I am using PS CS2 an Dell Dimension 9150. 2 Gig of Ram and a Nvidia Gforce 7800. I am having some strange thingws happen when I have several imags open.
If I open one image or possibly two, everythign seems fine. However, if I have several images open--maybe four or five--everytime I issue a command it seems as if teh program looks at or does something to every image that is open. I can see the title area of each window flicker in succession.
I'm creating a web page in Dreamweaver. I grab the photo I want to use for a header; & open it in Photoshop (CS3). I resize the photo to 7" wide...@ 72ppi, which will be the perfect width for the design I have in mind. I configure the resized photo into Dreamweaver; & it looks small...about 5-1/2" in width. I think...OK...maybe it's something to do w/ Dreamweaver's default resolution...so I preview the page in Internet Explorer...knowing the default browser resolution is 72ppi.
It's still 5-1/2" wide in IE.
Photoshop is telling me it's 7" wide, but it's 5-1/2" wide everywhere else.
I think I wore my CS2 out. | It's doing all sorts of wierd little things, click on images in Bridge and the images open twice, go to click on HELP to see what I need to do to fix and the HELP throws me out an error, It's telling me I don't have enough ram to save a picture, (when I know I have plenty!)
I have heard that resetting preferences is always a first step, but how do I do that again in CS2?
I read in a search here to find the preferences file in adobe through Explore, but I can't for the life of me find a preferences folder.
For some reason, recently, when i paint in pshop CS2, every 10 or 12 strokes, my computer lags and I have to sit here and wait for it to catch up, and draw the last couple of strokes I made. It is REALLY irritating when painting for he obvious reason that it delays creativity. I have a dual 2 ghz G5 with 7 gb of RAM AND 550 GB of space, so it CAN'T be my comp. Any Ideas why it's laging so badly.
Also, in the last couple of weeks, for some reason, pshop is redrawing my pixels on the screen, making it very difficult to paint. Basically, when I paint, or drag the screen around, it keep residual pixels from my last angle, and they don't move until I drag my brush through them, making it impossible to paint accurately. I have to zoom out and then back in to clear it.
After updating to GIMP2.8.4 I am seeing a constant problem with the canvas not updating after any change unless I move the cursor out of the image area. It starts updating immediately but if I move the cursor back it stops even if it hasn't finished redrawing. This is not just for image changes; the selection outline does not update either unless I move the cursor out of the image area! There's another problem with the selection outline - sometimes it just stops displaying, period, and I ave to use quick mask or save and close GIMP.
When I first use the mouse to open a menu (Editor mode) it takes a while for redrawing the menu rectangle. Not a great deal because this only happens the first time I open a menu after launching the application. On the other hand, X3 seems to redraw menus just fine and fast.
I would like to be able to have the screen refresh periodically to show the new objects I have added as a command method proceeds to execute. I am hoping to be able to achieve a kind of simple animation by doing this, and also to show progress while a computationally intensive operation is under way. Is there a way that I can do this?
I have tried using AcadApp.DocumentManager.MdiActiveDocument..Editor.Regen() and also .Editor.UpdateScreen(), but it only seems to work once and not multiple times. Do I have to commit the transaction and then .
I have to redraw 19th century raster maps that cannot be vectorized automatically.
The borders of the parcels are heavily curved.
I insert the raster map and start to trace/draw on a new layer.
1. Now, if I want to draw a second parcel that has a common curvy border with a first parcel how do I best trace the common border? What I would like is that the vertices along the common border are all displayed so I could just click them rapidly to draw the common border of the second parcel. However I cannot find a way to display all vertices. Is there a solution for this?
2. For drawing a new parcel alongside multiple existing parcels, a beter/faster option would be that I just click the vertices on junctions of the common border and the software would automatically trace the line between the junctions, create all vertices and snap them to the existing vertices on the common border of the existing parcel.
when I created a 3D layer photoshop asked me if I want to jump to 3D view I clicked yes and selected don't ask me again (I don't know why I did), and now I don't want to jump to 3D view everytime I create a 3D layer, how can I disable that?!
