Lightroom :: 5D Mark III RAW Files With 4.1RC - Cross Pattern Noise

Apr 23, 2012

While processing a images from this past weekend taken with the 5D Mark III... Images taken at high ISO (6400 and 12,800) with no noise reduction show a very clear criss-cross pattern across the image faintly. Once you apply about 20 on the NR slider, it will go away. I do not see this with the in-camera JPEG's or with Canon's DPP software with no NR applied to the RAW files. Is this a known issue that will be corrected for the final release of 4.1?
 
Here is a crop showing this happening. It is not limited to just dark or light parts of the image, but the entire thing.

[URL]

View 6 Replies


ADVERTISEMENT

Lightroom :: Export RAW Files To JPG - Photos Picks Up Noise

Aug 9, 2012

When I resize and export my RAW files to JPG in Lightroom 4, my photos with hight ISO (1600-6400) picks up noise. Same photo export without resize is ok.

View 3 Replies View Related

Lightroom :: Why Are Raw Files From Canon 5D Mark III Dim In 4.3

Jan 2, 2013

i have been able to import and move a file of jpegs but as I shoot jpeg/raw combo, the raw files were left behind in the original file. I can now bring them up, but they are dim and cannot appear to do anything w/them. I would like to move them to the file where I put the accompanying jpegs, but am having no success in finding an answer on how to do this. Nothing seems to activite to let me do this.  Along w/this, I generally tend to work straight from camera raw files, the jpegs are generally not used, thus when LR encourages me to work on the jpegs, I'm not interested. I wish to process my raw files and only move to PS6 if I need to do some more intensive work.

View 2 Replies View Related

Lightroom :: Won't Import RAW Files From Mark III

May 12, 2012

I got the chance to try out the 5d mark iii today, so I installed Lightroom 4 on my computer. After realizing the files wouldn't load correctly, I researched the issue a bit and found out about the 4.1 RC2 download. I downloaded it and ran through the installer on my computer (iMac, OSX Lion 10.7.2) and everything seemed fine, yet when I open Lightroom it still reads as version 4.0, and won't import the RAW files from the mark iii. I tried restarting, re-downloading, etc

View 4 Replies View Related

Lightroom :: What Does An Exclamation Mark On Files Mean

Jan 28, 2014

What does an exclamation mark on files mean?

View 6 Replies View Related

Lightroom :: How To Upload Raw Files From Canon 5D Mark III

Feb 20, 2013

I have just tried to upload Raw files from a Canon 5d Mark III to Lightroom 3.  The file were not recognised.  I believe there were some update issues but my Lightroom 3 is updated.  Do I need to get Lightroom 4?  I need to know urgently as I have a shoot tomorrow and will go back to my Mrk II if I can't get an update for Lightroom 3.

View 9 Replies View Related

Lightroom :: Can't Read Canon EOS 5D Mark 3 Raw Files

Apr 9, 2013

i'm using a Mac Snowleopard, have Lightroom 4.4 but cant read Canon EOS 5D Mark 3 raw files.

View 1 Replies View Related

Lightroom :: Unable To Import CR2 Files From Canon 5D Mark 11?

Feb 13, 2014

I am unable to import .CR2 files from Canon 5D Mark 11 and 1D Mark IV on Mac OS 10.9 ??

View 5 Replies View Related

Lightroom :: Cannot Delete Files Generated By Canon 5D Mark III In 4.4

Apr 13, 2013

Either in Library or Develop, when pressing the Backspace button, nothing happens. Files don't get deleted.

View 1 Replies View Related

Lightroom :: How To Import RAW Files Shot From A Canon 5D Mark III

May 31, 2012

I'm trying to import RAW files shot from a friend's Canon 5D Mark III, but have been unsuccessful.  It gives me the message "the file is from a camera which is not recognized by the raw format support in lightroom"
 
I normally import RAW files from my Canon 7D, but for some reason it's not recognizing these files.
 
How can I fix this?

