Is there any way to make multiple objects with various colors set their respective stroke color as their respective fill color and vice versa(so their fill and stroke color will be the same in result)? or do I need a special script for this?
View 3 RepliesHow does one remedy this Adobe error message? "Can't scale the objects. The requested transformation would make some objects too small to use." This one always gets me. I'll spend more time trying to find the object in question. This has happened in almost al versions, but this time it's CS5.
View 3 Replies View RelatedI've recently upgraded to CS6 and also to OS 10.8... Im working in multiple Illustrator docs using a color of 100-87-32-32. When I change objects to that color by keying it in to the color pallete, it changes. If I click off, go away and come back the color shifts to 100-82-36-29 or something similar.
Some objects retain and others shift. What gives?
I would like to know, whether is it possible to make soft blends between all objects of the person in the art I am creating. The problem is, that I want to make very smooth transition between all paths(brush strokes) in the file. I tried the blend tool, but it didn´t work good for this purose. Then I tried to blur or feather all objects, but the result wasn´t good as well. Opacity masks would be too complicated for all those strokes. Is it possible to make this work for all brush paths in the file?
View 1 Replies View RelatedI was just fooling around with it one day and I made 2 guidlines intersect (one at 0 degrees and one at 90). I added a third one at 45 and tried to center it at the intersection of the first 2. It made a tiny tiny microscopic right triangle for some reason.
Also, sometimes the center is off on either the object or on the page. Like when I rotate copies of an object around another object (like making a clock face) the copies don't go perfectly all the way around. I redo it and it works fine.
Is precision an issue in CoreDRAW?
I work in Ai to build patterns from multiple shapes and colors. At some point in the process, I use the clipping mask to crop away the parts of the build-out I don't want to see/use. Then I copy that cell/tile I want to use, and build repeated pattersn. When I bring all of these tiles together - even at 6400% - no matter how close I get the tiles to each other's edges - flush or even slightly overlapping - there is almost always a white line demarking the edges. Sometimes 3 of 4 edges appear in a centered-x/y axis, but there doesn't seem to be any rhyme or reason to it and I can not reverse engineer the cause.
I have hidden my edges. There is no stroke on a box. Even the clipping path has been checked and does not have stroke. What's going on here? This is a huge stumbling block for my business.
I have about 300+ product labels that are in Illustrator, and some of them have an incorrect rich black color swatch. What I have been doing is going through and changing the color pallette to change them manually. Essentially going to the instance of black and changing them to regular black.
Is there any sort of script that can do this? The files are in CMYK.
Otherwise I have a lot of monotonous file editing to do.
I have long used the following lisp to convert multiple single text objects into multiple mtext objects (i.e. make each text entity into separate mtext entities).
; T2M - convert individual Texts/Dtexts to individual MTexts
; modified by Xanadu - www.xanadu.cz
;
(defun C:T2M (/ ss i elist)
[Code]....
However, the mtext entity always moves position slightly (compared to the original text entity) after converting the object. better lisp that converts multiple text entities into mtext entities (which are all separate still, i.e. not joined together) without the position of the entity changing?
Coming from CS3 to CS6 How do I make the background colors in the panels (layers, swatches,etc.) white?
View 3 Replies View RelatedI'm having a lot of trouble understanding how Adobe Illustrator (CS6) manages character styles imported from different ai documents. If I create all character styles in a single .ai document and only use them in in that document, everything works as expected--colors, fonts, and typography settings are maintained in the character style, and newly added text can be quickly styled with the character style.
My trouble starts when i want to re-use those character styles in a new .ai document. From the character style menu I use the option to import the character styles from another document, and they import correctly--all of the styles work and style text as expected. But then i save & close the document and re-open it to find that the character style entries are there, but the fills and strokes are all messed up--fonts, sizes, typography settings are maintained, but styles with a blue fill are suddenly filed with black, or some other color.
This happens even if the swatches associated with the character styles are imported to the new document as well. I've read that all character styles are based off of the 'normal' character style.
Is there a way to alter the space between multiple objects without changing the objects themselves? Kind of like inflating/deflating a balloon with dots on the surface (the dots would get bigger/smaller). I've tried Transform>Move>Distance, and Effect>Distort & Transform>Transform>Move>Horizontal/Vertical, but both methods just moved all selected objects away from the origin point - no change to the space between objects.
View 3 Replies View RelatedI recently created an illustration where I need muliple colors on 1 document. I did a command + a to select all, then I went to object->live paint->make. After I added my colors I tried to change the opacity on a few of them, but the opacity for the entire document changes. Is there a way to get around this.....or do it right?
View 1 Replies View RelatedAs seen in the attached image, I want the red arc shape to cut out from the green logo it is sitting on top of, while also having the red arc dissappear and reveal the transparent bg. I have tried a bunch of different ways that I have read from these forums but none of them seem to work. Obviously I'm missing something. The green shield logo is made of multiple objects. The closest I got was the arc shape cut out from some of the objects of the green logo, but not all of them, and the arc shape didn't cut out as an arc, but rather as the original rectangle. The arc is created with a regular rectangle with arc effect.
View 3 Replies View RelatedI am using stokes to mask out a shape I want. I want to remove these strokes altogether but retain the masked shape.
So for example the below image has three circles with a white stroke to form the shapes I desire.
I am perfectly happy with this when it is on a white background but I want the strokes to be transparent rather than white so that they cannot be seen on a non-white background (see below).
Obviously if I just make the strokes transparent I lose the desired shape.
This is what I am trying to achieve (this was done in Photoshop but I want to achieve the same in Illustrator).
I made 3 circles one inside the other. each has a stroke applied. I created 2 triangles and joined them to make an hour glass shape. I placed the hour glass over the circles.
