I am trying to close alert at once but the loop continues the alert, how can I stop the alert at once
var doc = app.activeDocument var layersToTargetNameArray = ["Background", "Artwork", "diecut", "size", "sign off panel"]; for (var i = 0, il = doc.layers.length; i < il; i++) { var curLayer = doc.layers[i];
Using PS CS3, I opened a few JPG images taken with a Nikon D100 a few years ago. I copy/pasted one image on top of another, flattened it and saved as a PSD. Later on, when I double-click on the PSD, PS opens and I get a script alert: "Nikon Corp, Nikon D100, was used to shoot this file!"
The original JPEGs were of course shot with the D100, but the PSD certainly was not.
if I leave PS open, close the file and double-click it again, the same message does not appear. But if I close PS and then repeat the above, the message re-appears. Which leaves me with two questions:
I've a very strong virus auto alert message in my Autocad 2007 -2011, i try to re installed the product and clear the registry editor as well as change all the AutoCad version, i also try to scan with Kaspersky and Avast but none of them can catch the virus. Unfortunately the auto alert message still keep alert while i'm opening the autocad design file,
I am facing problem in my AutoCAD2013 (Ultimate version) -
1.While opening any file an alert message is appearing on the screen, for closing the same I Have to use ( X) close many times. 2 After opening the file every time I have to set the AUTOcad default setting once again, it is taking too much time,
I am not in a position to format my PC now, The snap shot is attached herewith.
I'm try to automate the importing of the Varaible and datasets into my graphs via Scripting, but the ImportVaraibles() function doesn't seem to work. Here is my Script, mostly copied from the example script provided with Illustrator (CS5). And, this works manually, using the file names in the script, via Load Variable Library
Set appRef = CreateObject(strIllistratorVersion)
'Open the file and import the datasets Set docRef = appRef.Open(strTemplate & "200-500.ai") 'docRef.Datasets.RemoveAll docRef.Variables("Yearbook").Delete
Here is the problem, after I delete the previous library, then this next line, right from the example, does nothing The script then exits with 'No Datasets in this document'
docRef.ImportVariables (strXMLFolder & "Lumber_200-500.xml") 'appRef.DoJavaScript "alert('Template:" & strTemplate & strRange & ".ai | XML file:" & strXMLFolder & "" & objFile.Name & "^')" If (appRef.Documents.Count > 0) Then Set docRef = appRef.Documents(1)
[Code]....
If I remove that delete line, the script runs, but just uses whatever Variables I had last loaded, not the XML file.
It's simply not loading. What do I need to do to get it to load?
I'm having a problem with Illustrator. I'm running CS6 on my macbook pro retina (OS X 10.8.2)
At any random point in a piece of work, new effects I add stop showing up. This can be anything from warping a shape, to re-ordering items in the appearance panel. When this happens I can toggle visibility, or even delete elements, but they still remain visible. The piece of work stays live on the art board, but stuck, despite any changes I have made showing up in the appearance menu. If I save the work, shut down Illustrator and then open it again the changes I have made appear, but my artwork freezes again after only a couple of changes. This is making working impossible.
Here you can see I've actually switched off visibility for the three elements in this graphic, and added a warp to the blue rectangle, but nothing has changed on the work area:
I'm designing a map in Illustrator CS5. Any way to merge 2 paths (roads) which have text attached, so they seamlessly blend together. I've tried using a compound path but this doesn't work with text added. I need to be able to easily change the roads direction/shape without having to use different layers.
Is there any way to prevent Illustrator from adding numbers to the end of exported files? It's really annoying because I end up with a bunch of extra files and only need the single exported version that I overwrite when making changes to the AI file. It's also annoying when I have an exported file linked in a Premiere or Indesign file. I was last using CS3 wich didn't have this 'feature.'
I've just installed the Kerio firewall that also alerts when one application starts another application. When I start PS, the firewall tells me PS is trying to start rundll32.
I'm having trouble with the alert windows that should be popping up. The problem is that I can't see them on my desktop. For example, I click on file>new and then a box should pop up but I can't see it. If I press enter it creates the new image but if I click in the photoshop window then it won't let me do anything else because the other window above it is still open.
I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6. I'm operating on windows 7 64 bit. In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them. Photoshop CS6 opens the files from Bridge and applies the actions,
but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on. The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them. I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close.
I just switched from the GIMP and I am not accustomed to some of the ways in Photoshop. I wanted to ask how to change a layers size only. I don't want to change my whole images size, I just want a part of the image changed. I've been using Image - Image Size to do this,
Is there a way to temporarily turn off the sick constraint alert? The message popping up every time I fix one of hundreds of sick constraints wastes a lot of time. I tried searching this out on here but the thread list was populated entirely by ADesk FAQ links that had nothing to do with the issue.
When I try to change someting on an Illistrator document, It stops and says "not responding". I have rmoved the entire program and reloaded it, with no change.
I just downloaded Illustrator CC few days I go and everythime I try to open it I'm getting an error message: "Adobe Illustrator had detected some problems associated with the registration that have to be solved in order for Illustrator to work correctly. To solve it click with the roght botton of you mouse on Illustrator.exe and select adminitrator...
I don't know how to do it. Where is located Illustrator.exe in my computer?
When in the attribute editor, after you edit an attribute then click "select blocks", to choose a new block to edit, an alert appears telling you that an attribute in the block has changes and asks if you want to save these changes. I ALWAYS want to save these changes...
Therefore, my question is, is there a way to turn that alert off or suppress it?
I'm new to the programming thing, and this one has me stumped. We have a problem with people accidently dragging xrefs. The simple solution would be to put all of the xrefs on a locked layer, but I was vetoed on this suggestion. I've been trying to figure out if I can write a lisp that will do one of the following: Give an alert if an xref is moved.Not allow an xref to be moved.Tell the user when they open a drawing that an xref is not at 0,0,0 insertion point.
I have an ai file that I can not save with out getting the File I/O error message. One person suggested that this file may be corrupted since I've been bouncing back and forth between 2 different Illustrator programs. I use CS-4 at work, save as CS-3 format then continue working on it at home. I tried copying each layer to a new fresh doc. but still get the error code. Is there a way to fix this file? Both back-up files I have behave the same way.
I got “Insufficient Memory” error messages in working on the job needed large files ( > 100MB) with AI 5.5 in office with below #1 PC spec. Error message starts to happen after working 15min to 1 hour depends on the file. I need to restart computer in each “Insufficient Memory” error message pop-up (otherwise the messages will continue to pop-up). Sometimes the file can’t be saved after the error message occurred.
I have never encountered this memory issue at my home with below #2 Mac spec.#1 PC spec looks better than #2 Mac spec. Why PC can’t perform like Mac does? Do you have any solution to fix the “insufficient Memory” issue in #1 PC spec? I had already reset the AI preference as the following link but it doesn’t work. URL...
When I double click an AI file to open it, I get this message: "Can't open the illustration. There is not enough room for the window, increase document area and try again". This error started happening about a week or two ago. Although it is inconvenient to have to go to File>Open and then locate the file to open it since I am used to doing it the other way at least it is a way to open the AI file. I just discoved that if I double click a graphic in a Adobe Acrobat Pro using the Edit Object I get the same error message. This is a problem.I have checked previous discussions about this and tried things like unchecking the "open as tab" option in the preferences but that does not work.
