Illustrator :: UN-STRETCH Font Automatically To Its Original Properties?
Oct 24, 2013
My ai doc has a stretched font and when i subsequently added indepented words/phrases in different locations, they are all stretched as well. I only wanted the one stretch, so I will have to go in manually and will never get them exact, or just start fresh, so I wondered if there is a way to restore them to their original properties. Also is there a way to avoid what I did? It also stays in "stretch mode" when I typed in a different font, which is how I noticed because the o's are supposed to be almost a perfect circle and they were ovals, so it was obvious, although the first font wasn't to me.
View 2 Replies
ADVERTISEMENT
Jun 6, 2010
I am modifying an existing logo for a company. The font used in the original is Helvetica Bold.For ease of explanation, we can assume that the company has not licensed the font at all.
If I purchase Helvetica Bold from linotype: URL....
and make a logo consisting of an logo mark and logotype "IHGMISAHIC, CPL" (scrambled) using the newly purchased Helvetica Bold font.Register the logo to be used on all company stationery and signage, etc.
View 6 Replies
View Related
Mar 24, 2011
how to auto fit overset text in a fixed text frame?
I import many languages into fixed text frames and it is a pain to keep resizing or scaling manually.
As of yet I've been unable to source any javascript or applescript that can do it. The closest has been "JET_AutoFitVertical.jsx" but this resizes the text frames.
View 4 Replies
View Related
May 30, 2012
I had posted in another thread about wanting to clean up a signature and make it look more font like. I tried that and it seemed to be pretty difficult due to the amount of random in a hand written signature.
So I think I'd like to approach this from the other direction. I have a font I like but I don't want it to look like the font (way too common). Is there a way to alter the font (not the entire font set or even to create a new font but just for a one word Logo)?
I'd ideally like to connect two of the letters and also modify the shapes of the letters just a bit.
View 4 Replies
View Related
Aug 22, 2012
Do masks automatically stretch to the size of the target image?
In PSP8 I opened my target, 1615 x 1066 px:
Then, following the instructions, I opened this circular mask, 450 x 450 px:
But after completing the procedure my result looks like this, with an elliptical 'see through' area instead of a circle:
If this is by design, how would I get the circular effect I want? There are simpler ways of doing it for an all black/white mask.
View 7 Replies
View Related
Jan 30, 2014
Why won't LR5 save my original RAW imports from D7100. I can import them and process them but the originals are then lost. What am I doing wrong? With every other camera the original RAW image is saved in the library.
View 11 Replies
View Related
Jul 17, 2011
I have a HD mov file. When I drag it into my timeline I don't get a message to match the project properties to the file type even with the correct preference. I understand that with the mov file type this doesn't work in X4 anyway. Anyway, after a bit of trimming I want to create a file with exactly the same specifications as the original.
I obviously cant use same as project settings option. For some reason I do not have the same as first clip option either. So how do I tell X4 to keep the original file properties when creating a new file?
View 5 Replies
View Related
Dec 8, 2010
I've created a table (a door schedule for example).The data cell type properties is "general". The door # is "001". When I type this in, it switches to just "1" and the type is swiched to "whole number." Same for another cell with a number in it, it switches the cell type on me and I don't want what it switches to. Every time I try to switch it back it doesn't do anything.
How do I stop it from automatically switching, or at very least let me override?
View 4 Replies
View Related
Jul 1, 2011
I like to keep the properties of my drawing the same as those of my model. Currently I must remember to hit the "updat copied properties" button in the drawing to discard any old drawing properties and replace them with the properties from the model.
Is there any way to automate this task (perhaps on saving the drawing?) I presume an iLogic rule could be created in the drawing template, just not sure how to go about it.
View 7 Replies
View Related
Feb 13, 2012
I'm using C5 Extended and have been using PS for years and suddenly I'm seeing something I haven't encountered before. My font sizes are being reduced "to the closest integer" which goes to 624.14 pt. My image is only 1000px x 150px so I'm not sure where the measurement discrepancy is happening.
I noticed it first when I made a copy of a box of text and then tried to drag the text copy.
View 2 Replies
View Related
Jan 22, 2013
I saw it once & it appeared (by accident) on the left side tool box. All of the properties of the text - i.e. size etc was shown on the tool box. How do I make that happen again ? I am brand new to Gimp.
View 3 Replies
View Related
Jul 15, 2013
Sometimes Photoshop automatically change my font sizes to uneven numbers. For instance 12 pt changes to 11,98 pt. Why and what could be done to avoid this? Also XY positions of objects in Illustrator get changed to sligtly different numbers like 9,98 px.
View 5 Replies
View Related
Dec 11, 2012
I installed ACAD LT 2011 in my new HP Win7 computer, and the font in the Layer Properties Manager box is so large that it is unreadable. I have attached a file showing a 'print screen'. I need directions on how to put the text back to normal size. I had no problems with this program in my old Dell computer.
View 3 Replies
View Related
Mar 15, 2012
Voorstel spantenlijn.dwg
I have created a dynamic block. Herein I placed stretch actions parameter set to strecht parts including anotative text.
Now the block seems to work fine.
- When I am in modelspace and I change the annotation scale the text is changed correct
- When I am in modelspace and I change the stretch value of the dynamic block everything goes fine.
