I have two Apple 30" Cinema displays, a 24" Cintiq and an overhead projector. My illustrator files keep on jumping from one of the Apple Displays either to the Cintiq or the projector even if they are off. Also illustrator files may open in any one of them.
View 2 RepliesSince installing Illustrator CS6 I am finding that my mouse jumps around the screen erratically while trying to draw making it almost impossible to use the program. It is particularly bad when I connect to a projector for training purposes. This doesn't happen with any previous version of Illustrator (or any other program for that matter). I know it isn't something as simple as my mouse because I tried several different ones but to no avail.
I am using Illustrator CS6 for Windows on Windows 7 and my problem is mainly on my laptop which is a Dell Vostro 1520.
Illustrator has been having a problem where anytime that I click the mouse down, it starts jumping around the screen, usually to about 2" down and 3" from the left of the screen. This is only in Illustrator though, Photoshop, and any other programs work fine.
I've tried disabling the Logitech driver too,
Running:
Pentium D 840 3.2 GHz
3 GB DDR2 667
120 GB SATA
Windows Vista Business
Adobe Creative Suite CS2
How do I use the arrow keys with the paint bucket to contain only a select portion of colors from a color group in the swatch panel? I create a color group, but when I arrow right or left, it uses a couple colors, then it jumps all over the place.
View 2 Replies View RelatedI use tabs in my document for indentation. When my cursor is at the beginning of a line, and I use the up/down keys, the cursor always jumps to the end of the first tab.
This only happens in tab-indent, not space-indent.
Is this supposed to be a "feature"? How can I make it stay at the same cursor position when navigating with arrow keys?
I'm working with 27 artboard in illustrator for one project. I would like to select the object I need to get to in my layers panel and have illustrator "jump/navigate" me to the object where it resides on the artboard. Is this possible?
View 3 Replies View RelatedWhy can't I drop a clip in the Program Monitor from the Source Monitor in Premiere? When I try to move a clip from the Source to the Program Monitor, a hand displays with the "circle with a line through it" symbol.
View 2 Replies View RelatedHow can separate Multicam Monitor from Program Monitor? I would like to put Multicam monitor on one monitor and hte Program on another.
View 2 Replies View RelatedWhat is the best way to get consistent color from one monitor to another. Is that even possible?
View 6 Replies View RelatedI have a document I created in Illustrator CS4 (Mac OSX 10.5.8) with 1/4 inch bleeds.It's a rather small document and the bleeds are very distracting (but I need them for final printing).
Is there a way to preview the document on my monitor without the bleeds? If so, how?
Is there a way, when using dual monitors, to move the whole CS6 frame to either monitor? Right now it's just cemented to my left monitor, and I want it on the right.
View 6 Replies View RelatedI can no longer move from LR to PSE, which I used to be able to do. The 'Edit in' options for photoshop under the Photo tab is greyed out, all other plug-ins are available and work fine. I have checked preferences etc but I have no luck.
View 1 Replies View Relatedwhen I created a 3D layer photoshop asked me if I want to jump to 3D view I clicked yes and selected don't ask me again (I don't know why I did), and now I don't want to jump to 3D view everytime I create a 3D layer, how can I disable that?!
View 1 Replies View RelatedThe background kground. keeps jumping from grey to a checkered background. How do i stop this?
View 11 Replies View RelatedI'm a relative noob on Corel (I have Pro X4) and video editing in general. My primary concern is the video (avi file) is jumping when I drag portions of it into the timeline. It plays fine in the library, but when I drag it into the timeline the clip will jump/skip/jerk. Is there a way to correct this? Do I have to alter some settings? I have a decent (not amazing) Toshiba L650 4GB RAM laptop that is relatively new. Surely seeing as I'm only just adding the first clips in (there is already a 10 minute sound track in place) it shouldn't be jumping already should it?
My only other question for now is is the overlay track virtually the same as the video track? I prefer using the overlay track as I can drop videos anywhere on the video as opposed to it defaulting to the start. All I do is drag the corners out to make it the same size as what it would have been in the video track.
I am using PS CS2 an Dell Dimension 9150. 2 Gig of Ram and a Nvidia Gforce 7800. I am having some strange thingws happen when I have several imags open.
If I open one image or possibly two, everythign seems fine. However, if I have several images open--maybe four or five--everytime I issue a command it seems as if teh program looks at or does something to every image that is open. I can see the title area of each window flicker in succession.
It is not happening in CS1.
Just installed upgrade to 2012 on same machine as 2011. Within the drawing area of both Model & Paper space, cursor is jumping and slow across screen.
View 5 Replies View RelatedI am running a new full version of AutoCAD 2014 on Windows 7 64 bit. It is litterally taking 5-7 seconds to zoom, switch pages, regen, or mostly anything else.
View 6 Replies View RelatedI am working on a timeline of out company's work through the past 20 years. I have the base mechanics down by making a "rough layout".
http:[url]......
Going back and forth between "years" (noted as large 1,2,3,4 text blocks) is fine by using the arrows at the bottom.
