Lightroom :: Files Not Showing Up In 4.4?
Jan 29, 2014
I was reorganizing/rationalizing my hard drive file folders outside of Lightroom. Now not all the images in the folders show up in Lightroom 4.4
For instance:
In a 2014 folder there are 25 files. Lightroom's Folders panel shows the number as 15. If I try Import it shows all 25 files but the missing 10 are greyed out and thus not available for import.
If I Syncrhonize the folder, the little dialog says there are 10 files to be imported, but when I click Synchronize another dialog comes up saying there are no files to import.
View 2 Replies
ADVERTISEMENT
Oct 23, 2013
LR5 stopped listing my previously imported folders/files from my external drive.They show up in the Import dialogue but as the images were previously imported, they are "grayed out" and cannot be reimported. How do I get LR to list them?
View 8 Replies
View Related
Aug 12, 2012
I save a photo that I've edited in photoshop cs5, either jpeg or tiff, and when I go to Lightroom 3.6 I can not locate the file. It shows up in bridge under the right location. I reinstalled both Lightroom and photoshop and no change.
View 3 Replies
View Related
Feb 26, 2013
when i convert raw photos from my olympus omd em5 into DNG's and export them to my external hard drive , i do not get any thumbnail previews , they can only be seen if i view the files through lightroom4 import , if however i export in other formats such as jpeg ,tiff etc.. i get a preview thumbnail . Iam using latest imac and running osx 10.8.2.
View 20 Replies
View Related
Apr 11, 2013
My raw files from my nex7 camera are not showing up to be imported into lightroom 3.6. I see that the camera is supported by lightroom so why do theynot show up?
View 1 Replies
View Related
Mar 1, 2014
Why the aren't showing now but the exported files data to that folder is at zero. What I can do to make it reflect what's in the folder?
View 2 Replies
View Related
Jan 4, 2013
I have just bought a Panasonic GH3 which is able to sync and add GPS data to images from my phone to the camera.
On importing the files to LR 4.3, the GPS and Altitude sections of EXIF remain blank. On the import preset I use, the Camera Info section is all unticked.
If I go to the folder where I store my image files (the folder which LR catalogues) after the import and drop the file on to Exiftool, all the GPS information is listed there. That is, the LR import RW2->DNG has retained the information. It is there but not displayed.
View 7 Replies
View Related
Mar 8, 2013
I have just noticed that new PSD files (with transparent backgrounds) are displaying in Lightroom with a gray background where the transparent areas are in the image.
Has this change happened in the 4.4 update on the Mac? I can see previously imported files show a white background but when I click on it to view in Develop mode it the tranparent area of the picture changes to gray.
I would prefer this to be white (as it was), is there a way to change this in LR as I really don't want to have to open each image in PS and drop in a white layer behind it.
This was working fine before but has now changed, I hope I haven't altered something in the preferences as I can't see a way to change it. I'm not referring to the Background colour in LR prefs as that just changes the area surrounding the image, I am referring to the transparent area of my pictures.
View 22 Replies
View Related
Nov 29, 2013
I have LR4, and once I make some develop changes I've been exporting the files I want to use as DNG. I then open them in PSE10 to make final edits. It's been working fine, actually I had an older version of Adobe Raw in my PSE on my other computer. So when I opened in PSE it would ask if I wanted to conver to compatible version to edit in camera raw. I always said no b/c I didn't need to do anymore raw edits. Now that I have installed PSE on my new computer, it has the new ACR version I guess. When I open the DNGs to edit now I no longer get this error message, but it's showing my contrast, etc. as a standard raw setting instead of the changes I made in LR. Some are showing....like vibrance, but "recovery" which I know is "highlights" in LR, and other things are not showing correctly. I know that the options are different, but I don't want to use the ACR settings that it's using when I open the file, or have to go through them again.
View 3 Replies
View Related
Mar 26, 2013
All of a sudden, when I save files out of PS (CS6), the file name shows on the desktop, but there is no icon. One shows briefly right after th file is created, but then disappears.
View 1 Replies
View Related
Apr 6, 2012
I am trying to load patterns, and when I click on Load Patterns..., none of my .pat files are showing. I only have one showing right now, and that is only because i did the following: I clicked the "Reset to Default" button, which brought up the default patterns. Once that was loaded,
I reset that as the default and now that is the only .pat file that shows. If I go to the preset folder in CS5, I can see the list of .pat files, yet they won't show up when I try to load a new pattern folder.