View 5 Replies View Related

Lightroom :: Adobe Products Are Corrupting CR2 Files From Canon 5D Mark III

Sep 24, 2012

1. Workflow is in lightroom version 4.1  Photoshop CS5.5 is used when necessary as secondary workflow
2. Import works fine.  "preview thumbnails" appear normal.  When I CLICK on the next image it will suddenly do this ^ to the file
3. I have tried taking that EXACT file and running it through Adobe DNG converter but it comes out looking exactly like this... so it seems that lightroom is actually corrupting the file
4. I have a copy of all my raw files on another drive so I can grab those files and they do not have this problem

View 6 Replies View Related

Lightroom :: Custom White Balance From Canon 5D Mark 3 Erased From RAW Files When Developed In 4.2

Nov 5, 2012

I set custom white balance for a lot of my photos (I'm a nightclub photographer) as sometimes the colours are so saturated the image becomes unusable. Unfortunately in Lightroom 4 the photos import with the correct WB I have set but when I click on them to develop the settings are changed and the image looks completely awful. I try and adjust the image back to the way I have taken it but it never looks the same....why is Lighroom not recognising the WB settings I set within my 5D?

View 8 Replies View Related

Xara :: Cross Hatch Pattern On Colour Editor

Jul 24, 2013

ive noticed that in designer pro x9 the colour editor gets a cross hatch pattern when manipulating 3d or bitmap objets is this correct? if so, what is the purpose?

View 6 Replies View Related

AutoCad :: Developing Wrap-around Pattern From Cross Section View

Oct 29, 2013

Attached is a simple drawing of a round tube sitting on an imaginary level grade. I'm needing to develop a pattern to cut the bottom angle. I'm making a scale model and this is one of the elements. The scale is 1"= 10.66" so this round tube will be 4.5" in diameter. The angle is too gentle to cut in my horizontal band saw; can't fit it between the guides. Years ago, we used to grid out from a base line and develop a continuous curved line on flexible linoleum that when wrapped around the tube, would allow a line to be drawn on what would be my grade level line.

We would then cut the steel tube with a torch on said line. Did this for 24" to 90" diameter pipes. I need to do this for this one cut; I think I can get all the rest of the angles for the project on the saw. I'm hoping that the printable (can be done on more than one sheet if needed and taped together or something) paper pattern can be rendered easily, such as a sheet metal shop might develop a flat pattern for rolling or bending. I'm limited to legal size paper, 8.5 x 17". I'm using AC LT 2011 so I'm limited in my abilities.

View 9 Replies View Related

Lightroom :: 4.2 - Grid Pattern On RAW Files

Nov 11, 2012

URL...., except I am using LR4.2, and a different camera. (Which is why I start a new topic, but feel free to merge it to the previous one if it is best for you).
 
I recently had a "strobist" photoshoot with my pentax K5. I thought I was in best conditions to obtain killer definition (2 off-camera strobes, iso 200, f4 with a samyang 85mm f1,4 which seems quite good to me and .pef raw file format). But it turns out that I got a weird cross hatch pattern on my pictures :

This is a 100% crop of an unprocessed raw from lightroom. The problem is clearly visible on both eyes.. different shots from the same session, taken with a tamron 17-50mm f2,8 (still @f4) do not show any pattern ! (Same camera, same setup, only differs by the lens and distance to the subject...)
 
(Which was a relief because I was searching all over the web for the origin of that issue...)I tried the previous process (2010 & 2003), but the issue remain unchanged.

View 12 Replies View Related

Lightroom :: Removing Odd Pattern On Files Exported?

Apr 11, 2012

 This type of paaren appears on some of my images upon export from lightroom (usually it is most evident on black and whites), how do I eliminate it? It os not on the original or apparent while working on the image in lightroom.

View 1 Replies View Related

Photoshop :: Noise And Sharpness When View Files In Bridge?

Apr 9, 2013

I am a CS6 user, good but not advanced.  I recently upgraded from a Nikon D3 to a D4.  When viewing D4 files in Bridge after downloading the images (files) appear to contain a lot of noise and to be unsharpe; they appear sharp on the LCD screen on the camera.  I believe I have set my preferences properly.  When the files are opened in CR or CS6 the noise seems to go away and sharpness is normal; the images print up tack sharp. 

View 1 Replies View Related

Photoshop :: Convert RAW Files From 5D Mark III

Apr 18, 2012

What they are using to convert RAW files with the new Canon 5D Mark III?  This is a bummer!!

View 13 Replies View Related

Photoshop :: CS5 Won't Read Mark III Files?

Mar 28, 2012

My ps cs5 wont read my new camera files, I tried downloading a converter and the converter didn't recognize the files either.

View 12 Replies View Related

Photoshop :: Opening Canon 5D Mark III Raw Files In CS4?

Jun 16, 2013

I'm unable to find an update that will allow me to open Canon 5d Mark III raw files in CS4. I've downloaded a few updates, but nothing seems to be working.

View 6 Replies View Related

Photoshop :: CS6 Can't Open Canon 5D Mark III Raw Files

Apr 3, 2013

My Adobe Photoshop CS6 cant open Canon 5D Mark III Raw files ?

