Lightroom :: 4.2 - Grid Pattern On RAW Files
Nov 11, 2012
URL...., except I am using LR4.2, and a different camera. (Which is why I start a new topic, but feel free to merge it to the previous one if it is best for you).
I recently had a "strobist" photoshoot with my pentax K5. I thought I was in best conditions to obtain killer definition (2 off-camera strobes, iso 200, f4 with a samyang 85mm f1,4 which seems quite good to me and .pef raw file format). But it turns out that I got a weird cross hatch pattern on my pictures :
This is a 100% crop of an unprocessed raw from lightroom. The problem is clearly visible on both eyes.. different shots from the same session, taken with a tamron 17-50mm f2,8 (still @f4) do not show any pattern ! (Same camera, same setup, only differs by the lens and distance to the subject...)
(Which was a relief because I was searching all over the web for the origin of that issue...)I tried the previous process (2010 & 2003), but the issue remain unchanged.
View 12 Replies
ADVERTISEMENT
Jun 23, 2012
I love the new Pattern Maker in CS6, but I keep running into a problem:
When I create a pattern that is NOT tiled in Grid (i.e. Brick), it usually works without any problem. But once I save and re-open the file, opening the pattern in PM again will show this message:
A clipping mask was created around the pattern tile bounds to preserve legacy pattern appearance. For best results, release the clipping mask when changing the tile size or editing art that overlaps the tile edge. I would then find that, instead of a single motif layed out in a Brick tile, I would have one complete motif in the center and four quartered motifs on the corners of one clipping box. This is tiled in a Grid pattern to emulate a Brick appearance.
So long story short, what's supposed to be a Brick tile turns into a Grid tile that's faking a Brick tile.
Is there a way to keep the simple Brick tiles?
View 5 Replies
View Related
Aug 16, 2012
Out of the blue, when I re-import Photoshopped files back into LR3, they fail to appear in Grid View. But they DO APPEAR in the 'Import' screen, grayed out, as normal. So why is LR suddenly not showing them in Grid View.Here's a screenshot of the import window that clearly shows the image that does NOT appear in Grid View. Notice that image# 2012_3_4-Edit.tif resides immediately next to it's original 2012_3_4.tif file. It obviously is part of the catalog, LR knows it's there but it does not appear in the Grid. I really need a solution to this because I've build my workflow around moving files around with LR and this is a major setback for me now.
View 14 Replies
View Related
May 5, 2012
So far the only way I have discovered is to laboriously click the checkbox on each image I want to import. It seems that one should be able to select a range with one click (e.g. holding down Shift and then clicking the last image in the range) or by using a context (right-click) menu. No dice.
View 3 Replies
View Related
Apr 11, 2012
This type of paaren appears on some of my images upon export from lightroom (usually it is most evident on black and whites), how do I eliminate it? It os not on the original or apparent while working on the image in lightroom.
View 1 Replies
View Related
Apr 23, 2012
While processing a images from this past weekend taken with the 5D Mark III... Images taken at high ISO (6400 and 12,800) with no noise reduction show a very clear criss-cross pattern across the image faintly. Once you apply about 20 on the NR slider, it will go away. I do not see this with the in-camera JPEG's or with Canon's DPP software with no NR applied to the RAW files. Is this a known issue that will be corrected for the final release of 4.1?
Here is a crop showing this happening. It is not limited to just dark or light parts of the image, but the entire thing.
[URL]
View 6 Replies
View Related
Aug 30, 2013
1. How do I add a drop shadow all around the outside of my photograph. I have been watching the tutorial from Lynda.com but it only shows how to do 2 sides, not all four. example [URL]....
2. Below is a checkboard pattern made when trying to do the drop shadow in the example from above. How do I get ride of the checkboard pattern so I can clearly see what I am doing just on a white background.
View 4 Replies
View Related
Feb 4, 2012
Multiple times, when I have been working in a file, my cursor can no longer move smoothly over the drawing space. Istead, it moves as if it was in a grid and I can not move the cursor freely. The grid view is off so that is not the problem.