View 3 Replies
View Related
Dec 31, 2010
Recently had problematic re-install of both X3 and X5. Finally succeeded in sequential numeric order (i.e. first X3 and then X5). However now, CONNECT X5 no longer displays CDR vector file thumbnails. Currently CDRs are associated with X3.
View 14 Replies
View Related
Sep 13, 2011
When I export a jpg file from my laptop with windows 7, the file has a lock on it. I don't have the drawing locked but the file shows up locked when I try to email or view and the clarity of the jpg is fuzzy. I don't have this problem when working on my computer with windows xp. Also when the jpg is locked, it does not read on my mobile phone. What do I have set wrong?
Also on my XP computer when exporting the page is black but exports fine. I would rather see the file I am exporting, I have looked at all the settings but don't see why this is happening.
View 1 Replies
View Related
May 22, 2008
For some reason very often in PS CS3 if I go to File > Open Recent it doesn't show me the most recent files.
View 2 Replies
View Related
Dec 18, 2013
Why do the files I export at 300 x300 px show up on my clients computer at twice the size His file properties say my artwork is 694 x767px.
View 5 Replies
View Related
May 2, 2013
I had a file which, opened with Civil 3D 2013, worked fine, but one of the SID images disappeared and was shown as "corrupt" in the same drawing opened in Civil 3D 2014.
The problem was that the file name contained a character in a font not recognized by R2014. (The file name was G1105001_095-ps 12_5æ.sid) Once I renamed the file and re-attached it in 2014 it worked fine. 2013 processes this font type with no problem.
View 2 Replies
View Related
Jun 26, 2012
I attach an xref to a drawing, plan profile, and align the parts of the xref in each viewport the way I want them to appear.
The host drawing is a generic plan profile sheet border. The viewports are set to the same scale same annotative scale, and are undefined, not a plan or profile viewport. I save the drawing and get out of cad all together. I restart cad and open the drawing. The plan view viewport is visible and the xrefs are also. In the profile viewport nothing is visible or only one line is visible. Items in the view port are viewable, not frozen in the viewport, not turned of. The annotative scale is exactly the same for all viewports as is the xref drawing.I am xrefing a civil 3d 2011 aliment and profile drawing into these sheets. The only way to see the xref in the view ports is to detach and reattach the xref. To make things worse this does not happen to all drawings that are using the border that I used to create this drawing set.
View 3 Replies
View Related
Oct 17, 2012
More than a problem, this is a doubt. Well, I was working on an illustration, just trying things here and there, and so I have many different layers of elements, some of them I want show, and some of them not (I don't want to delete them though, cause they may be useful later). At some point I realized that when I saved the file and went to see the preview (space bar) in its folder, the image had both hidden and shown elements.
So this is my doubt: is this normal? is there a way to show the preview with only the shown elements? Of course, when I export the file to .png, for example, I get the picture I should get (without the hidden stuff).
View 4 Replies
View Related
Apr 6, 2012
Just recently, my pictures located in folders have been coming up in random (not numerical) order when I try to open a file in Photoshop. Instead of bring listed in alpha/numeric order, the files are all mixed up.
If I click on the View Menu box that appears when I open a folder, and go to Details, I can get the images back in correct numerical sequence by clicking on the bar above the file name. However, when I try to open the next file, it has reverted back to a random sequence.
View 3 Replies
View Related
Sep 25, 2011
I have checked my settings from PSPx3 with PSPx4 and everything seems the same when using the paintbrush tool but yet every time no matter the hardness level of the brush i end up with a white border on my texture .. NOT visible inside the program itself but becomes visible once I apply the texture to avatar.
View 4 Replies
View Related
Oct 25, 2011
An IPN file is showing multiple assembly files in it's browser even though I have confirmed there is only one of the assemblies in the IAM file.
I'm not sure if it's causing any real difficulty in the IDW views but it's not giving me any confidence.
When is the poor, undercared-for part of the software going to get an overhaul?
