I have one folder out of many where the photos all of a sudden don't show up when I click on that folder, If I go to the hard drive where the photos are they are all in the folder most are Nikon Raw files. O I thought let me try to re import them well the photos show up but they are greyed out like an already imported file is. how can I get these photos that lightroom % thinks are already imported to show up in the library.
View 13 RepliesI have been useing LR5.3 without any issues for a while. Suddenly, I cannot import files from anywhere. I tried optimizing catalog with no results. When I import, it gives me a message box saying "Some import operations were not performed", then lists all the files under "could not copy file to the requested location", and offers me a link to "save as"
View 2 Replies View RelatedI'm on a Mac with Lightroom 5.3 freshly installed. It worked neatly for a couple of days when importing either from my iPhone or my 6D (from the card reader). Suddenly it stopped doing that. I've been through all the discussions and I've tried the following steps:
- delete the preference file (and re-start Lightroom)
- re-install Lightroom
- create a new catalogue (won't work either)
- checked the permissions (as in the beginning, it would tell me that it can't read my files - but they worked perfectly!), which were fine
- cleared the "recently used" file paths of the import dialogue
- re-booted my Mac about a gazillion times
- updated the RAW software
- re-installed Lightroom again (but having deleted pretty much everything from the HD that was Lightroom related)
It just won't work. But before I re-installed Lightroom, it would still give me the "error: can't read files" sign. Now, it simply starts importing (the progress bar starts anyway) and then it just stops at one point, not having imported anything. Lightroom doesn't freeze, it just doesn't do anything and the progress bar stops. I wanted to attach a screenshot to show you what it looks like right now, but that didn't work either, so whatever.
Here's the thing: it still works in Lightroom 4. So now I've been importing into Lightroom 4 and adding the files without moving them to Lightroom 5. But what kind of workflow is that? It's literally killing me because I've paid money for the software and I was patient enough to go over all the trouble shooting, but I'm really out of wit.
My main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
Everything was working fine. I've had Photoshop forever. I had to download the software again and reinstall Acrobat to get it to work. Photoshop works fine, however, when I download a photo that someone sends me and try to open, I get an error message.
If I open Photoshop, the image opens just as usual, no problems.When I go to the control panel and try to associate JPG with Photoshop CS 6, I can't. I find it, I try, but I still get the same choices and none of them are Photoshop. I've clicked browse. I've found Photoshop.exe. I've clicked "open" and nothing happens. It doesn't go into the recommended programs.
TIFF is fine. PSD works. It's only JPG.What should I do?
One shows my finder where the psd files are, and the other shows my desktop within the Smoke library. Only one psd file gets recognized.I tried copying them to different locations, and renaming them, but nothing worked.The ones that don't get recognized are in CMYK colorspace. Is that a problem?How else can I get the layers into Smoke? By converting it to RGB, my layers get flattened.
View 3 Replies View RelatedLast week I bought Photoshop Elements 11. I used the program to open pdf-files and work with it. However the second time I opened Photoshop I couldn't open any pdf files anymore. I uninstalled photoshop en installed it again. Unfortunately this didn't work. I still cannot open any pdf-files. Photoshop sais: error program.
View 2 Replies View RelatedWhen I try 'placing' an image into a AI document, it appears to be embedding the file [be it a psd, tiff, jpeg etc]. Why would it of stopped linking the file?
I spotted this because in my Layers palette it says 'image' or the file name next to the thumbnail, as appose to 'Linked File' like it always has done. And in my Links palette, I've got the odd looking icon [I'm not sure what it is] on the RHS. Why would AI be embedding the placed files all of a sudden, have I clicked something?
Got a new computer, put AutoCAD LT 2010 on the machine, justlike the rest of the office, but also installed excel 2010, when the rest ofthe office has 2007. when insertinglinked spreadsheets from the new computer, and we update the links on our oldcomputers, Acad fatal errors out. Thisis because of the difference in the excel versions correct?
View 1 Replies View RelatedWe have multiple linked Revit files from consultants in the same hospital Revit model. How can we turn off all grids and levels in all of the linked files globally. We want to avoid having to do it individually for each view & each linked file.
