I want to add one of the pattern libraries I see in the exchange. I have downloaded the .pat file -- I put it in the adobe//preset//patterns folder, then closed and opened photoshop -- no good. I saved the file elsewhere, went to "load pattern" in PHotoshop, selected it, restarted photoshop -- still no good.
How do I add these external pattern files?
URL...., except I am using LR4.2, and a different camera. (Which is why I start a new topic, but feel free to merge it to the previous one if it is best for you).
I recently had a "strobist" photoshoot with my pentax K5. I thought I was in best conditions to obtain killer definition (2 off-camera strobes, iso 200, f4 with a samyang 85mm f1,4 which seems quite good to me and .pef raw file format). But it turns out that I got a weird cross hatch pattern on my pictures :
This is a 100% crop of an unprocessed raw from lightroom. The problem is clearly visible on both eyes.. different shots from the same session, taken with a tamron 17-50mm f2,8 (still @f4) do not show any pattern ! (Same camera, same setup, only differs by the lens and distance to the subject...)
(Which was a relief because I was searching all over the web for the origin of that issue...)I tried the previous process (2010 & 2003), but the issue remain unchanged.
This type of paaren appears on some of my images upon export from lightroom (usually it is most evident on black and whites), how do I eliminate it? It os not on the original or apparent while working on the image in lightroom.
View 1 Replies View Relatedwhen copying a linked model in the host file to multiple levels, why the detail lines are showing in my level from the other levels?
I have attached 2 images to show the V/G setings as well.
While processing a images from this past weekend taken with the 5D Mark III... Images taken at high ISO (6400 and 12,800) with no noise reduction show a very clear criss-cross pattern across the image faintly. Once you apply about 20 on the NR slider, it will go away. I do not see this with the in-camera JPEG's or with Canon's DPP software with no NR applied to the RAW files. Is this a known issue that will be corrected for the final release of 4.1?
Here is a crop showing this happening. It is not limited to just dark or light parts of the image, but the entire thing.
[URL]
The pattern stamp is not loading the correct pattern in Photoshop CS6. Although it shows the correct image when I go to Edit - Define Pattern, once I start painting I see that is not correct.I tried resetting my preferences.
View 3 Replies View RelatedI have a pretty basic knowledge of Photoshop and I am trying to change fabrics on curtains I have managed to do this but now I am trying to use pattern maker to create a tiled pattern with a fabric so it repeats correctly I have worked out how to start this off but every time I generate a pattern and tile it it becomes distorted I have tried increasing the sample detail but this just seems to distort it more.
View 2 Replies View Relatedwhere could i find a pattern overlay/pattern of holes for a metal floor.
View 9 Replies View RelatedHow can I make a circular pattern of a single occurence of a rectangular pattern?
A shaft has a rectangular pattern of holes (along its axis) on its surface. I want to pattern the 4th occurence of this hole pattern as a circular pattern? Can I do it in Autodesk. I can not select the a specific occurance of a patterned feature to pattern it again.
I deal with creating overhead property plats and landscape plans in Designer X4. The problem I have is there aren't any good patterns to use for the architecture and landscape industry. I have dealt with PhotoShop in the past and how you could import .pat files that would tile nicely. It would be nice to be able to fill an area with a stone pattern. I found some AutoCAD files but the filter type was not supported. If nothing else, I need to know what kind of vector pattern files are supported.
View 11 Replies View RelatedAs you see in the template photo (the photo was scanned by Microsoft Security Essentials, healthy) I wanted to extrude my circle, and I made 28 pieces with circular pattern feature; now, do I have to choose all the pieces by one by to be able to choose all?
The sum of the problem: while using the Circular Pattern feature or rectangular pattern feature in Inventor, sometimes I want to extrude (join) or cut the drawings that I made (augmented) with using circular pattern feature, rectangular pattern feature. in this case do I have to choose all the augmented members one by one (for instance I make 42 augmented members), it can take a lot of time.?
How is it possible to use "Feature Pattern Select'' to make the Pattern a want in an assembly?
View 9 Replies View RelatedIs it possible to take a feature created by a pattern and reuse it to create another pattern? I have a circular part on which I have created a linear pattern (using the rectangular pattern feature) of holes, 6 in total listed as 3 ccurrences. if we number the holes 1-6, I would like to make a circular pattern based off holes 2 and 5. I have been unable to figure out how to select the individual "occurrence" related to the hole once in the pattern feature. If I create the circular pattern first and then the linear and try to suppress the others it supresses both holes in the occurrence.
View 4 Replies View RelatedI played with the feature a bit and understand how to create the patterns. Problem is when I go to fill in my 12x12 space there are seams. I have chosen different sizes in the pattern window but all show up with seams when I fill the larger space. Am I doing something wrong or is the largest size you can create with this tool seamlessly only 9x9?
View 8 Replies View RelatedWell, the title pretty much says it all... if you have a pattern set that you've already created, how do you continue to add new patterns to it while keeping those already there? I'm going to end up with a few gazillion of them because I do texture maps in Poser. So I HAVE to be able to keep adding new patterns to the Plaid Set, the Polka Dot Set, the Purple Monkey set... But I can't find this info anywhere.