Illustrator has been having a problem where anytime that I click the mouse down, it starts jumping around the screen, usually to about 2" down and 3" from the left of the screen. This is only in Illustrator though, Photoshop, and any other programs work fine.
I've tried disabling the Logitech driver too,
Running: Pentium D 840 3.2 GHz 3 GB DDR2 667 120 GB SATA Windows Vista Business Adobe Creative Suite CS2
My image is jumping each time I try to use the lasso tool. When I complete the selection, I find I have missed (indented) a whole area from when the jump occurred.
I understand that backuping my catalog will save all my adjustments in Lightroom. However, I jump over to edit externally in Photoshop often. I understand that to create a Tiff file next to my original file. However, isn't just backing up the catalog missing the Tiff file now in the backup?
It seems difficult to make small on screen movements without the tool jumping. Would it be better use a low DPI mouse or a high DPI one? Wouldn't you get better control with a low DPI one?
Every time I re-open a file containing a 3D object placed in the document, if I do a minor change (texture, color or position) the 3d object jump to his imported place in the document and lost the position and direction I placed it.
I can no longer move from LR to PSE, which I used to be able to do. The 'Edit in' options for photoshop under the Photo tab is greyed out, all other plug-ins are available and work fine. I have checked preferences etc but I have no luck.
'm using a Mac with the latest version of the Creative Cloud. I've been stuck with the sillest problem ever with the Character Tool.It started with the size tool. If I set it to 200px and press enter, it will suddently jump to 11443.91 px. It does the same thing if I use the slider (clicking the tT and sliding up and down), it will show me the right number, but the second I let it go, it jumps to a complete random number. If I put it at 300 px, it goes to 11443.91px ... again.Now, all the other character tools are doing the exact same thing. The line-height, the tracking, everything.
Here's all my system info if you need it: Adobe Photoshop Version: 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00) x64 Operating System: Mac OS 10.8.4 System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
I have two Apple 30" Cinema displays, a 24" Cintiq and an overhead projector. My illustrator files keep on jumping from one of the Apple Displays either to the Cintiq or the projector even if they are off. Also illustrator files may open in any one of them.
Since installing Illustrator CS6 I am finding that my mouse jumps around the screen erratically while trying to draw making it almost impossible to use the program. It is particularly bad when I connect to a projector for training purposes. This doesn't happen with any previous version of Illustrator (or any other program for that matter). I know it isn't something as simple as my mouse because I tried several different ones but to no avail.
I am using Illustrator CS6 for Windows on Windows 7 and my problem is mainly on my laptop which is a Dell Vostro 1520.
I'm a relative noob on Corel (I have Pro X4) and video editing in general. My primary concern is the video (avi file) is jumping when I drag portions of it into the timeline. It plays fine in the library, but when I drag it into the timeline the clip will jump/skip/jerk. Is there a way to correct this? Do I have to alter some settings? I have a decent (not amazing) Toshiba L650 4GB RAM laptop that is relatively new. Surely seeing as I'm only just adding the first clips in (there is already a 10 minute sound track in place) it shouldn't be jumping already should it?
My only other question for now is is the overlay track virtually the same as the video track? I prefer using the overlay track as I can drop videos anywhere on the video as opposed to it defaulting to the start. All I do is drag the corners out to make it the same size as what it would have been in the video track.
I am running a new full version of AutoCAD 2014 on Windows 7 64 bit. It is litterally taking 5-7 seconds to zoom, switch pages, regen, or mostly anything else.
How do I use the arrow keys with the paint bucket to contain only a select portion of colors from a color group in the swatch panel? I create a color group, but when I arrow right or left, it uses a couple colors, then it jumps all over the place.
I am working on a timeline of out company's work through the past 20 years. I have the base mechanics down by making a "rough layout".
http:[url]......
Going back and forth between "years" (noted as large 1,2,3,4 text blocks) is fine by using the arrows at the bottom.
