I wish to compile individual comic strips I am drawing in Illustroator into a multipage comic book. inDesign is way too sophisticated and expensive for me to do only this.
I could export to e.g. GIF and compile in Microsoft Word but this loses the link to the original Illustrator file (so a hassle when I need to correct the original file).
better way or an inDesign alternative that works on Mac?
It is possible to assemble two images together on Lightroom?
View 4 Replies View RelatedI need to use lots of individual blocks as one big block. The blocks are dynamic and I'm looking for a way they can act like one
View 6 Replies View RelatedWill lightroom be able to put together a time-lapse, after I shoot it, or do I need to do in Elements 10, or another program?After I finish editing a photograph, I want to put only edited photographs in a new catalog.
View 9 Replies View RelatedI was wondering if you create the parts then assemble them. Or can you create and assembly then break out the parts? I am just testing inventor out to see if it would be good for my company.
View 9 Replies View RelatedSomething is strange with the constraint activity.
I'm using the constraints to assemble a project. I select the parts with the proper constraint, when "apply" is clicked the parts do not "pop" to location as they use to. I have to go up to "manage" the click "rebuild all" for the parts to move to new location.
Can’t extrude in assemble drawing in inventor when I draw a sketch and finish sketch
And try to extrude the sketch it extrudes but only in cut mode it is the only button that is working the rest are all faded out.
I am making an animation of how to assemble an outdoor fireplace system.
I have a mortar bag modeled that will be used to apply mortar to all the areas where different components are joined to each other.
I have figured out how to use a cylinder and pather deform to make the mortar come out of the bag.
After the first section of mortar is applied, how do I move the the mortar bag by iteself to the next area tha needs mortar?
There is an "attachment" position controller applied to the mortar bag which tied to the leading edge of my mortar bead.
I'm not sure how to disassociate the mortar bag with each line of mortar that gets put down and then let the mortar bag move around the scene to the next area.
Alienware Area-51 - X58
• ASUS P6T DELUXE V2
• INTEL i7-975 3.33GHZ - Faster, SOON!
• 24 GB RAM - 1600 MHZ - Faster, SOON!
• Samsung 256GB SSD
• NVIDIA GTX 295
• Astek Liquid Cooling - H80i SOON!
• 1 KW PSU
• Windows 7 - 64
• 3DS Max 2013 - Entertainment Creation Suite
What is the difference between Constrain and Assemble?
They both seem to create the same mating constraints, but Assemble doesn't work with adaptive parts.
Any other difference (other than the interface)?
I went through a bunch of tutorials on how to draft and assemble parts and when going through them step by step everything looks really neat and works well. Start with blank files and try creating something from scratch and that is when the laws of the universe no longer apply.
I am sure I am doing something wrong here but the problem is when logic and common sense no longer apply and each mouse click and drag is bound by some law that cannot be documented let alone repeated that is when I start getting lost.
My assembly is mainly comprised of pipes, clamps and pipe T-joints which are joined by rotational joints. I am sure this has to be a tricky assembly task since I have witnessed numerous times my assembly flying apart in every possible direction into a tangled mess from just trying to nudge one part.
For example -> Currently I have a part bound by a single rotational joint and I ground the pipe this joint is connected to. I have used this many times now to rotate parts relative to one another to prevent the arbitrary explode and re-arrange that occurs if you do not ground a part. Now all of a sudden when I try to rotate this part I get a circle with a cross through it beside the mouse pointer telling me that this will not happen. Why now? For a sanity check I went back to a previously saved file and the same scenario works. Why?
The best part of this software is the: "The assembly cannot be solved" dialog that pops up as soon as anything gets more complex than a single joint. This dialog fascinates me since after it pops up and I cancel it I will spend a half hour trying to ground parts and nudge the pieces closer together. Then I try the exact same joint and...... it WORKS! It blows my mind every time. So is there a internal timer that ensures you spend an appropriate amount of time screwing around before it will let you pass to the next level? If I can ground/nudge the two pieces I want to join in about a half hour why can't the software do this, maybe I am missing something but I thought this was the point for software like Inventor?
How I would try manipulate it if it was in front of me. I see a part that needs to be rotated so I try click and drag it into place, of course Inventor has no clue that the part I click on could possibly be the one I want to move so every piece not grounded will fly off into random directions.
I am struggling with a relatively simple exercise in inventor. I would like to assemble two pipe segments intersecting one another to form a pressure part nozzle, as shown below:
I cannot seem to find a relatively easy method of doing this. I've tried pipe & tube routing but it doesn't seem to have this functionality. Apart from actually modeling the nozzle to have the contour shown above, how would one achieve this easily?
Pipe & tube routing allows one to align these two segments of pipe, but it doesn't contour the nozzle pipe segment to the circumference of the pressure part segment.
I want to arrange these outer circles in a corcular pattern at equal distance and at equal angle from each other without using circular patten feature in assembly tab. How do I do that.
The reasomn I dont want to use circular pattern in assembly tab is if I do that then, I cannot change color of each outer circle separatly If I change one color it changes color for all of these whcih i dont want.
I want to have each outer circle of different color.
I am trying to assemble two parts together by the constraint feature, but the problem is that I mirrored one of the parts to make the other and now that I am trying to assemble them together they both light up showing that they are the same part. I am trying to make them to individual parts so that I can assemble them. Can I fix it in the Assembly or Part drawing?
View 2 Replies View RelatedI am assembling multiples leds on a matrix that I made.
Is there any way to make the assembly using constrains to place the ipt LED design on the matrix without placing one by one?
The constrain I am using for each led is Insert.
There got to be a way to insert the leds directly, like when you are placing screws and it detects all holes and places the necessary number os screws on the existing holes.
How do i assemble an extremely large format image to be used in a convention display?
View 8 Replies View RelatedI am trying to assemble an extruded tube that has holes drilled, to a flat plate to be bolted together. when i go to assemble the parts the drilled holes will not highlight to attach the plate to.
View 9 Replies View RelatedI have a part with multiple holes created in a single hole feature (i.e. not patterned but made by selecting multiple sketch center points). As desired, the holes all have the same size since they all fit the same fastener. Is there a way to easily assemble fasteners to all the holes? Currently, I am using insert for each fastener and this gets tedius if there are many holes. Additinally, if the number of holes changes, a manual update is required. I'm hoping there is something that works similar to associative patterns.
INV 2013
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
just want to add dimentions for the graphics. like CAD programs and Corel draw.
View 2 Replies View RelatedA client notified me that a pdf I created prints but all of the new .eps files don't show in the print. The one thing I did differently was to convert everything to RGB gor the PDF output since they were getting odd results from my cmyk files when viewed on mobile devices. When I try printing the same document on my own printer everything prints correctly. why the eps graphics are not printing?
Also, I just noticed that the small avatar or symbol next to all my eps files shows up as a little page with a turned corner and grid lines. Is that a new development I overlooked or an indication that something else is going on?
I'm currently using v10.I have created several images that I want to use on a web site. How should I save these graphics files? When I save them out of Illustrator (either as a gif or jpeg) the image looks like crap when I put it on a page.
View 1 Replies View RelatedUsing Illustrator I've developed an alphabet of letters that I'd like to turn into a font (otf file). I'm wondering is it possible to accomplish this with Illustrator or any of the other software in the Adobe Creative Suite? take these Illustrator SVG files, and make them into an Otf?
View 4 Replies View Relatedis there a way to use the spacebar for panning around a document like you can in Illustrator?
That is one feature of Illustrator that I do like when I use that program.
I can use the pen tool, hold down spacebar to move the image then when I release the spacebar it automatically goes back to the pen tool or whatever tool you are using.
I've used CorelDraw since version 3 and admit that I can't figure out how to do this in Corel.
For the past 2 months I've been using a Yiynova 10.1 tablet to design in Illustrator CS6. Later today I have an issue where the cursor would be on place but immediately move to a random area on screen. It is quick and I can keep my pen to point where I need to. However, everytime when I do close Illustrator the tablet seems to work perfectly. Photoshop and other programs seem to respond well with the pen and tablet, but Illustrator doesn't. I have ran a windows compatibility to all previous versions of windows and there are no results. I have reinstalled my Illustrator CS6 and the tablet doesn't want to play well still.
View 2 Replies View RelatedHow does one import graphics into Illustrator while using the perspective feature?
View 3 Replies View RelatedWhen i save a cdr file to adobe illustrator some fonts are getting closed like "zero" especially the percentage"%" symbol,
View 12 Replies View RelatedI am an Illustrator user but I am working with a company that uses CorelDraw. Recently I received several large files from them with bitmapped images within the CorelDraw files. I don't know how they are saving or exporting them, but when i receive them they look like standard Illustrator eps files. However, when I open them, the bitmapped files are embedded instead of linked, which is a no-no in Illustrator. These embedded files have a default resolution of 72 dpi no matter what the original resolution was. So, my question is, what is the standard way CorelDraw brings in bitmapped files and is there a way to export files so that bitmapped files retain their original resolution.
View 8 Replies View RelatedI'm running illustrator CS5.5 on Windows 7.
I'm making variations of a logo and one of them is a single color reverse. The logo is basically the letters 'MCS' written on a block of color. When I try to use the Pathfinder's subtract feature to knock out the letters from the block I get some slight distortion on the letters.
I was running CS2 before and I did this many times but I never had any distortion.
Is there a setting I can change?
Using CS5 windows won't print all the graphics of the file, even to a PS printer. Some of the graphics don't print at all and some print in a reverse color.
View 5 Replies View RelatedI tried to copy paste a graphic generated with SmartDraw software l]].....http:[url] version 2012, wich I use to make my graphics, I paste them to an Illustrator template and nothing happens, there is just one big blank square on it. ,I used to have no problem with CS4.
View 2 Replies View RelatedWhen I export a CorelDraw file with multiple pages to an .ai file, the resulting file has only the first page. Is there a way to export all pages of the document to .ai?
View 13 Replies View Related