This project is currently in Revit 2011. If not 2011 is it possible in 2012?
I have several architectural models linked into my central file on a project. For this project, there is an addition to the building that is a design option. When I look at the linked files, though, I can only see the existing construction. I also know how to copy/monitor levels, but I want to view the architect's room elevations in my model. How can I copy the architect's design options and specific views into my model?
View 1 Replies View RelatedQuick question, do shaft openings work across linked files? I have an elevator file I have linked into the main file. It has a shaft opening but doen't appear to be cutting holes in the floors inside the main file.
View 1 Replies View RelatedI wonder why image that imported to illustrator be linked, not included to Ai files like coreldraw does.In my office, other computers, their illustrator could read the linked image even the image file has moved to other folder..Why my illustrator CS5 couldn't recognized it? is there any setting I should change?
View 1 Replies View RelatedI have a AI file and it is a map. On this map I have Interstate and Highway road sign icons that were created in AI. When I place a new AI file icon, resize it, and then embed the AI file a stroke outline appears around the road icon and thus making the icons very ugly. If I place it and leave the icon alone and then embed it the file is fine. its only after I re-size it.
I am using AI CC 17.1 . When I embed the image I can’t find the option to un-embed the file. I used to be able to do that with Ai 6. is this a bug in CC?
I have a workflow where I will link a few PSD's and the other designers can modify the PSD files in Photoshop while I'm working on different content in the AI file. This allows us to work simultaneously and be more efficient with time, since my AI edits aren't dependant on them fixing up the images - it works great.
What I really need is to link an AI file and be able to snap to points on it while I'm creating a separate AI file - The linked AI isn't changing much but I need to see any updates made to it so I can adjust my AI accordingly - but it requires precision and I have to be able to snap to points/edges.
I've wanted this since Illustrator 10 and I can't believe there's no possible way to link to an AI or PDF and be able to just snap to the points, obviously AI knows about the points and lines, the linked content scales and is vector based. By default I can see the AI file but it has the "X" over it and all I can snap to are the edges/corners of the box it's placed in. This doesn't work for me and I have a hard time believing I'm the first person in the world to want to do a simultaneous workflow. I don't want to be able to edit the linked AI at all, just snap to its points.
Is it possible to force Illustrator to actively update linked files as they are saved in Photoshop? I'd like to place a PSD into AI, for Live Trace, then edit the PSD and see the updated Live Trace without clicking in Illustrator.
AICS 5 or CC
Occasionally I have to edit or use old pdf files that were created by my predecessors, who created the files by linking artwork placed within the file. Ordinarily that wouldn't be a problem, except that the folders containing all the linked files are long gone. When I open the files in Reader, I can zoom in on the images very closely and see that the image in very high resolution, which seems to indicate that there is vector art within the file, but when I open in Illustrator I get the message that says the artwork is no longer located at the indicated link. Is there any way to get this phantom version of the art that is only visible in Reader? I have opened in photoshop and grabbed it that way, but if there is a way to get it still as a vector, that would be better.
View 9 Replies View RelatedI can't import photos anymore : when clicking the import button, I get the following message : AgPathUtils.getStandardFilePath: can't create directory at: /Users/DR/Pictures
I recently had my HD replaced with a SSD, and still using the HD as a secondary drive on which I have my catalogue.
I got the beta 4.1 and it's giving me the following message when trying to uploading images (update collection) to flickr. LR 4.0 was working great. Is there a specifc forum for 4.1beta errors?
"An internal error has occurred: Error Domain=NSXMLParserErrorDomain Code=4 UserInfo=0x11b7b1d80 "Line 1: Document is empty"
I reinstalled both LR4.2RC and Photoshop CS5 on a new drive. But now I can't seem to edit in Photoshop from LR. Am I doing something wrong? It worked fine before (except for getting the "Render in Lightroom" thing because of the differnece in process versions). Using Windows 7 Prof. Cntrl E no longer works and Edit in Photoshop is grayed out on the drop down menu. Both work independently just fine. A setting in LR perhaps?