Now i am trying to use the hour glass to cut the 3 circles below. It ends up looking like a spider web. In these photos the antennae is 2 shapes and on top of the layers that hold what i have described.
I'm looking for a way to draw a single, solid object and then divide that object into multiple objects using the pen tool; not other objects.
Ex: Draw a solid cirlce, use the pen tool to draw lines over said circle (visually creating different shapes), then [do something] with both the original circle and the pen-drawn lines to actually create the new shapes/objects.
I've done this before by placing other OBJECTS over the original object and then using the divide or trim pathfinder toggles, but using other shapes (even the line tool) has its limitations.
I'm trying to replicate this image from Shutterstock with multiple objects to create this spiral vortex.
[URL] .....
I looked up tutorials like this: [URL] .... Where I can put say the hearts on one spiral.
But, the image seems to be multiple spirals in a uniform and equidistant manner. I would like to know how to go about making a "vortex" with multiple objects very similar if not the same to this fashion.
Scale Stroke and Effects Option Odd Behaviours. If multiple objects selected and they're scaled in only one dimension, Illustrator assumes this to be a scale in 2 dimensions.
Is there a work around for this?
What i'm trying to do is cut multiple circles in half (45° angle), i know that i need first "outline stroke" to make the circle lines into object (i think it's called). I have used "offset path" to get more of these lines.
I was told that if i want to cut the other half of the circle i need to use pathfinder, but everytime i use the "minus front" option, it leaves me with only on half circle while i mad 2 circles, the second circle disapppeard. How can i cut both circles in one go. (is there a way to combine these circles (not grouping))
Is there an easy way to create bleeds and trim marks for multiple objects on the same page?
For instance, I have a playing card that I've tiled across the page 6 times ( so that I can create 6 cards out of 1 page ). Each card needs it's own bleed/trim marks.
I'd also like to have printer registration marks for the page, as I have to print the card backings on another page and then glue the two pages together.
The only way I've found that I can do this is to manually create the trim marks for each object's bleed and just have them all within 1 artboard.
I tried doing it with multiple artboards within one larger artboard, but couldn't get that to work.
Is this something that just needs to be manually done?
i have a guge artwork and i need to select a small groups (around 10-100) of objects from about 4000 overlayed objects and then group'em/split-to-layers for usability (This is a human body infographics for medical institute) There IS NO way selecting them from canvas because they are overlayed, and sometimes not visible at all. in CS5 there was a feature to select multiple objects by Alt+drag selection icon on the most right in the Layers Panel. Now the duplication mode turns-on when i try to perform it. So.. Ho do i select multiple object without need to click through thousands of them? (i need drag-select)
View 3 Replies View RelatedIllustrator has the 'Transform Each' dialog, but it only allows you to scale multiple objects by specifying a percentage. Is there any way to specify the size in pixels? More specifically, imagine I have 10 rectangles on my canvas, and I want them all to be of a specific height. The rectangle position on the canvas matters, so I can't do the 'vertical align to top and then resize group height' trick - they need to be resized in place.
View 5 Replies View RelatedI want to select a few paths in the layerpanel by NOT clicken on every one. So for example I have the following structure:
Layer 01
path01
path02
path03
path04
path05
path06
path07
path08
path09
path10
And I want to activate path03 to path09 for further modifications - I would have to select every single path by clicking on it in the Target column.
Is there a faster way like selecting path03 and than holding the Shift-key and selecting path09 ? <- (This obvious solution doesn't work)
the printing press for signboard is looking for an vector of my design there are waiting for me right now. I send them the .eps format. I use pen tool for making different curves and shapes. How can I make it to a vector?
Here is the .eps file
[URL]
When I have made a logo and there's mutiple parts and I want to center it, it messes all the parts up. How do I center it while keeping the shape without combining it all? Example in photo: [URL]
View 12 Replies View RelatedI need to apply a single gradient acros a number of live paint objects but am finding it annoyingly hard to find a way. I know that normally, to apply a gradient across multiple objects, you would need to make them all into one compound path but does this apply to live paint groups in any way?? Can what i need to achieve actually be done?
View 3 Replies View RelatedWhen I use the direct selection tool to select multiple objects that also contain an image within a clipping set, occasionally the clipped image is included in the bounding box, even if it and its clipping mask are not selected. Selecting other objects includes them in the bounding box, but even after deselecting everything the bounding box around the image remains and the only way to remove it is to drag a handle (which resizes the image) and then undo the action. Obviously this is annoying and seriously interrupts workflow. I've had this issue ever since CS4.
View 10 Replies View RelatedI would like to enlarge about 400 tiny ellipse but I need them to fit in the same space and not spread out.
View 4 Replies View RelatedIs it possible to select a few objects by "sliding a mouse", on layer panel? For example, you can hold down the mouse, slide to lock multiple objects. It's fast and easy!
But if I need to select, say, only red, blue, yellow stars... I need to click the ◎ icons to select each sublayer. when I have so many objects to be selected on layer panel.
I use CS6 on Mac. Is there any secret shortcut key to select objects on layer panel by "sliding a mouse"?
I have a number of objects stacked on top of each other and I want to make a hole through them all so that when I save the finished artwork as a web image the hole will be transparent. A bit like a donut but it's not just a circle with a hole in it. It's all these other shapes piled on top of each other.
I've thought about the Eraser Tool but my hole needs to be quite precise (and there are to be four separate holes). I have looked at making a clipping mask but I can only really find tutorials that show me how to clip like making a photo vignette and I've thought about Pathfinder.
I have pale of different objects with diferent sizes, which i want to transform to 250*250, how can i do that?
View 2 Replies View Related