View 3 Replies View RelatedI am creating an assembly with my base part being a weldment. I've added other components that mount to my base part. Now I need to add fasteners to the mating components. I have added my first fastener and now want to pattern the said fastener using the "Pattern Component" and by using the "Feature Pattern Select" option and selecting "Associated Feature Pattern". At this point I have already selected the component that I want to pattern and selected the "Associated Feature Pattern" to select my base pattern. The only problem is that I am unable to select the pattern desired.
A note on how my Weldment was constructed -The holes were created in the "machining" step of the weldment, not in the individual part before it was placed in the weldment assembly.
If I move the hole feature and its pattern to the individual part and then place it in the weldment assembly, I can then create an "Associated Feature Pattern" in my assembly file.Why can I NOT create the associated pattern when my hole features are created in the weldment assembly? Or am I missing something?
I have an assembly which I am using as a icopy component. In the assembly I have the adaptive sketch which os used for the icopy function and a part which is adaptive to the sketch. I then have the part pattern itself in the assembly. The problem is the pattern will not update when changes are made unless I edit the pattern. The pattern references parameters from the sketch so that when the sketch changes the pattern should change. It works but the pattern will not update unless i open the pattern to edit it. Is there a vb function which will force the pattern to update when a change is made? I tried the update document vb functions but no change. I will try to get a sample together that is a smaller file size so you can see what I am talking about.
View 2 Replies View RelatedI love the new Pattern Maker in CS6, but I keep running into a problem:
When I create a pattern that is NOT tiled in Grid (i.e. Brick), it usually works without any problem. But once I save and re-open the file, opening the pattern in PM again will show this message:
A clipping mask was created around the pattern tile bounds to preserve legacy pattern appearance. For best results, release the clipping mask when changing the tile size or editing art that overlaps the tile edge. I would then find that, instead of a single motif layed out in a Brick tile, I would have one complete motif in the center and four quartered motifs on the corners of one clipping box. This is tiled in a Grid pattern to emulate a Brick appearance.
So long story short, what's supposed to be a Brick tile turns into a Grid tile that's faking a Brick tile.
Is there a way to keep the simple Brick tiles?
i'm using illustrator cs5. making a pattern containing a pattern. i have some illustrations that i've put a simple polka dot pattern behind. in order for illustrator to accept it as pattern, i've been expanding the polka dot part before dragging it over to the swatches panel. however, when i do this it slows everything down tremendously and usually makes the system crash.
View 10 Replies View RelatedI am trying to export geometry found in a flat pattern sketch overlaid onto the flat pattern.
Since I am creating the output file manually I gather the flat pattern boundaries and bend center lines for output to a file.
When I add flat pattern sketch entities to the mix they do not overlay properly. What matrix would I have to push the sketch entities through to get them to the same coordinates as the flat pattern?
how do i create a pattern to use for stroking?
View 1 Replies View Relatedhow do i create a pattern for stroking?
View 1 Replies View RelatedDo you use a filter or something to create this?
View 4 Replies View Relatedhow can I create a repeat pattern in CS5 when the pattern is staggered like bricks? Also, I am wanting to print this design on fabric but the lab keeps saying that when they repeat the pattern, there is a white border that shows up around it. I've searched everywhere. Here is a sample of the design I want to repeat.
View 3 Replies View RelatedI have a background with a pattern overlay effect on it. I need to send my web developer a block of this pattern in jpg format so that he can translate it into a repeating pattern in the background of the site.
It seems that there must be an easy way to do this that I'm not getting. All I can think to do is to select a part of it on the screen and copy, but since it's already set up as a seamless pattern, I don't know where its "edges" are.
I can't create a Pattern of a selection area. When I try to create the Pattern at Edit->Define Pattern, this option isn't available. I will tell you the steps I'm taking:
->Create a new doc and use Paint Bucket Tool to paint it with Black (this is the background).
->Then I create a new layer and with the rectangular marquee tool I do a square.
->Keeping the selection I press cmd+backspace and the square becomes white.
->Keeping the selection I do a Stroke with 2px, color black and option Inside.
->Then I go to Edit to define a pattern of that square, however the Define Pattern option is gray, so I can't use it.
I finally found an image I could use to make a wood floor pattern, and have made several different colored patterns out of it that I can apply from the layer effects-pattern overlay menu. They are working nicely in my current image, but I am afraid to close PS because I fear these new patterns I have made won't be permantly saved. (I had that happen the one time I made brushes - they only were available during that PS session - next time I opened PS, they were gone from the grouping.)
View 4 Replies View RelatedI'm lookin for a tutorial on how to make a honeycomb pattern. Just like the grids and stuff but have had no luck in finding one. I had one once but I can't remember what site I got it from. If anyone knows where I can get this, please let me know ....
View 3 Replies View RelatedI've downloaded a set of camo actions, and I forgot how to use these actions as a simple pattern. So I would be able to do like a pattern overlay over an image. I've actually figured out how to do it before, but my computer crashed, and I can't remember how I did it.
View 1 Replies View Relatedif you have an wall in perspective e.g. and you want to add a texture to it.. how do you get the texture/pattern to follow the wall's perspective?
View 2 Replies View Relatedin photoshop 7, how do you make a new pattern.
i want to have a gradient of 12px by 50 px and i want to make that into a pattern so that i can have it for later use.
what do i do to make a new pattern.