View 2 Replies
View Related
Jun 26, 2013
WHAT I A TRYING TO DO: is bend a grid/mesh pattern of material to a certain radii and distance. In the attached DWG I have used either Extruded or Sweep to create the existing (latitudal?) grid but am not doing well creating the perpindicular grid at the arc drawn below the existing (lat.) grid.
I believe the dwg is a good representation of what I am attempting to do, and I am trying getting to my end result, whether it means using what i've begun or starting over, and using the "Best Practices" to achieve such.
View 7 Replies
View Related
Jan 6, 2009
I want to add one of the pattern libraries I see in the exchange. I have downloaded the .pat file -- I put it in the adobe//preset//patterns folder, then closed and opened photoshop -- no good. I saved the file elsewhere, went to "load pattern" in PHotoshop, selected it, restarted photoshop -- still no good.
How do I add these external pattern files?
View 1 Replies
View Related
Sep 30, 2013
When importing a multi-page pdf or ps file into a multi-page document, sometimes the inserted pages will all have their Document Grid layer visibility turned on, even when the existing pages in the document all have it turned off.
If I bring up the object manager, I can go through the affected pages and 'un-eye' them one page at a time. But it's a blooming nuisance, especially when importing dozens of pages at once.
View 2 Replies
View Related
Jul 19, 2013
when copying a linked model in the host file to multiple levels, why the detail lines are showing in my level from the other levels?
I have attached 2 images to show the V/G setings as well.
View 4 Replies
View Related
Jul 23, 2012
I have a user and when he's in sketch mode he trys to draw a line but it keeps on snapping to a grid. Both snap and grid setting are switched off. I can't find any settings he has different from my own set-up so I'm finding it hard to fox this problem. FYI, this user is a bit of a problem and tends to change settings without even realising he's doing it.
He's using Inventor 2012.
View 5 Replies
View Related
Feb 16, 2012
Revit has a propensity to locate a lay-in ceiling grid with a grid intersection in the center of the room. You can use the alignment tool to align the grid with a wall. But I see no way to center a tile in a room. This is often a necessity in a narrow room, to keep the lights centered. Also, installers, when not given specific instructions to the contrary, will often locate the ceiling grid to minimize narrow tiles at the wall. We need more control over the position of the grid.
View 1 Replies
View Related
Aug 15, 2012
When i pick points from the drawing using the ID command i recieve a long and meaningless coordinate which is useless to me when setting out. How i can rotate my drawing so that firstly its aligned with my grid and secondly give it the same coordinates as my site based local coordinated grid?
View 9 Replies
View Related
Apr 25, 2013
When using the perspective grid tool and type, I have a word on the right side of the grid in perspective, and I want to make a shadow of this word flat on the bottom grid. (Like how a tall building casts a shadow flat on the ground)
I tried using the shear tool to do it but it is a bit tricky getting it just right. There must be an easier way to do it within the perspective tool grid.
When I type the word and align it to the bottom grid, how do I rotate it whilst still being aligned in perspective on the bottom grid?If I try and rotate the word using the selection tool it rotates off axis so it is no longer laying flat on the bottom grid.
Words placed on the bottom grid always read from the left vanishing point - I want the word to read from the right vanishing point so it aligns with my word on the right grid wall.
View 3 Replies
View Related
Jan 18, 2012
Understanding that composite volumes are typically more accurate, I have a reason to evaluate the volume between two surfaces via a grid volume. Easily created a grid volume surface using a 50' grid (50' is large for this site, but wanted to get a feel for calculation time).
Question: Can you change the grid size without creating a new grid surface? Ultimately I woud like to explore the difference in volumes based on grid sizing without creating a long list of surfaces. One would expect that you could chage the grid spacing in surface properties, but the values are non-editable.
View 2 Replies
View Related
Nov 18, 2013
I was working on some isometric drawings for my CAD class and I can't seem to figure out how to get the grid back to the standard 2D grid view that I used to get when opening CAD. I now jusr get this dotted grid every time:
[URL]...
View 2 Replies
View Related
Sep 10, 2013
I'm looking for an option to adjust the grid size and to snap-to-grid.