View 1 Replies View RelatedIn the past few months, my ability to see the preview of a DNG file on my macbook pro (mountain lion - up-to-date) has been lost. I've been having some buggy issues with my computer, so this weekend I did an erase/clean install of Mt. Lion, and now I'm slowly adding everything back on. I have LR 4, and the CS5 creative suite (did all necessary updates last night on all software). I kept my fingers crossed that it's all I needed to do to finally see the DNG previews again. The major kicker is that I have access to all these files on another mac, with updated software, and I can view the previews just fine on it.
View 2 Replies View RelatedI cannot export pics anymore, when I press the export button the normal screen comes up but slightly different and NO export button...this wouldn't be because I only have 10 days left on the trial period would it?
View 9 Replies View RelatedI am looking for a plugin / macro or something regarding externally linked files that
1. enables custom (or full) resolution of the file preview
2. adds edit option that edits the file in its assigned application (eg .psd in photoshop)
3. then after saving by that application, having the preview in CD being updated, if not automatically, at least by means of a click
(i can't grasp yet why still after all those years, things like externally linked files and text styles are still in that primitive, not really serving any purpose, or working, form ..... why basic, key DTP features that are supposed to have so powerful potential are being so severely neglected ... really beats me)
when copying a linked model in the host file to multiple levels, why the detail lines are showing in my level from the other levels?
I have attached 2 images to show the V/G setings as well.
I am trying to control the visibility or visual style of the model but through the linked arch file. Everything is wireframe or simple black and white lines and I can see all my devices and equipment for the entire length of the building when I only want to see the devices in the room or where the camera is. It seems when I switch to hidden only my devices change no the linked arch model nor do any of my devices on the other side of the wall go away. I am sure for some the answer is simple but it is escaping me entirely. where I can better control the visual styles in my views of not just my own stuff but the other disciplines as well. Do I have to do anything to the linked files? Going through the Visibility Graphics Links tab doesnt seem to work either.
View 5 Replies View RelatedI am having difficulty placing components in my Revit Architecture 2012 model. They are wall hosted (outlets) & floor hosted (floor boxes) components. I have taken the MEP, Base Building, Interiors, and Structural models and linked them into my new file. I have linked them in as overlay. Should I have changed the reference type to attachment?
When I go to place my components I recieve the following notifications from Revit and am unable to click any walls or floors: "Click on Wall to place Instance" (outlets) "Click on Floor to place Instance" (floor boxes). How do I set up these linked files so I can place my families?
In Illustrator 6, you have to check "include linked files" every time you save a document. If you don't, the next time you open it, you are looking for the missing link. Is there a way that I can set a default so that it automatically checks it each time?
View 1 Replies View RelatedI have tried the Links dropdown and the Document info dropdown but no files appear at all.
I have three linked/embedded files.
Need to finding out the names of the files..
I have linked files in a realtive path /sheets/ in my adboe ai file. We are generating 10,000's of images and placing them in the /sheets/ folder. The naming scheme is the same.
However when I share this project with a friend over dropbox. ai + /sheets/ folder. When he opens it up he's getting a ton of errors about the files not being found.
Does illustrator ignore linked file locations if the path isn't ABOSULUTE? Or if the newly generated images are overwritting the previous ones?
How can I fix this because we are looking at 10,000's of large image reaplcments that will take DAYS of mannual labor?
I work at a small company with multiple designers (5 of us) where 3 of us work remotely. We use dropbox to manage our files so that everyone has access--we keep client files in specific folders and stock media in a shared folder.
Currently whenever we open a file that's been edited by someone else, we have to go in and individually relink the files. Some would prefer to embed the files, however this can increase filesize by 60-400mb. Our current files total in at around 500gb, so I don't think that's a viable option.
4 of us are on Macs, 1 on Windows. 1 has CS5, 3 have CS6 and one has CC.
My question is this: If we all have the same path to dropbox (or the same path to the file, either way) will Illustrator be able to automatically find the files?
Eg. X:/Dropbox/...
If so, will it work cross platform?
Recently, I am working with illustrator CS6.
After inserting quite a lot of linked images (without embedding), the file size becomes much larger, up too nearly 400MB.
I saved without pfd compatible function already, but the file size is sill very large. I did not face the same problem working with CS5 before, is that a bug for CS6?