When in the attribute editor, after you edit an attribute then click "select blocks", to choose a new block to edit, an alert appears telling you that an attribute in the block has changes and asks if you want to save these changes. I ALWAYS want to save these changes...
Therefore, my question is, is there a way to turn that alert off or suppress it?
creating a block with attributes. I did manage to get my block set up and inserted in a dwg, but I am unable to change the "value" of any attribute. Unless I click on the "..." button next to the value field.
View 1 Replies View RelatedWe've just started using an attribute in a dynamic block and I'm curious if there is a faster way to edit the text, like how you just click outside the dtext or mtext editor to save and exit. the editor.
We only need to edit the value field, not any of the other attritubes. I really like how the dynamic block is saving us some time, but the outdated editor is really irritating, and it's not always convenient to hit Tab then Enter on the keyboard.
Is there perhaps an alternate editor, or a way I can edit the value text in the mtext editor by default rather than opening up the Enhanced Attribute Editor?
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
I have a block with attributes. When I use the enhanced attribute editor, under text options, the height is grayed out, not allowing me to change the height. How do I fix this?
View 1 Replies View RelatedJust upgraded (not sure it was truely an upgrade) to LT 2013. When double-clicking an attribute in LT 2009 a nice dialog box popped up that could be tabbed through to each attribute. In 2013 the Enhanced Attribute Dialog box will not allow tabbing, you have to physically click on each attribute item then go to another spot in the box and click again to make the change.
View 3 Replies View RelatedI am extremely new to Autocad and working with the Enhanced Attribute Editor. I have a drawing frame block with existing notes that I can alter with the enhanced attribute editor. I want to add some new notes to it but am having some problems. I have added an attribute Definition (ATTDEF) but am not sure how to go from there.
View 4 Replies View RelatedBy default a double click on a attribute opens the "enhanced" function. I don't want this, I want the "normal" attribute editor, is there a variable to change ? Or another way ?
View 1 Replies View RelatedI was given a customers title block but there are no defined attributes. I'm using AutoCad Electrical 2010. I have to double click on the title block and the edit block definition box pops up. I select the block to edit and click ok. I would like to use the enhanced attribute editor on these title blocks. Is there a way to define the attributes on this kind of title block using the enhanced attribute editor?
View 9 Replies View RelatedI having one DWG with in 50 layouts. In that, if i going to edit or change the date, description, and etc, means it will take too much time to update in all layouts (50nos.)
If possible to edit all layout with in one time?. One more thing, one type of title block used to all layouts and title block was with enhanced attribute text.
I use civil 2012, and have a drawing with over 400 attribute blocks that are all set to be "green" in the enhanced attribute editor, properties tab. I would like for all of the attributes to be set to "by layer". However, I find that the it only allows me to change one block at a time. As said earllier, I have over 400 blocks.
View 2 Replies View RelatedIs there any Event when The enhanced properties editor dialogue show out? I want to do something when the dialogue is showing.
I first use the CommandWillStart Event to catch the "EATTEDIT" order ,however,if only covers the condition that users doubleClick the block .when users first input EATTEDIT command then select the block this event was wrong!
I have been making a title box for my drawing layout and have been using attributes. all my attributes open in the 'Enhanced Attributes Editor'. But for my Scale option, i was wondering if there was any way of creating a drop down list in the enhanced attributes editor instead of typing the value in each time?
View 9 Replies View RelatedI created a block with 4 tags. I also created a block properties table, which after the block is placed can be activated and acts like a pull down menu and will update and populate the tags.
When I insert the block I get a prompt for each tag, is there a way to suppress these prompts for a block? I tried the setting ATTREQ to 0 and that suppresses the prompts for all of the blocks I use in the drawing, and I only wish to suppress the prompts for this particular block. I am using AutoCAD 2013.
I've a very strong virus auto alert message in my Autocad 2007 -2011, i try to re installed the product and clear the registry editor as well as change all the AutoCad version, i also try to scan with Kaspersky and Avast but none of them can catch the virus. Unfortunately the auto alert message still keep alert while i'm opening the autocad design file,
View 9 Replies View RelatedIs there any way to disable the "would you like to open the file read only?" alert window when I open a read only file?
Software: Inventor Series 2011 SP1 x64
OS: Vista Business x64
CPU: E6400
RAM: 2*2Gb GeIL
VGA: Quadro FX 550
What I really want to do is on our fire alarm blocks we have 3 different attributes one for the address, the candela and one for misc info. I want to make an attribute that takes the number from the candela (15,30,75or 110) and change a different attribute to a value depending on which candela we use (such as 15=.078, 30=.113, 75=.195 or 110=.259). But I don't want the .078,.113,.195,.259 to print out on paper, I want to export block information excel file so I can add up all values.
View 2 Replies View RelatedIs it possible to suppress alternate dimensions below a certain value? I would like my dimensioning to be set up as follows.....
everything above 8 feet
97 1/2" [8'-1 1/2"]
everything below 8 feet
94 3/4"
I am using AutoCAD 2011. When I create a radius dimension on the inside of an arc, and I place the dimension beyond the center point of the arc, AutoCAD automatically draws an extension to the arc and points my radius dimension leader to the outside of this extension, rather than to the inside of the original arc.
I don't really like this. I prefer for my demension leader to point to the inside of the original arc. I can get exactly what I want by going into "Properties" for the radius dimension and turning the "Ext Line" property off.
Rather than having to do this every time, I'd like to create a dimension style that would give me this functionality all of the time. When I try to modify my dimension style, I see that there are just two parameters for Suppress Ext Line 1 and Suppress Ext Line 2. These seem to apply to both linear dimensions and radial dimensions. Is there anything I can do to suppress the extension line for radial dimensions only and not linear dimensions?
My Stroke Refresh is set to off.
The panit effects viewport flickers several times per second while sliding the stoke or brush parameters in the attribute editor. It blink once when holding down the Alt button or press the "redraw panit effects view" button in the view port. It seems like it's keeping redrawing for every change related to the parameters, and this problem is just in the panit effects mode.
I'm a newbie to panit effects,
Following is the flickering screen shot.
Autocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
I have just noticed when attempting to move the attributes in the blocks of my drawing that the grips have disappeared, where they have gone or how to turn them back on?
View 6 Replies View RelatedI need to create blocks in which the same text appears twice. I've created an invisible attribute to hold the text and created two mtext object containing fields that point to the attribute value.
The text fields show the default value of my attribute but will not change when the attribute is set on an placed instance. After setting the attribute on an instance I've tried UPDATEFIELD and REGEN but still I see the default value.
I have an exisitng attribute that have several line items. I want to add more items to this attribute same attribute. The attribute block name is "JLR24X36" and there are 15 existing tags within this attribute?
View 3 Replies View RelatedI would like to learn is there any possibility to provide renaming the tag name of a created attribute, if there is a way, it could great to learn it from your side.
View 5 Replies View Relatedwhenever I make a block with attributed text the block works just fine when I insert it into a drawing like normal. However if I try and open the block drawing by itself the attributed text just turns into normal text after I get this message "Orphan Attdef Objects found & Converted to Text". This problem seems to happen on two of our machines but a third co-workers machine still works fine.
View 9 Replies View RelatedI need to change an attribute tag that was (locked) during the making of the title block.
See screen shots.
Autodesk Plant 3D Premium 2012
Autodesk MEP 2012
HP 3.2 Ghz CPU 16 ram
1TB 7200 rpm SATA 3Gb/s hard drive
2GB DDR3 NVIDIA GeForce GT 530
HP 2311x 23" LED Monitor
Is it possible to make a single attribute appear in more than one place on a single block? i.e. We have a title block in which we want the drawing number and revision to appear at both the top and the bottom of the page. We want to be able to change the information in the attribute on the bottom of the page and it automatically update the attribute at the top of the page. Is this possible?
View 9 Replies View RelatedIs there a way to have attributes automatically update? For example, we often "save block as" from block editor to create a new block. We usually have block name on defpoints layer so designers can see block name on screen.
We now have to edit this text each time new block is created from existing block. If default value of attribute could be the block name it would save time and errors.
I need to make a block with one attribute named SIZE which will be filled in when the block is inserted into the drawing. On this block I would like to display the value for SIZE in 3 additional places besides the attribute SIZE.
So to make a long story short I would like to take 1 attribute and display it 4 times. If I change the attribute I would like for all 4 displays of it to update with the change.
I've tried making the 2nd, 3rd and 4th occurrences attribute with fields pointing to the value of the 1st attribute object but it is not working. How do I go about accomplishing this.
This is my Dynamic Block with attributes.But when I will stretch or flip the block the attributes will stay on the original positions.
The attribute mode is on locked so I don't get it. Any way to link the both attributes, so I only have to fill in the value for once.
creating text attribute across several sheets?
View 4 Replies View Related