Lightroom :: Importing Files To 4.3 - GPS Data And Altitude Not Showing
Jan 4, 2013
I have just bought a Panasonic GH3 which is able to sync and add GPS data to images from my phone to the camera.
On importing the files to LR 4.3, the GPS and Altitude sections of EXIF remain blank. On the import preset I use, the Camera Info section is all unticked.
If I go to the folder where I store my image files (the folder which LR catalogues) after the import and drop the file on to Exiftool, all the GPS information is listed there. That is, the LR import RW2->DNG has retained the information. It is there but not displayed.
View 7 Replies
ADVERTISEMENT
Aug 18, 2013
I have recently imported pictures *.CR2 with *.XMP containing GPS coordinates and altitude information.
From my last import (LR4.1 or 4.2) I remember that I was able to drag pictures in the Map view adjusting GPS coordinates, without touching altitude information which was what I needed.
Today I discovered that as soon as I move an image on the map, the altitude value is automatically deleted. And this happens in LR4.3 and also in LR5.0. I understand that if you change the GPS position, the altitude changes also, but for adjustment I have to make, there are no big altitude changes therefore keeping the original value for me is good.
Is there a way to "lock" altitude number, in order to keep the original value, when moving photos on the map?
View 1 Replies
View Related
Jun 21, 2013
How do I make Lightroom automatically fill out the Altitude field as well, when dragging a picture onto the map? I don't suppose it's all too common to be anywhere above (or below) ground level, and I do believe Google Maps has altitude information in it. Roughly at least. And if I where on a tall building, or in a mine, I could still change it afterwards.
I'm using Lightroom 4.3 atm, can I make it do this?
View 2 Replies
View Related
Oct 18, 2013
I have just upgraded my computer with a faster processor and larger hard drive, as I've recently bought a camera that takes much bigger photos (5D Mk3). This has required me to also upgrade software from Lightroom 2 to Lightroom 4.
When I first opened LR 4, none of my photos (or at least the metadata) from previous hard drive appeared. On looking through the hard drive I have found both the photos (which have transferred across successfully) and what appeared to be the old LR 2 metadata (file name "Lightroom 2.lrcat"). I clicked on the lrcat file and a pop-up advised me to select "Upgrade catalog to LR4" which I did. The process appeared to have worked because it opened LR4 and showed the folder structure and images. Not all of the info is however there on LR 4 screen; in the Library of LR4 each of the folders has a "?" over it, and when I move the mouse cursor over the displayed image in the viewing pane, a message says "The file named "XXXX" is offline or missing". So it seems that LR 4 does not know where the photos are.
how I re-link the metadata with the photos? Is it simply a case of clicking "Library" tab (top of Library window) and then "Find missing photos", or is there a better way of doing this? I have 14000 photos in dozens of folders to re-link up with the meta data.
View 1 Replies
View Related
Aug 6, 2012
I've just started using a data reader to import my photos to my mac but have realised that the photos that I have imported have not saved to the hard drive. If I remove it and try to edit a photo in previous import, it says it can't find the file.
View 4 Replies
View Related
Dec 24, 2013
I have just downloaded and installed LR5. I have been using LR4/3/2 and have always successfully imported catalogs in the past. This time LR5 appears to do most of the work as a file almost the same size as the original LR4 catalog is created, but the "catalog upgrade in progress" message just freezes.Should I reinstall LR5?
View 6 Replies
View Related
Jan 29, 2014
I was reorganizing/rationalizing my hard drive file folders outside of Lightroom. Now not all the images in the folders show up in Lightroom 4.4
For instance:
In a 2014 folder there are 25 files. Lightroom's Folders panel shows the number as 15. If I try Import it shows all 25 files but the missing 10 are greyed out and thus not available for import.
If I Syncrhonize the folder, the little dialog says there are 10 files to be imported, but when I click Synchronize another dialog comes up saying there are no files to import.
View 2 Replies
View Related
Apr 7, 2012
I have a Canon Rebel XS 1000D that I have been recently shooting RAW images with. However, when I go to import the .cr2 files into LR, it says that it does not recognize the format.