My problem is that I'd like to be able to jump to any year from any year. So I added the numbers buttons to go to the marker for that year. Here's the script I'm using to do that (in this case I'm going to the label "two"):
sym.play(); // stop the timeline at the given position (ms or label) sym.stop('two');
The problem is that I want it to play the timeline to the number I've selected. So if I'm on "4" and click on "1" I want it to scroll through 3 and 2 to get to one.
I've noticed an odd issue when we upgraded from X4 to X5. On an identical document when we select a text block, in X5 the block "jumps" up and to the left by about 10 pixels. Below is a video of this peculiar behavior. X5 shown on the left, X4 shown on the right. Both documents are identical.
At the beginning of the cross fade transition effect the audio drops out completely and suddenly get's loud at the end of the effect.
I'm using external USB 2 hdd and USB 3hdd VS ProX5 and VS12
The properties for my video: File format: mpeg2 file size-1,173.668 duration-478.378 sec
video format: mpeg-2, upper field attributes: 24bits, 1440x1080, 16:9 frame rate: 29.970 data rate: 25000
Audio: Audio type-mpeg audio layer 2 total samples-18, 166,967 attributes-48000hz, 16bit stereo layer-2 bit rate-384
a. Where did they originate (camcorder, internet, TV card etc) Camcorders-SonyFX1 HDV and Canon XHA1 HDV b. How did they get onto your hard drive (download, firewire, USB cable etc.) Firewire
Project Properties- NTSC drop frame (29.97 fps) MPEG files 24 bits, 720 x 480, 29.97 fps Upper Field First (DVD-NTSC), 16:9 Video data rate: Variable (Max. 8000 kbps) Audio data rate: 256 kbps Dolby Digital Audio, 48 KHz, 2/0(L,R)
We are running AutoCAD 2011 and 2011LT on Windows 7 with 12gb of ram and a NVIDIA Quadro 4000 video card.
The problem did not happen to often when we were on XP, but now, whenever we're in a command, the screen jumps as if snaps were turned on with 1/2" spacing. We've tried upgrading the drivers and graphics cards as well as installed all updates I could find. We make sure drawings are purged and audited and Layer manager IS NOT kept open.
I'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
The manufacturer of the flip camera is suggesting that since the footage can play fine with the camera program (Arcsoft Media Impression) the problem seems to be related to the player codec on my computer. They suggested that I download the latest K-Lite Codec Pack to see if that would resolve the problem.
I'm using the trial version of CVS X4 and have been impressed so far, but have come into a problem that I have seen others post here, but it's not 100% identical to my problem.
I'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
I've posted a 1 minute sample on Youtube at [URL] ...... You'll notice while viewing an opening pan of the Welcome sign and footage of the columns the issue I'm inquiring about. I find it very strange that this especially noticeable when a scene is being panned.
Screen Shot CVS Jumping.jpg (39.95 KiB) Viewed 615 times
I made a post in the autoCAD LT section, URL...And to save you the jump (though there's none of the fixes I've tried)I'm having issues with annotative symbols jumping around the page. As far as I can tell, it happens on certain symbols when I add a second(or more) annotative scale to that symbol. I can reset the symbols so that they're all aligned and sitting 'on top' of each other, but when I switch to different viewports/plot or save/open the drawing again they've reverted to the position they jump too. In the past I thought it might be something to do with where the basepoint was within the block, but having changed that, I still had the problem.
Both the blocks I've had it happen with are reasonably simple (one's an 'Auto Air Valve' symbol with a mask behind the lines, the other is a custom 'Section line' symbol although that also has some properties to allow me to extend the section line) objects. With the section line symbol I mirror it to get the second half, which is the half it's having the problem on. I wouldn't expect mirroring an object would do it though. The odd thing is, it's only happened in some drawings that I've done, and only with some symbols (which were all created at a similar time, so should have the same issues?),
Is there anyway to prevent a corridor from jumping across large distances as in the attached screen shot? There are no targets in any of these regions.
