodesk website but was unsure whether or not I should install it. Is it compatible with the suite I have?
If it isn't compatible, is there a program/utility that I could use?
This is a huge problem for me, and it's getting incredibly annoying.
This issue is when I import an image (drag and drop, or other ways as well) into Photoshop and the image appears in a really small size. I need to be extremely percise in all of my projects by the pixel, I can't have it going a single pixel larger or smaller. But when I drag it in, it shows up much smaller and I have to drag the boundries to make it larger. I basically just want to drag a 64x96 image in, and have it actually show up as 64x96, not incredibly smaller.
I don't know the size of a portion on the canvas, because I can't just guess, so it's impossible to actually stretch it to its original size and actually be accurate.
If your scanner manufacturer does not support scanning in 64-bit mode, or you have issues scanning with TWAIN, you can scan into Photoshop CS6 using Apple’s ImageKit technology, which is built into Photoshop CS6, does not need a plug-in to be installed, and provides access to a large number of scanners.
That doesn't work with my Epson Perfection V350 Photo. I wonder if it actually works with any scanner. With Photoshop CS6 have wiped out many scanners that don't have 64-bit compliant drivers, why doesn't Adobe connect with Apple's Image Capture app? Why doesn't the V350 work with the ImageKit technology alllegedly part of Photoshop CS6?
I find only limited image import options under Photoshop CS5 and CS6. Under CS3, I have a number of options which I have used frequently, regarding preview, zoom, descreening, filtering, stretch, noise removal, fading, grain, etc.
None of these seem to be available under either CS5 OR CS6. In fact, under CS5, under "FILE>IMPORT", I I don't even GET the Canoscan 8400F opton. This is pretty basic stuff, getting good quality off a scanner. Do I need to go back to CS3 for everything? It actually worked.
when importing a sport color tiff created in photoshop to illustrator the spot color image is not getting imported properly.
View 3 Replies View RelatedWhen I import images (using Xara Designer Pro v7.1) I do I the images to arrive at their actual image size (in pixels)?
e.g. I just created an image which is 788x 953, however when I import it (using File ==> Import etc...) it arrives at 500x376!
I was rendering my revit drawing using 2 pcs and know i am wondering how i would import these rendered images into the 1 drawing?
View 4 Replies View Related