For some purposes, you can find a way around this, but it is a pain when working on a project that requires perfect precision.
The topic has been brought up before, but I'm hoping to hear of any news on the possibility of implementing it. I don't assume there has been made any plugins to cater this need since earlier posts on the matter, so I'm hoping to persuade developers to implement the feature in a new version of paint.net instead.
If you need to know more specifically what I'm looking for, then it's basically what you have in Adobe Illustrator or any decent 3D modelling software you will ever come across. It would work pretty much exactly like the grid already in place, except you would not be limited to working only with individual pixels, but rather groups of pixels as you zoom further out. The grid would preferably have thicker lines every 5, 10 or 15 lines, etc. for user to position the various elements.
View 7 Replies
View Related
Aug 10, 2011
I'm using Paint.NET 3.5.8 on Windows 7 SP1 64-bit.
While editing small (16 x 16) images, I noticed that Paint.NET used a grid with a width of 2 pixels. Selection rectangles snap to this grid, as do paste operations.
How can I specify the grid width or disable this snap to grid effect altogether?
View 3 Replies
View Related
Aug 29, 2013
want to translate my vector illustrations to charts for cross stitch kits. Using the grid tool, but the lines aren't equally spaced? I have a 100cm x 100cm document at the moment, with 1 cm making a 'stitch'. I want a grid that is 100cm x 100cm, made up of 1cm x 1cm squares for simplicity. Then be able to print the design out on the grid.
View 4 Replies
View Related
Oct 18, 2011
I'm new in InDesign. How do I remove the purple grid that was already there when I made my document, WITHOUT removing ALL my grids?
View 5 Replies
View Related
Dec 29, 2011
I updated to lightroom 3.6, I no longer have grid view when importing photos.
View 8 Replies
View Related
Nov 8, 2012
In my iMac 27", it's very hard to read the filenames over the thumbs, unless you have a binocular, in the preferences I can only set the panels font size.
Any way to have large easily readable fonts in the grid ?
View 4 Replies
View Related
Jul 29, 2012
I am doing a sequence of photos and it would be extremely useful if there was a grid overlay for the photo I am working on when I am not in crop mode, the same as the thirds grid overlay you see when using the crop tool.
View 10 Replies
View Related
Feb 23, 2013
could come up with a "Lock grid to second monitor" option? I get a little peved when i'm performing some task and the grid jumps up on the main monitor. the adjustment controls are all on the main, so it goes to reason that the photo being edited should be locked the the main, and the grid be locked to the second monitor, or at least that there should be options like this. I'm using LR3.6.I don't see anything indicating that LR4 has any such option.
View 1 Replies
View Related
Feb 5, 2013
The panel in library mode where i could chose between loupe, grid, compare en survy and the thumbnailslider is gone. It was undeneath the import and export tab and over the filmstrip. Where can i find it and put it back?
View 2 Replies
View Related
Oct 4, 2012
I’m not sure where the problem lies but when I view images in Lightroom 3.6 in the Grid View they are out of focus. If I view a single image in the Loupe View it’s fine. This doesn’t happen in any other application I run. My PC has an ASUS GTX 550 Ti graphic card
View 6 Replies
View Related
Jun 25, 2012
Today I was browsing through my images library and I noticed that some of the images are dimmed. By dimmed, I mean that they appear desaturated... as though LR4 is trying to tell me something about the image... but I don't know what.
If I click on the image I can edit it. It appears normal when it is the "current image" (bright colors again). But as soon as I make another image the "current image" the other image goes back to the dimmed look.
This is only true for some images.
View 2 Replies
View Related
Jun 11, 2013
I just installed Lightroom 5, and I can't seem to select the middle grid photos. There are also times when I can't select the outer grid photos or can't scroll within the grid. It is almost like the program isn't recognizing that my cursor is hovering over the photo. This doesn't seem to be effecting the selecting of photos in the horizontal strip at the bottom of the page. I'm using a macbook pro; it has the most recent OS.
View 8 Replies
View Related
Nov 26, 2013
I was able to re-order images in the grid view just by dragging them. Now I cannot move images.
View 2 Replies
View Related