View 6 Replies
View Related
Oct 12, 2012
I am shooting raw (D800), importing with import settings set as none or zeroed and when they open in LR the image is clearly processed (as if it was auto toned or something) where is the flat raw image i deserve?
View 3 Replies
View Related
Dec 13, 2011
I upgraded to LR3.6 today for LR3. Now Lightroom cannot read any files I try to import. I tried re-installing. Would it be safe to overwrite 3.6 with 3.0?
View 7 Replies
View Related
Jun 23, 2012
I started editing a session on my laptop using LR3. I now want to move them to my desktop and edit them on LR4. (I know I need to make them the same version, but alas...) When I try to import them, they are greyed out and no allowing me to import. I saved them as dng files on a flash drive to move them over.
View 2 Replies
View Related
Jun 11, 2012
I have setup multiple folders for each year under Pictures in Windows 7. Have recently had to restore Lightroom and upgrade to ver 4.0.Problem is when try to import new photo, the photos go to subfolder I specify, but the tag/label in Lightroom goes some other place under pictures not the sub folder.
View 17 Replies
View Related
Nov 26, 2013
I am using Lightroom 5.2 on a Mac with Fusion Drive and always have issues importing DNG files into Lightroom. Any potential causes for this? I see the white bar showing it is importing but it never finishes and I end up having to close lightroom and try again. The images are stored on my desktop.
View 2 Replies
View Related
Mar 14, 2012
"preview Unavailable"did some more shooting today and same thing.when I downlaoded yesterday the images were not there, so I did a fresh import & it tells me there are no new images for import as I have 'don't import suspected duplicates ticked. I unticked this option and selectively imported the missing files - they came up but next to a duplicate thumbnail had that ?
View 5 Replies
View Related
Oct 23, 2013
LR5 stopped listing my previously imported folders/files from my external drive.They show up in the Import dialogue but as the images were previously imported, they are "grayed out" and cannot be reimported. How do I get LR to list them?
View 8 Replies
View Related
Aug 12, 2012
I save a photo that I've edited in photoshop cs5, either jpeg or tiff, and when I go to Lightroom 3.6 I can not locate the file. It shows up in bridge under the right location. I reinstalled both Lightroom and photoshop and no change.
View 3 Replies
View Related
Feb 26, 2013
when i convert raw photos from my olympus omd em5 into DNG's and export them to my external hard drive , i do not get any thumbnail previews , they can only be seen if i view the files through lightroom4 import , if however i export in other formats such as jpeg ,tiff etc.. i get a preview thumbnail . Iam using latest imac and running osx 10.8.2.
View 20 Replies
View Related
Jun 18, 2012
successfully scanning photos into My Pictures. have been able to import first batch into LR3 but having a problem with the last half. i get the following message on the problem files " preview unavailable for this file". when i double click the file i get the following message "could not read preview".
using a nikon coolscan V ed negative scanner and vuescan software. no difference in naming of files between imported ones and unimported ones. again, all files successfully scanned into My Pictures.
View 4 Replies
View Related
Sep 3, 2013
I've got a boatload of PSD files in Aperture with keywords and other metadata. I want to import these into LR5.
Aperture will not (AFAIK) write the metadata I have in Aperture to the files themselves since they are PSDs. But it does write to XMP files, so I exported a test batch, PSD + sidecar of same name to a folder. I go to import that folder into LR5 and it works, except no metadata.
I checked the metadata in the sidecars with a text editor; it's there.
I tried the Metadata>Read Metadata from File menu; nothing.
View 6 Replies
View Related
Apr 30, 2012
I have just upgraded to LR 4 RC2 and found that it took two hours!! to import NEF files from my Lexar 400X 8Gb CF UDMA card....I did several trials and it seems that the problem appears when I set some keywords before starting the import procedure. When I put no keywords at all, Import runs as fast as with the previous version of LR4..
View 2 Replies
View Related
Dec 16, 2011
When LR3 is installed, it will not import my CR2 files. tried an un-install and still no results. when i install LR3.5 on laptop (without Lion) everything works fine. what is going on?