My problem is that I'd like to be able to jump to any year from any year. So I added the numbers buttons to go to the marker for that year. Here's the script I'm using to do that (in this case I'm going to the label "two"):
sym.play();
// stop the timeline at the given position (ms or label)
sym.stop('two');
The problem is that I want it to play the timeline to the number I've selected. So if I'm on "4" and click on "1" I want it to scroll through 3 and 2 to get to one.
I've noticed an odd issue when we upgraded from X4 to X5. On an identical document when we select a text block, in X5 the block "jumps" up and to the left by about 10 pixels. Below is a video of this peculiar behavior. X5 shown on the left, X4 shown on the right. Both documents are identical.
[URL]
At the beginning of the cross fade transition effect the audio drops out completely and suddenly get's loud at the end of the effect.
I'm using external USB 2 hdd and USB 3hdd
VS ProX5 and VS12
The properties for my video:
File format: mpeg2
file size-1,173.668
duration-478.378 sec
video format: mpeg-2, upper field
attributes: 24bits, 1440x1080, 16:9
frame rate: 29.970
data rate: 25000
Audio:
Audio type-mpeg audio layer 2
total samples-18, 166,967
attributes-48000hz, 16bit stereo
layer-2
bit rate-384
a. Where did they originate (camcorder, internet, TV card etc) Camcorders-SonyFX1 HDV and Canon XHA1 HDV
b. How did they get onto your hard drive (download, firewire, USB cable etc.) Firewire
Project Properties-
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
Audio data rate: 256 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)
We are running AutoCAD 2011 and 2011LT on Windows 7 with 12gb of ram and a NVIDIA Quadro 4000 video card.
The problem did not happen to often when we were on XP, but now, whenever we're in a command, the screen jumps as if snaps were turned on with 1/2" spacing. We've tried upgrading the drivers and graphics cards as well as installed all updates I could find. We make sure drawings are purged and audited and Layer manager IS NOT kept open.
My image is jumping each time I try to use the lasso tool. When I complete the selection, I find I have missed (indented) a whole area from when the jump occurred.
View 3 Replies View RelatedI understand that backuping my catalog will save all my adjustments in Lightroom. However, I jump over to edit externally in Photoshop often. I understand that to create a Tiff file next to my original file. However, isn't just backing up the catalog missing the Tiff file now in the backup?
View 2 Replies View RelatedI'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
The manufacturer of the flip camera is suggesting that since the footage can play fine with the camera program (Arcsoft Media Impression) the problem seems to be related to the player codec on my computer. They suggested that I download the latest K-Lite Codec Pack to see if that would resolve the problem.
I'm using the trial version of CVS X4 and have been impressed so far, but have come into a problem that I have seen others post here, but it's not 100% identical to my problem.
I'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
I've posted a 1 minute sample on Youtube at [URL] ...... You'll notice while viewing an opening pan of the Welcome sign and footage of the columns the issue I'm inquiring about. I find it very strange that this especially noticeable when a scene is being panned.
Screen Shot CVS Jumping.jpg (39.95 KiB) Viewed 615 times
It seems difficult to make small on screen movements without the tool jumping. Would it be better use a low DPI mouse or a high DPI one? Wouldn't you get better control with a low DPI one?
View 2 Replies View RelatedI made a post in the autoCAD LT section, URL...And to save you the jump (though there's none of the fixes I've tried)I'm having issues with annotative symbols jumping around the page. As far as I can tell, it happens on certain symbols when I add a second(or more) annotative scale to that symbol. I can reset the symbols so that they're all aligned and sitting 'on top' of each other, but when I switch to different viewports/plot or save/open the drawing again they've reverted to the position they jump too. In the past I thought it might be something to do with where the basepoint was within the block, but having changed that, I still had the problem.
Both the blocks I've had it happen with are reasonably simple (one's an 'Auto Air Valve' symbol with a mask behind the lines, the other is a custom 'Section line' symbol although that also has some properties to allow me to extend the section line) objects. With the section line symbol I mirror it to get the second half, which is the half it's having the problem on. I wouldn't expect mirroring an object would do it though. The odd thing is, it's only happened in some drawings that I've done, and only with some symbols (which were all created at a similar time, so should have the same issues?),
Is there anyway to prevent a corridor from jumping across large distances as in the attached screen shot? There are no targets in any of these regions.
View 1 Replies View RelatedI have just swapped from PC to Mac and in the process upgraded from LR 3 to LR 4. I have always had some minor issues with the spot removal tool occassionally jamming up or not working smoothly and taking a long time in LR3 on PC, but so far using the tool in LR 4 on Mac has been painful. It is like it is slow to load, and then the cursor/spot removal circle just dissapears or freezes? I want to be able to fix minor blemishes etc quickly in LR instead of having to go to PS
View 2 Replies View RelatedI have created the following simple animation:
http:[url].....
the files are at: http:[url]....
I want the background to loop seamlessly, I have created the illustration so it will join ok at either end I just cant figure out how to do the Animation 'looping' element so its nice and smooth without any visual jumping? or without it jumping back to the beginning -