I am looking to do a custom border like this in light room [1] . I can do a full border like that as a transparent png file.However if the shot is tight in and has people from edge to edge, the border/watermark cuts them off. Is there a way to add a watermark/border as the background and resize and rotate an image (on a slant) to fit the middle area.
View 2 RepliesI'm setting up styles and trying to play spot-the-difference; I can't see any difference between these three settings.
View 9 Replies View RelatedIs there any way to specify a Photo Border in inches rather than points? Or should I simply divide by 72 to convert points to the inches?
Also, when I have Cut Lines selected, this selected area in red between the two images shows up in the print.
In lightroom 3 I had a border around any photo in loupe view when I dimmed the background using the "L" key (seen only when dimmed). I don't remember ever setting it, it just seemed to come that way. I cannot get this border (which really worked to separate the photo from the background) anymore. I tried all preferences and tried to find this out in Lightroom Help before submitting this question. The border looked like the one you can add in the print module. I notice that when using the "L" key to dim, I also lose the ability to display the information overlay, even when cycling through the "I" key. Am I overlooking a setting or is this just a change to LR4?
View 2 Replies View RelatedIs it possible to change the parameters of a custom ipart in an assembly after it has been inserted, or can I only do an insert using AddCustomiPartMember?
In that case I simply remove the previous occurrence and insert a new one I suppose?
Lightroom 5 (trial) on Mac OS X (Mountian Lion 10.7.5)
I was excited about the book module's "Save as Custom Page" as a solution to preview book we have our lab produce but it seems that several settings are not saved. My intention is for the file name to be under each image but the "Photo Text" checkbox does not stay enabled. Nor, do the zoom settings for the images boxes.
Does "save as custom page" only remember paddding settings and ignore everything else?
in LR3 custom package did not support photo info. Has this changed in LR4 - is there a way to add a caption to a jpeg file generated via the custom package?
View 3 Replies View RelatedHow to ADD (almost) white Border around photo(s) to print in print module (not for creating a JPEG) WITHOUT TRIMMING the photo?
I dont understand why I'm so stupid not to be able to acheeve this simple task with Lightroom WITHOUT TRIMMING the image (altering it's proportion and cutting away photo-content)
(on light-gray backgrownd for instance, to use as cutting indications. I know how to use cutting-indications for images i print without a border)
(i do not whant to use workarounds, the kind of preparing "identity plates", a new one each for infinite variations of proportions to use as fullblown-up backgrounds..)
I have a custom elbow that has an angle of 89° in the tube and pipe author dialog but I cannot select it in the tube and pipe style in the "elbow custom" field where the filter properties are 45° to 90°. I can select it as the standard elbow though where the filter properties are 90° to 90°. This doesn't make any sense. All the other filter properties (grayed out) are the same.
.
IV2013
I've been trying to make a custom border for my images in PS. I already have an action that does this for me:
Back when I printed images myself in the darkroom, I loved FF images and the black edge they have. Here's an example of one of my old prints (scanned):
how to get a somewhat soft black edge like that that isn't perfectly straight? I've found a special brush in PS:CS3 that gives me this:
Now my issue is I need this to be done in an action. That was done "free hand" by drawing a straight line across each edge, then adding the white after with the canvas size tool... Also that brush isn't perfect. I'm looking for something that has that perfect looking blend/rollover as it transitions into the image.
i recently created a gif image using image ready (around 120 different frames) and i would like to give it round edges for instance, how would i go about doing that?
View 1 Replies View RelatedHow do you set an object's annotation, say a line, to display a line's angle or bearing precision to the nearest 20th second.
Kinda like this for decimals:
0.000
0.00
0.0
But for degrees minutes seconds.
Also, I will require the seconds to hide if the nearest 20th second was a 00. I also need a leading zero for minutes if the minutes was under 10 minutes.
Is there any way to use the "Rotate at angle" command outside of the "custom view" environment?
Is there actually any technical reason why the controls in the attached screenshot are not available in the Studio and normal modelling environments?
I have an HP 6500A Plus, and it should be capable of printing edge to edge, even on custom sizes. After contacting both Apple (I am running MacOS 10.8 Mountain Lion) and HP for answers, I burned a lot of time with Adobe either just plain not getting an answer because I didn't buy it or being given the run-around. I need to know what Photoshop is doing to block the available capabilities from working.
View 6 Replies View RelatedI am creating a standalone .exe with VB.net that opens an Inventor .idw and creates a few custom tables. I want one of the tables to have no border at all.
So far I have tried:
Dim oFormat As TableFormat oFormat = oInvSheet.CustomTables.CreateTableFormat oFormat.InsideLineWeight = 0 oFormat.OutsideLineWeight = 0 oCustomTable_Hardware.OverrideFormat = oFormat
But that does not hide the border lines.
I've found no similar code to try out that dealt with table borders or that sort.
I want to use the custom unfolding rules using Bend Compensation with an angular reference to the bending angle.
I have an Excel sheet where I have determined the bend allowance, the set back and from that, the bend compensation. When I compare these values to the values I get when using a K-factor linear unfolding method in Inventor, I get almost exactly the same results.
Tells me the formulas are working. So I implement the formulas in the custom equations. Exactly the same as in the Excel sheet. 10 degrees angle, great results! Yeah! 45 degrees, great results! More yeah! 90 Degrees, still going strong, I think I might make it!
100 degrees.... Fail! Every time an angle goes over 90 degrees, the result is crap.
I have been struggling with this all day long!! So in the end I completely erased the equations from the Inventor custom equations.I just say: Compensation is 1 mm. For all angles. This should no room for interpretation.
Again I try. I have a sheet metal part with two legs. A 100mm leg and a 50mm leg. Flat pattern should always be 151mm. Period.
Again, under 90 degrees and on 90 degrees, I get nice flat patterns. Above 90 degrees, it fails again.
Am I completely overlooking something obvious?? Or is Inventor really bugging on this?
I am working on 2012 SP 2
The company I work for produce drawings for various types of fabrication.
Using Inventor I have a drawing border in which tolerance values change depending on the type of fabrication to be produced. The type of fabrication (0,1,2,or 3) is designated by a custom property entered during part/fab model creation.
This property may change depending on various production factors. The issue I have is how do I get the border to recognize this potential change in fab type and populate the tolerance fields with the necessary information?
I am trying to offset a photo to where it is at an angle and 3D.
Here is an example of what I am talking about.
How do I convert the colour profile of a Lightroom custom printing package from Adobe Prophoto to sRGB before printing? For that matter, how do I save the thing? I have no interest in saving the template, or the collection separately, since neither has any use without the other. And without saving them as one finished item, I have no way to convert the colour profile of that item. I can see clearly from the appearance of the print preview that the above mentioned colour profile conversion is required.
View 1 Replies View RelatedLR 5 does not launch automatically when a card is inserted on my Mac. Previous versions did so & the preference to do so is selected.
View 2 Replies View RelatedI want to get my photo to print with an border that is exact around the entire photo. The one's I am printing are not. The border on top and bottom of the photo are thicker than the border on the right and left. And the photo is not centered. I need it to be exact all the way around.
I am using Adobe Photoshop CS5.5 on an iMac OS X Lion computer. My printer is an Epson 1400. Do you think I should import it to InDesign instead?
trying to recreate this vintage border effects for a lot of photos on my website.
i can make a template and adapt for each one?
I like to put a border on the photo I upload online.These pictures are usually 600 X 400 pixels.A 2 pixels line is just perfect for my use but...it's impossible to have a 2 pixels pencil.You can create a 1 pixels pencil or a 3 pixels pencil but not a 2 pixels one. Why?
At one point, what I was doing is, select all,then shrink the selection by 5 pixels(yes,I like to add the border inside the image)and then use the marching ants as a guide and trace a 3 pixels wide solid line and then erase a 1 pixel line using the eraser but...it's extremely tricky(and time consuming)because there's no real 1 pixel eraser...it's a cross made of 5 pixels and if you're not just at the right spot it erases the thing just bad.
Also,I use to do it by: selecting all, then shrink the selection by 5 pixels and then strike the selection with my chosen pencil but...the damn line is 5 pixels away from the border of the picture on the left side and on top but on the right side and at the bottom,the damn line is only "4 pixels" away.Sure 1 pixel off seems not that much but on a small picture 600 X 400, it shows a lot. How come the selection can't be stricken with an even result?
When installed recently Lightroom 4.0 deleted all my AutoPlay options and inserted itself in all the option boxes. No other options are available. It also reset my System Restore options to "OFF", deleting all my previous restore points, so I cannot restore my registry to an earlier date.
View 1 Replies View RelatedI cant seem to have lightroom 4.4 detect compact flash cards when inserted in reader. Im using USB readers and none of them work. They load on the desktop no problem.
View 4 Replies View RelatedI would like to place a thin white border inside a photo..then I would like to erase a small portion of that border along the verticle side to put my name. I think there is a frame within PSE 11 that does this but I can not find it. I tried to add an example by going to insert photo but I don't think it worked.
View 9 Replies View RelatedPSE9 under MAC OS 10.6.8.
I don't know how I can add to what the title already says. I would like a photo to have a soft border that feathers to invisible. I've tried to set an absolute invisible border (select invert followed by a background erase of the selection) and feathering that, but I inevitably get feathering that starts at the outer edge, crosses over into the photo itself leaving a sharp edge showing, and extends too far into the photo.
I simply want all four of the photo's edges to "disappear" into nothing.
Lightroom 5.0 fails to detect memory card and open import dialog. This has always worked fine in Lightroom 4, 3,and 2. Same cards, same camera, same iMac using OS X 10.8.4. Manual importing works OK, card is detected just fine.
View 14 Replies View RelatedI need to draw a simple medium size line border around a block of text and photo to set apart from the rest of the page.
View 6 Replies View RelatedIs there a shortcut to draw a 45 or 90 degree angle from a drawn line on an angle using the pen tool? ie. Rather than just from the x and y axis.
I trace a lot of maps and site plans.
Im drawing in isometric view and want to change the default drawing angle from 30 degrees to another angle.
View 9 Replies View Related