View 2 Replies
View Related
Sep 16, 2013
OS: Windows XP
Gimp v 2.8
Not sure when this started happening since the last time I used Gimp was about a week or so ago and everything was fine at that point... Now when I open these ".xcf" files I've been working on in Gimp I see this strange Blue Scribble that is showing in the same location for pretty much all the xcf files I opened.
I went through every layer in the "Layers" window and made each one NOT visible in an attempt to see if it was something on one of the layers, but it remained there even after ALL layers were no Longer visible. I also created a new xcf file, saved it, then re-opened it in Gimp and NO scribble was there...
If I export one of the files showing the Blue Scribble into any other format and then re-opened it in Gimp the Blue Scribble is gone too.
View 4 Replies
View Related
Feb 28, 2013
My recently edited files do not show in the editor. All the repairs, optimise etc have been done. Photos have been saved as Jpeg and PSD and the check box to save in Organiser also ticked. Timeline does not show anything saved today and untagged media is not picking up anything.
View 8 Replies
View Related
Dec 26, 2011
I just upgraded from 12 to x5 and for some reason it looks like Corel has chosen to make the file default to only showing the page as the thumbnail. Whereas before the entire file was displayed in thumbnail. This would work fine as long as you only want to keep your design elements all within the page frame, but I don't know one Corel Designer that does that. (only Word and Publisher users do that because they have to)
View 3 Replies
View Related
Jul 15, 2013
I'm working on the cover and editorial pages of a large publication and used CorelDRAW X6. Converted the pages to PDF and sent to press folks who use Kodak Insite to put the publication to press. They noticed on the CMY channels a white "X" strangely going from corner to corner on the pages. They eliminated it on their end before going to press. Initially, the proofing pages had all content within the bleeds powerclipped to 8.5x11 and then the pages contents were extracted to create bleeds, which left the dreaded "X" behind. I've been in the biz for 30 years and using Corel exclusively since it's inception (10,000's of hours with DRAW) I understand this is the way X6 treats powerclips now and I can select "none" in the context menu to eliminate the "X"... but who da thunk it would show up in a press file!?
I'll go to wireframe mode and proof pages from now on..If I say I don't want a powerclip anymore, I don't want to jump through hoops (or a handful of mouse clicks) to remove it. Any word on this being altered in future updates/versions?
View 13 Replies
View Related
Jan 2, 2013
I am having an issue with drawing files. I have set views on assembly files. But on the idw file it is showing wrong views... And this is making problems when i am trying to give dimensions. I have attached jpg files.
View 7 Replies
View Related
Nov 13, 2012
In the develop module, when I switch to B&W treatment, my understanding was that a different set of sliders such as fill light, brightness would appear. I just see the same sliders as with color treatment.
View 1 Replies
View Related
Nov 10, 2013
I have been using LR for quite some time and always import my photos from the HD into LR. When plugging in my HD to my laptop it has ALWAYS come us as the F: drive - today for some reason it is coming up as the E: drive and therefore ALL photos are "missing" as it were. I have tried my HD in all 4 different USB ports I have and they are all coming up as the E: drive.
View 1 Replies
View Related
Dec 29, 2011
I'm having a new problem after installing LR 3.6 update on my Mac running OSX Lion 10.7.2.
When importing a new batch of photos, the folder containing those new photos is not listed on the left-hand side "Folders" tab where they should be. The photos exist in my catalog, and work fine. I can search for them by date, and they are indeed on my hard drive in the correct folder. LR just isn't showing the folder. I've tried importing a number of ways, including Moving the photos, Copying them, or simply Adding them with similar results. I can create new folders using "Create Folder inside..." just fine, and that folder remains perfectly useable. When I try to create a new folder in LR named the same as one of the invisible folders, it says that folder name is already taken. This happens on local drives and external drives.
I've tried repairing permissions on my local disk, and verifying the external drives in Disk Utility. I could solve this manually, and create the folders myself in a series of re-names and file moving. But this is not a good workflow for me. I'm hoping this is a temporary bug with the new release.
View 8 Replies
View Related
Aug 13, 2012
I can scan a photo and save it on the desktop.If I go to LR3 to import the photos they don't show up on the desktop in LR.
View 2 Replies
View Related
Nov 28, 2011
I've made development changes in Lightroom to photos on my laptop. However, they aren't showing up when I import them to my desktop (I'm not applying any import settings upon import).
View 8 Replies
View Related