But when I am in modelspace and I change the stretch value in one of the annotiaton scales and then switch to another scale my text is changed annotativly (this is what I want) but the stretch value is set back to default (which should be at the changed value).
View 4 Replies
View Related
Sep 28, 2011
I am wondering if there is a way to put the old save method back into the new gimp 2.7.3. I would like to be able to export to a new file format and automatically be using that file instead of the original file that I have just opened. If there is a plugin like this that would be great.
View 2 Replies
View Related
Sep 24, 2013
After opening a file from another designer, this Chinese font has taken over my "omens – regular" font file. Anytime I use it, it converts to this font and each time I need to change a font weight, I must do it manually. As you can imagine, I use our company font all day so this slows me down quite a bit. Have you heard of this? It seems like some sort of font virus. I've researched removing it, yet can't seem to find the original font file to get rid of, which is even weirder."
We tried moving the font family to the trash, emptying the trash, rebooting the machine, and re-adding the font family and it still is happening.
View 2 Replies
View Related
Apr 12, 2013
Is there a way to specify a given system font that should be substituted for a given missing font? For example, the document I'm working with contains CourierStd and CourierStd-Bold which are not installed on my system. I would like to set Illustrator so that any time a document that contains these fonts is opened, Courier New and Courier New Bold are substituted automatically.
View 3 Replies
View Related
Nov 29, 2013
An eps file opens without any problem with the preview as .pdf on Mac OS 10.7.5In illustrator when I open the same file, the main font is not recognized and no warning said the font is not available.
View 7 Replies
View Related
Jan 27, 2014
I am using Illustrator and I want to be able to select the arm or leg of a line drawing cartoon character and reposition it to create a new position without having to redraw the arm or leg.
I know you can do this in After Effects with the puppet tool. Is there a similar function in Illustrator?
View 2 Replies
View Related
Feb 27, 2014
I think stretch is the right word I'm looking for... I figured out how to outline the text, and I ungrouped the outline. However if I stretch the whole letter, the left "leg" of the 'R' goes down as well. I just want to stretch the right "leg" of the 'R' so that it reaches the bottom of the word Agency.
View 3 Replies
View Related
Mar 4, 2014
I'm looking for the best way to stretch the P in the word Postgraduate for a project.
The font is News705 BT.I need to make the P much longer and then extend it under the word - as in the image below.
View 3 Replies
View Related
Jun 28, 2013
I have a complex object (a plot with a bunch of text labels, etc.), and I want to stretch it horizontally or vertically without distorting text. I have an option to scale or not to scale strokes,. However, whatever I select here, the text always ends up distorted.
Is there a way to stretch it so that the text retains it's original shape?
View 4 Replies
View Related
Sep 11, 2012
When I stretch an object to the right using the right hand side handles, the left side of the object also moves slightly to the right. How can I stop this from happening and keep have the left side stay perfectly in place. Is there anything in the settings I can change?
View 4 Replies
View Related
Jul 25, 2012
How to get the original ppi of a raster art?
View 1 Replies
View Related
Jan 5, 2013
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies
View Related
Nov 1, 2013
I opened up a file to use the same size to make another project...i saved the project instead of saving as to save the project as a different document. therefore the old project i made on that document disappeared i was hoping that there was a history panel or something i can go back to what the document was when i opened it..
I still have the document opened - never closed it since i opened it to do some other project.
- In photoshop i can just to history and clikc on the thumbnail to reset everything as it was before. I don't want to loose my layers from that older project.
View 2 Replies
View Related
Feb 26, 2011
I want to use the "edit original" function inside illustrator, so my picture will open in photoshop, and the changes I make there will be saved in Illustrator. But when I choose edit original it opens paint - how do I change this? And yes I have checked the link-box when selecting the image. I have windows 7 if it matters.
View 8 Replies
View Related
Jan 13, 2014
When you select the option to apply any changes & overwrite your original photo does the program attempt to try to a default setting to keep the picture approximately the same size as it was before? (assuming that you haven't cropped it) If it doesn't default to a size automatically can is there an option to do so?
View 4 Replies
View Related
Feb 21, 2014
Is there a way to convert a pattern back to it's original form? I know that you can edit a pattern, once it has been created, but what about reverting back to the starting point?
I have a student who created a rather complex drawing and then converted it to a pattern, the design does not work well, because it is too elaborate, he has three different art pieces. A record, a jukebox and a piano. These are all great illustrations on their own, but do not make a good pattern. Is there a way to undo the pattern?
View 4 Replies
View Related
Jan 17, 2013
Every time I open an image in Illustrator, it is 3-times smaller than the original image started out. For example:
An image starting out with the dimensions:
Width: 5.35 inches / 1070 px / 385.2 pt
Height: 5.24 inches / 1048 px / 377.3 pt
Once it is opened up in Illustrator the dimensions are contorted to:
Width: 1.93 inches / 386 px / 139 pt
Height: 1.89 inches / 378 px / 136.1 pt
And this is just from opening the image. I have not done anything as of yet. All I have to look at is a distorted pixelated mess. Why Illustrator is doing this to my image files and how do I get it to open image files with the proper dimensions?
View 1 Replies
View Related
Sep 29, 2013
i click on the brush and change its color and or size then, when I go to paint it goes back to previous settings. (after that I can change its setting and it will work, but I always have to make a mark with the settings I don't want before I can change it to desired settings)
View 1 Replies
View Related