View 1 Replies
View Related
Jan 11, 2012
After installation of LR4 Beta,Thumnails of Video files(AVCHD) were not generated. After restarting the system, I could view thumbnails and also could import files in to LR4.I enjoyed using vibration etc and it is easy to export (to H264) in comparison to cs5 PP. Now 2nd day onwards, I am not able to view thumbnails(video files) for importing nor files could be imported.Files already imported work fine with thumbnails. (Thumbnails while importing Video files are being displayed normally in LR3 without any problem)
View 2 Replies
View Related
Apr 24, 2012
Importing .cr2 files from a Canon 60d into Lightroom 4, or any other version of LR? I've been trying for quite a while, and while the video files show up for import, the raw files do not. 0 files listed. I'm simply trying to use the Import button in the Library, and selecting the 60d camera from the list while it is USB connected to my machine.
Details:
Lightroom version: 4.0 [814577] (Adobe Camera Raw 7 installed also)
Operating system: Windows 7 Ultimate Edition
Also have the entire Adobe Master Collection CS5 installed (and fully updated as of this AM). Memory card was formatted in the camera itself. Canon's DPP has no trouble importing the files via the EOS Utility, and I see the camera/SD card in Windows Explorer as a drive letter, so I know it's recognized.
Camera is fully firmware updated (1.10).
View 5 Replies
View Related
Dec 2, 2012
When the import "Preferences" changed.When I import DNGs, it COPIES them to another HDD and I cannot find out how to stop this.When I go to Preferences I do not see any way to change this. I am about ready to uninstall and reinstall.
View 3 Replies
View Related
Nov 3, 2013
I am having trouble importing RAW CR2 files from Canon 5D and 7D into Lightroom.
Some / half of the files will import from the memory card, but at some point in the import process I get an error message that reads "The following files could not be imported because they could not be read" . Then I am unable to import the remaining files at all.
I'm running Lightroom 5 on OSX 10.8.
I have been getting this problem for the past 6 weeks. Usually If I shut down Lightroom, restart computer and begin the imprt process again, this second import will work fine. I put it down as a bug that wasn't a big deal, because after 2 or 3 import attempts everything would be OK.
But now Lightroom won't import my final 130 images at all. So far I have
- deleted the Lightrom preference file (it didn't work)
- tried different USB ports, cables and card readers (it didn't work)
- checked my permissions on the destination folder and disk, and confirmed that they are "Read and Write"
I don't think the files are the problem as I have been able to import 400 of the 600 RAW files from the memory card so far.
View 3 Replies
View Related
Jan 29, 2014
LR has been working fine and now nothing. NEF files will not import on my Mac.
View 1 Replies
View Related
Jan 20, 2014
I recently upgraded to a new Mac mini. I migrated from a Macbook Pro. It seemed to work fine at first but now I'm getting this error:
Lightroom sees them fine until I try to import. It's not the card as I'm able to import them into the Macbook with no issues. Could this be a licensing issue with the new Mac mini?
View 2 Replies
View Related
Apr 11, 2013
My raw files from my nex7 camera are not showing up to be imported into lightroom 3.6. I see that the camera is supported by lightroom so why do theynot show up?
View 1 Replies
View Related
Mar 1, 2014
Why the aren't showing now but the exported files data to that folder is at zero. What I can do to make it reflect what's in the folder?
View 2 Replies
View Related
Aug 19, 2012
I work with a Sandisk 32g card connected to a Sandisk Card reader.I work on a MacBookPro.I have the latest Lightroom 4.1I start importing from within LR. So, FILE - IMPORT PHOTOS AND VIDEO And then I import on my external hard drive.The thing that buggles my mind : At a certain point in the import, LR changes the color tempretaure of some some files !So, the first 63 first images imported are at the right temperature and then, all the rest is wrong. I went and open the CF files on the FINDER, and all the files are at the accurate color temperature on the card itself.
View 9 Replies
View Related
Jun 8, 2012
The hard drive on which I kept my LR library recently crashed. I need to import my files to LR from my backup HD. Is there a way to do this without creating duplicates and preserving the LR edits?
View 1 Replies
View Related