View 2 Replies View Related

Photoshop :: Can't Open Raw Files In Ver 12.1- New 5D Mark III Camera?

Sep 9, 2013

I have photoshop creative suite version 12.1 - just bought a new mark iii camera  and my raw files won't open in my photoshop version....what can i do??

View 7 Replies View Related

Photoshop :: Canon 5d Mark Iii Camera With CS3 - Cannot View Raw Files On Mac?

Sep 18, 2012

I recently bought a Canon 5d mark iii camera and am having difficulty viewing the raw files on my Mac. The Mac operating software is 10.5.8 and the mac doesnt have intel. Photoshop software is CS3.

I have looked at various plug ins but am struggling to find one that will work. Is there no option to me other than buying a new laptop with the latest photoshop or is there a workaround

View 3 Replies View Related

Lightroom :: 5.2 - Export Raw Into JPEG But It Has Noise

Nov 26, 2013

I am using Lightroom 5.2 64bit version on my windows. After I export my raw in to the jpeg it has noise. But in the develop module it hasn´t. Also it has got a little bit noise in the library, but it´s the same picture. Where is the sense?
 
Here are some pictures of that problem:
 
1. The finally edited raw picture which I want to export.
 
2. The view from the library, you can see a little bit difference on the quality compared to the view from the develop module.
 
3. The jpeg after the export.
 
4. My export settings.
 
I don´t know what to do! I´ve googled a lot but nothing found.

View 22 Replies View Related

Lightroom :: Noise Reduction Only On Shadows?

Feb 21, 2014

Having noise reduction adjustable only on shadows in camera raw & LR ?

View 3 Replies View Related

Lightroom :: Automatically Reduce Noise (mostly For RAW)?

Dec 10, 2013

For pictures taken in low light, I manually edit noise reduction levels.
 
Is there any plugin that reduces noise automatically (or semi-automatically)?
 
Long time ago, I used a separate tool that automatically reduces noises, but I'm wondering why LR still doesn't provide this feature.

View 6 Replies View Related

Lightroom :: Lost Noise Reduction Tab?

Dec 5, 2013

I clicked something in LR4 and now my noise reduction button is gone. How do I get this back?

View 3 Replies View Related

Lightroom :: Catalog Is Missing Noise

Jul 11, 2012

My workflow goes like this:I use LR3 to apply adjustments, occasionally a preset from say VSCO..While in LR I use, PHOTO > EDIT This photo in - PHOTOSHOP
 
I do my edits, ADD NOISE, SHARPEN.Then PHOTO > SAVE AS.I save the photo to my external.Here is the issue, when I re-open LR the photo is then present in my Catalog and there in LR to be viewed.... from here I export the final size for web etc and I am done
 
The photo that is now within my LR catalog is missing the NOISE I am added completely, and the SHARPENING is gone, or much less sharp then the photo I have saved in PS.

View 1 Replies View Related

Photoshop Elements :: Why Aren't CR2 RAW Files Opening In 9.0 From Canon Mark III 5D

Jan 8, 2013

I am super confused as to why my old Canon Rebel CR2 (RAW) files have always opened in Elements 9.0, but now my new camera (Canon Mark III 5D)'s RAW files are not opening?

View 5 Replies View Related

Lightroom :: Adjustment Brush Noise Reduction

Aug 22, 2013

Is there any relationship between the amount of luminance slider on the detail panel and the adjustment brush noise slider?

View 2 Replies View Related

Lightroom :: Not Enough Memory When Exporting DNG To PSD - Noise Opening It

Nov 20, 2012

I'm using LR 4.2 and trying to export to PS CS6 on my Win 7 Asus 4gb laptop with 45gb free space on my hard drive.
 
I have made substantial edits to a raw file in LR and am attempting to export it to PS for final edits (cloning out extraneous features) at 16cm and 150 ppi (less than ideal but still too large). The working file is 73 mb.
 
However, I am getting an unsufficient memory error when trying this on Tif or Psd, even Jpg. I can get it to export as original, which gives me a DNG but then I get the same lack of memory issue when trying to open it in Photoshop.
 
What I can do is open the working DNG file in Photoshop but then only some of my adjustments come through - all the noise removal I have done has gone and the image is very noisy in PS. I can also convert it to Tiff using VSO Image Resizer and open this in PS but again, the noise is there.
 
The image is to be used as the cover photo on an A4 magazine so needs to be of print-quality.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved