I've downloaded a set of camo actions, and I forgot how to use these actions as a simple pattern. So I would be able to do like a pattern overlay over an image. I've actually figured out how to do it before, but my computer crashed, and I can't remember how I did it.
View 1 Replies
The pattern stamp is not loading the correct pattern in Photoshop CS6. Although it shows the correct image when I go to Edit - Define Pattern, once I start painting I see that is not correct.I tried resetting my preferences.
View 3 Replies View RelatedI have a pretty basic knowledge of Photoshop and I am trying to change fabrics on curtains I have managed to do this but now I am trying to use pattern maker to create a tiled pattern with a fabric so it repeats correctly I have worked out how to start this off but every time I generate a pattern and tile it it becomes distorted I have tried increasing the sample detail but this just seems to distort it more.
View 2 Replies View RelatedSure wish you could manipulate the Column Offset of an Array Action with a Stretch Action.
CSHADEDESIGN|AUTOCAD LT|LT-KB|DYNAMIC BLOCKS
where could i find a pattern overlay/pattern of holes for a metal floor.
View 9 Replies View RelatedHow can I make a circular pattern of a single occurence of a rectangular pattern?
A shaft has a rectangular pattern of holes (along its axis) on its surface. I want to pattern the 4th occurence of this hole pattern as a circular pattern? Can I do it in Autodesk. I can not select the a specific occurance of a patterned feature to pattern it again.
As you see in the template photo (the photo was scanned by Microsoft Security Essentials, healthy) I wanted to extrude my circle, and I made 28 pieces with circular pattern feature; now, do I have to choose all the pieces by one by to be able to choose all?
The sum of the problem: while using the Circular Pattern feature or rectangular pattern feature in Inventor, sometimes I want to extrude (join) or cut the drawings that I made (augmented) with using circular pattern feature, rectangular pattern feature. in this case do I have to choose all the augmented members one by one (for instance I make 42 augmented members), it can take a lot of time.?
How is it possible to use "Feature Pattern Select'' to make the Pattern a want in an assembly?
View 9 Replies View RelatedIs it possible to take a feature created by a pattern and reuse it to create another pattern? I have a circular part on which I have created a linear pattern (using the rectangular pattern feature) of holes, 6 in total listed as 3 ccurrences. if we number the holes 1-6, I would like to make a circular pattern based off holes 2 and 5. I have been unable to figure out how to select the individual "occurrence" related to the hole once in the pattern feature. If I create the circular pattern first and then the linear and try to suppress the others it supresses both holes in the occurrence.
View 4 Replies View RelatedI played with the feature a bit and understand how to create the patterns. Problem is when I go to fill in my 12x12 space there are seams. I have chosen different sizes in the pattern window but all show up with seams when I fill the larger space. Am I doing something wrong or is the largest size you can create with this tool seamlessly only 9x9?
View 8 Replies View RelatedWell, the title pretty much says it all... if you have a pattern set that you've already created, how do you continue to add new patterns to it while keeping those already there? I'm going to end up with a few gazillion of them because I do texture maps in Poser. So I HAVE to be able to keep adding new patterns to the Plaid Set, the Polka Dot Set, the Purple Monkey set... But I can't find this info anywhere.
View 3 Replies View RelatedI am creating an assembly with my base part being a weldment. I've added other components that mount to my base part. Now I need to add fasteners to the mating components. I have added my first fastener and now want to pattern the said fastener using the "Pattern Component" and by using the "Feature Pattern Select" option and selecting "Associated Feature Pattern". At this point I have already selected the component that I want to pattern and selected the "Associated Feature Pattern" to select my base pattern. The only problem is that I am unable to select the pattern desired.
A note on how my Weldment was constructed -The holes were created in the "machining" step of the weldment, not in the individual part before it was placed in the weldment assembly.
If I move the hole feature and its pattern to the individual part and then place it in the weldment assembly, I can then create an "Associated Feature Pattern" in my assembly file.Why can I NOT create the associated pattern when my hole features are created in the weldment assembly? Or am I missing something?
I have an assembly which I am using as a icopy component. In the assembly I have the adaptive sketch which os used for the icopy function and a part which is adaptive to the sketch. I then have the part pattern itself in the assembly. The problem is the pattern will not update when changes are made unless I edit the pattern. The pattern references parameters from the sketch so that when the sketch changes the pattern should change. It works but the pattern will not update unless i open the pattern to edit it. Is there a vb function which will force the pattern to update when a change is made? I tried the update document vb functions but no change. I will try to get a sample together that is a smaller file size so you can see what I am talking about.
View 2 Replies View RelatedI love the new Pattern Maker in CS6, but I keep running into a problem:
When I create a pattern that is NOT tiled in Grid (i.e. Brick), it usually works without any problem. But once I save and re-open the file, opening the pattern in PM again will show this message:
A clipping mask was created around the pattern tile bounds to preserve legacy pattern appearance. For best results, release the clipping mask when changing the tile size or editing art that overlaps the tile edge. I would then find that, instead of a single motif layed out in a Brick tile, I would have one complete motif in the center and four quartered motifs on the corners of one clipping box. This is tiled in a Grid pattern to emulate a Brick appearance.
So long story short, what's supposed to be a Brick tile turns into a Grid tile that's faking a Brick tile.
Is there a way to keep the simple Brick tiles?
i am trying to build an action where the end product is a channel listing that has all the channel (R-G-B-L-C-Y-M-K (forget LAB a-b)). this will allow me to look at all the channels for contrast and subsequent extraction. i'm actually able to do this as i RECORD the action. but when i RUN the action, nothing happens.
in recording the action, i create a DUPLICATE IMAGE, then convert the new image to LAB. i then drag the "L" channel to the original image. it goes into the original image as an alpha channel which i rename to "Lightness." i then convert the duplicate image to CMYK and then one-by-one DRAG the individual channels to the original image. at the end of this process, i have all eight channels visible in the channels palette. this is what i want.
but then, when i RUN the action on a new image, the action fails to RECORD the "drag step and drop" step. the "L," "C," etc. channels are not dragged during the running of the action.
why does the "drag" step not record in the action
needs to overlay a grid over a photo and then save it as another file. In CS5.5 or earlier, no problem, but in CS6 it is not working for either of us.
The batch action (run from either Photoshop or Bridge) stops and prompts at the Save command every time no matter what format we save it in (psd, png, jpg, save for web, etc.).
I have been through the Web and the Adobe Forums and cannot find a work around for this. He cannot just hit enter everytime the popup window comes up because he has over 2700 photos to put this grid on.
i'm using illustrator cs5. making a pattern containing a pattern. i have some illustrations that i've put a simple polka dot pattern behind. in order for illustrator to accept it as pattern, i've been expanding the polka dot part before dragging it over to the swatches panel. however, when i do this it slows everything down tremendously and usually makes the system crash.
View 10 Replies View RelatedI am trying to export geometry found in a flat pattern sketch overlaid onto the flat pattern.
Since I am creating the output file manually I gather the flat pattern boundaries and bend center lines for output to a file.
When I add flat pattern sketch entities to the mix they do not overlay properly. What matrix would I have to push the sketch entities through to get them to the same coordinates as the flat pattern?
I have downloaded a free page curl action for Photoshop CS5. Is there an easy way to run it without all the steps i.e. with one click if my image size is constant?
View 3 Replies View RelatedI was running an action on several hundred images and occasionally a notice would pop up saying 'Action Not Available', but it was still working. Anyone seen this and know why?
View 9 Replies View RelatedI had an action which I used a lot. It put a horizontal and vertical guide
on the center of my canvas.
Unfortunately I lost my hdd and did not have a backup copy of this action. I have searched as good as I could bu cannot find anything.
Last year I made X-mas cards and would put a barcode on the back for a realistic look. I used to have an action that I downloaded before that did the barcodes, but I some how lost it.
View 1 Replies View RelatedHue/Saturation and Brightnesss/Contrast are steps in my Action. I always pause the action so that i can put in unique paramenters for each image. But before i get to the actual H/S or B/C action, a "New Layer" dialogue box pops up first. I never name the new layer so this is a wasted dialogue. is there a way to skip this step and pause only in the H/S or B/C step itself? I am trying to streamline my workflow by eliminating useless steps.
View 8 Replies View RelatedI can't find the trash can under the pallete to move the action I would like to delete in to.
View 4 Replies View RelatedMy Actions hot keys do not work. I'm using the creative cloud CS6 on Mac Mountain lion.
View 3 Replies View RelatedI have a photoshop file with several layers...about 100. I want to put each layers into it's own group. The name of the group must be the same as the name of the layer.
I tried creating an action to do this but it did not work right. It only works for one layer selected individually. If I select multiple layers, then it forms nested groups. How do I create this action? I am using adobe photoshop cs6 ( I think) , windows 7.
Can a Photoshop CS5 action be imported into cs6?
View 1 Replies View RelatedWith CS6 I can use FileImport to initiate a scan but when I create an action and try to run it, I get an error message 'The command "Import" is not currently available'. The action works fine with CS5.5.
I am using Silverfast and the old version works with CS5 & 6 while the new version of Silverfast works with neither. Looks like the problem lies with Silverfast.
Decided to download the trial version of CS6 and create some actions for myself. What I need to create is a 3d canvas wrap image as seen in the pic.I need to be able to control the following.
1, The size of the canvas
2, The depth of the frame
3, To have the image mirrored on the sides of the frame.
4, Shadow effect
I need to choose a color from the center of the image. Presently when I use the eyedropper, it selects a color, but when running the action on another file, it just show me the same color as when I recorded my action.
I would like it to select whatever color is situated at 50% width / 50% length of the layer. My preferences are set to percents, rulers ditto.
created an action in cs2 using ctrl-f12. When I hit ctrl-f12, I get a print option and my action does not run.
View 8 Replies View Related
