When moving the sliders the image becomes blurry until the slider is stopped. You do not see the change until the slider is at rest. This occured in the early LR 5.0 beta version but eventually went away in the final. I really do not like this effect.
View 3 RepliesI'm evaluating Lightroom 5 during the 30 day trial and it's all cool except for this one big annoyance that I noticed immediately when trying to work on an image in Develop module. As stated in the title, moving any slider (exposure, highlights, noise reduction, etc.) causes the image to go very blurry for the duration of the slider movement. It goes immediately back to being sharp as soon as I stop moving the slider. This is super annoying, feels as though my eyes are going bad.
What's interesting is that the problem doesn't show up when I'm adjusting the Tone Curve directly, but it will get triggered if I'll expand and use the sliders underneath. So looks like a bug that only applies to sliders.
This doesn't happen at all in Lightroom 4.4, which I still have installed and can compare side-by-side.
As for the hardware, I'm using the 2013 Macbook Air with 1.3 GHz i5 CPU and 8 GB of RAM. The OS X version is 10.8.4 with all latest upgrades installed.
I've already tried optimizing the catalog, giving it more space (currently at 3 GB) and purging it. I'm not using Smart Previews, although I've turned them on for a moment to see if the problem persists with them on - it does. I've also re-rendered the 1:1 preview for the specific image I've been trying it on. Btw, the file is a NEF from Nikon D300 and I'm using the 2012 process (as was the case with LR4). Not sure what else might be relevant here.
I upgraded to LR4 from LR3. After opening LR4 I realized that the Develop/Basic menu sliders are identical to LR3, i.e., Exposure, Recovery, Fill Light, Blacks, Contrast, Clarity, Vibrance and Saturation.
View 2 Replies View RelatedI opened LR today and this time did not click ignore to the message of update to curent. After the update I opened to the current catalog and my images were blurry. I switched to a different catalog and same thing. I selected an image I had not previously edited and it was fine. I started to edit it and after the first adjustment it was not viewable. I clicked to another image and then back. It was viewable, but blurry. To be clear, these are not blurry images, but update is causing them to be this way.
Win 8.1. Previous LR version 5.2.
When I am in Survey View and hit the Z key, some of the previews are blurry. The same thing happens in Grid View. However, in Loupe View, the images are fine when I the 'Z' key. Using Survey View would make things go faster when making my picks.
I tried rendering 1:1 but the returns a mesage that says renders are up to date and rendering was done.
In CS3 after clicking onto the slider "triangle" I can then adjust it with the mouse wheel. I don't appear to be able to do this in CS6. Can this be remedied?
View 5 Replies View Related1.) When moving the the dark or light value sliders, why does it also move the midrange slider? Aren't midrange values independent of light or dark values?
2.) I understand that every histogram is different and there is no right histogram. With that said, it does show if an image is too dark or too light and if I am just aiming for a good balance I am dragging the white slider to the left to lighten it up, and I am dragging it to where the histogram is just touching the bottom. Is there also some guideline to follow for the midrange slider where I can look at the histogram and determine which way to drag the slider?
i want move images library (shortcode (g) ) for overview to the file browser but if i click on pictures i get no data ghost and can't trow the picture in another folder
View 2 Replies View RelatedI cannot move my images from lightroom 4 to photoshop cs5.Iam using a Nikon D600.Other images shot on other camers I can move.
View 1 Replies View RelatedHaving just watched Julieanne K's tutorial re making a Blurb book, she began with her images in a story order. How does one move images within a collection to an order different from how they were uploaded or taken? I guess it is simple, but I cannot seem to do it.
View 4 Replies View RelatedI am ruhnning Windows &7 Pro, 64 bit and I'm experiencing inconsistent behavior in Lightroom 3.5 with regard to moving images within collections. When I try to move an image, to place it in the order in which I would like view the sequence, the image is placed at the end of the sequence no matter where I place it initially. I've tried the filmstrip view and the grid view and it happens in both. I recall doing this without problems previously however it was in the imported Library not a collection, but why would this be different?? One still needs to reorder images in collections. I've made certian to change the "sort" option to user each time I've tried to do this.
View 2 Replies View RelatedI would like to move a selection of images within the same folder. I have done this before with a drag and drop but it doesn't want to work today. I have and keywords for filters but wanted to set up in time/day order using 2 different cameras.
View 1 Replies View RelatedI upgraded to lr5 and am shooting an event that has different groups of participants. To organize the files after I get them into LR, I separate them into folders based on the individual in the image (it is easier than it sounds) . But to my surprise, when I move them, the images are removed from the original folder and are not in the new folder. I am hoping that they are being lost in the catalog and not being deleted.
How can I fiend the images again, and how can I get LR to recognize the images in the future...I am moving them within LR!
I have just returned froma trip where I processed images on Lightroom 5 on my laptop. I now want to move the collections to my main library on another drive and computer that uses Lightroom 4. What would be the best way to do this and will I need to upgrade the Lightroom 4 to 5?
View 5 Replies View Relatedi've managed to fill my mack up with images as i imported all my photos to the MAC HDD rather than an external HDD,,,school boy error : (but i am new to lightroom) as there's 30,000+ is there a way of moving them with out having to reload them to the new HDD? i only found out my mistake when the computer was running on 1% memory.
View 3 Replies View RelatedI had to move my cataolgs from one external HD to another, but when I open a catalog the images are missing. I know my original images are stored in one place and the catalog is stored in another. Shouldn't the images be found if they are all on the same HD?
View 1 Replies View RelatedAfter the OS X 10.8.5 update on my current generation 27' iMac moving 1:1 images results in very low resolution for those areas I am moving to with as long as a two second delay before the image snaps back into full resolution. Not only that but when it snaps back into full resolution you see a shift in alignment and a snapping into place with the nearby area that was already in full resolution. This is awful and is occuring with Lightroom 5 and 5.2.
My iMacs specs are the current generation 27" iMac, i7 3.4 Ghz, 32GB RAM, and the NVIDIA GeForce GTX 680MX 2GB running OS X 10.8.5.
I did not have this issue with OS X 10.8.3.
My catalog in Lightroom 4 is spread over several hard drives and broken into years, with subfolders holding each seperate shoot. I recently replaced the harddrive that only held 2009 with a 3TB drive that should be able to accomodate 2010,2011 and 2012. I would like to move those files onto that drive within Lightroom so that it tracks where they are.
View 2 Replies View RelatedOpened a clear image in QuickLook. Opened in PS CS5 to edit and it is blurry. PS is blurry/pixelated too - the tools, the font, etc. What can I do to fix this? I have had PS CS 5 for awhile now and have never had this problem before. Already tried re-opening, shutting down.
View 4 Replies View RelatedI have a jpg file 1500x1024 pixels. If I resize it down to 400x300 and save it, the image quality is fine in the Gimp window. When I view it outside of Gimp, like in Image Viewer or FSpot its very blurry.
I resized the same image on a Mac using Photoshop and this did not happen, the resized image was perfect. Is it some sort of limitation in Gimp?
In the Scale Image dialog box the interpolation is set to Cubic. In the Save As jpeg dialog box I have checked Optimize Smoothing is set to 1.00 Subsamplingis set to Best Quality
I'm trying to create a new logo and now that I've created it, I try to save it and once saved, It looks very blurry/fuzzy. But in illustrator it looks excellent! It's just in the saved copy that looks horrible. I'm just metally drained and don't know to do
-Illustrator CC
-Macbook Pro Retina -late 2013
I've tried every possible format just about for the logo to be saved as. Even in the browser preview mode in save for web, it looks horrible. I'm needing this logo to be saved as jpeg, png, or something relative.
I have this problem in CS5 that any type of image or line art are always blurry. All my work is for print and perhaps just the preview is blurry but I am afraid that printing will be bad.
Most graphics I bring in are from Photoshop CS5. I make sure they are 300DPI to start and recently learned they should not be in RGB mode but CMYK.
The images I should also mention when placed are very small and I have to scale them to be the correct size. I do not know why they do not place as their original size. So basically it is small size and blurriness.
I am exporting an image for web in Illustrator 6 and my images are all turning out blurry. I have attached a sample image as well as a screenshot of my current settings, although I have messed with the settings quite a bit and I seem to have this problem no matter what I do., URL....
View 1 Replies View RelatedWhen I open an image in Photoshop it looks blurry at any zoom including 100%.Same image looks fine in GIMP, Explorer, etc.Here's an example. The left side is what it looks like in Photoshop.
[URL]
Below is my system info.
Adobe Photoshop Version: 13.0 x64Operating System: Windows 7 64-bitVersion: 6.1 Service Pack 1Physical processor count: 4Logical processor count: 8Processor speed: 3703 MHzBuilt-in memory: 6142 MBFree memory: 1209 MBMemory available to Photoshop: 5350 MBMemory used by Photoshop: 86 %Image tile size: 128KImage cache levels: 4OpenGL Drawing: Enabled.OpenGL Drawing Mode: AdvancedOpenGL Allow Normal Mode: True.OpenGL Allow Advanced Mode: True.OpenGL Allow Old GPUs: Not Detected.Video Card Vendor: NVIDIA CorporationVideo Card Renderer: GeForce GTX 460/PCIe/SSE2
I got some pics taken from my cellphone that I just can't read due to the blurryness from the picture. Is there any filter I can apply or something I can do to make what is written readable?
View 8 Replies View RelatedI have created specific pixel height and width images for Facebook and other Social-Media applications. When I export or save for web, the images are pixelated or blurry. I have tried for art or for type, both seem to provide pixelated images for both png or jpg.
You can see the blurred lines in this image.
ive encountered a problem in X3 when i try to export any artwork or photos to my desktop as jpegs they images are all blurry,outside lines are not sharp at all,ive not altered any settings whatsoever and also found that full A4 images will not save at all,just as a solid black line.
View 2 Replies View RelatedI am fairly new to Corel, and I have been using the program to do a lot of icons to load onto a webpage.
Every time I upload an image, it blurs the edges around the text and the color looks distorted.
The default in previous versions of LR had the sliders set to various positions on import ie. Brightness 50 etc. You could zero out the slider by setting them at 0. Now with the sliders set to 0, yet LR adding a default processing, how to you zero out to start out flat?
View 6 Replies View RelatedHow do I fix blurry prints of clear screen images?
View 1 Replies View RelatedI've been using illustrator to vectorize some of my png files I've modified and rasterized in photoshop. The image trace feature has worked fine for me until yesterday when it started making my images very impreciese and blurry. I'll attach a before and after shot of exactly what I'm talking about.
View 2 Replies View Related