Illustrator :: EPS Graphics Are Not Printing

Feb 6, 2013

A client notified me that a pdf I created prints but all of the new .eps files don't show in the print. The one thing I did differently was to convert everything to RGB gor the PDF output since they were getting odd results from my cmyk files when viewed on mobile devices. When I try printing the same document on my own printer everything prints correctly. why the eps graphics are not printing?
 
Also, I just noticed that the small avatar or symbol next to all my eps files shows up as a little page with a turned corner and grid lines. Is that a new development I overlooked or an indication that something else is going on?

View 4 Replies


ADVERTISEMENT

CorelDRAW Graphics Suite X5 :: Missing Text Or Graphics When Printing?

May 9, 2011

X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.

Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects.   Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.

Very costly and time consuming - print preview shows all correct but output is not the same.

Running Win 7 64bit  8GB Ram

View 14 Replies View Related

CorelDRAW X6 :: Printing Vector Graphics

Aug 30, 2013

In previous versions of CorelDraw, a vector graphic could be saved as a WordPerfect Graphic with a .wpg extension.

When you pulled this graphic into MS Word, it printed as a vector graphic and was perfect. This was great for such things as signatures, and looked realistic.

BUT with subsequent versions of MSWord, the .wpg graphic is no longer recognized, so one is left having to export a .cdr vector graphic as an .emf file which is NOT vector graphics and looks pixellated.

Interestingly, I can copy a .wpg image from a  file made with Office 2007, into Office 2010 and it takes it!

Any alternative format that one can use to get Word to recognize as a vector graphic?

View 8 Replies View Related

CorelDRAW Graphics Suite X5 :: Printing Will Not Align

May 11, 2011

I have a design on one layer, and a boundary line around the design on another layer. visually on the screen they both line up . However, when I print the images, they do not line up - they are significantly out of line with each other. It is as if they have been printed to different paper settings., for example the registration marks are not line up.

View 10 Replies View Related

CorelDRAW Graphics Suite X5 :: Printing Only 1 Page

Jan 12, 2012

I have just had to install Windows 7 64 bit and now find that when I print to my HP Business Inkjet 2300, I can only print 1 page. If I set the quantity to 5, I still get just 1 page. HP won't be updating the driver as they say that the printer is obsolete although they are still selling it.

View 2 Replies View Related

CorelDRAW Graphics Suite X4 :: Printing Labels X4

Jun 18, 2012

Have created a customised label equivalent to Avery L6008 - very small labels 7 across and 27 labels down.  Prints perfectly.  However, I would like to be able to vary the design and print different labels across the 7 columns.  Either at the creation stage - use the template and select which column is utilised or at the printing stage restrict the printing to 1 column only.  Does this make sense?

These are for some Geocaching buddies who want their own name on the labels and a full sheet of 189 labels is too much.

View 2 Replies View Related

CorelDRAW Graphics Suite X3 :: Printing Too Large?

May 7, 2011

I'm using Corel X3 graphics.  Windows Vista.  HP officejet pro 8500a premium printer.  I'm trying to print a file I used to print all the time.  It's a map with bitmaps.  I must have accidently changed some settings in CDX3 because now it prints too large--it won't even fit on the page.   I've tried changing every print setting that relates...Fit to Page, etc.  I also restarted corel while holding down the F8 key to reset the factory defaults.  I've re-installed Corel 3 times!  I'm at my wits end. 

View 8 Replies View Related

CorelDRAW Graphics Suite X4 :: PowerClip Not Printing

Nov 14, 2013

I am using X4 for use in my dye sublimation business. I have an image that was provided to me from my customer. I created a template in Coreldraw, sized the photo to fit and power clipped it into the template. I than created the text the customer wanted and placed it over the image. I than grouped everything together and printed the image. When it prints, the only thing that prints is the template border and the text. I than took the same template and text and power clipped a completely different image into it. Sent it to the printer and voila, no problem.

The image the customer sent to me is a .jpg image. I don't understand why it won't print. Is it possible there is some sort of code or something within the image that is preventing it from printing ? It sounds far fetched to me but I had to ask. If I export the completed image as seen on the screen to a Jpeg and view it on the screen, the powerclipped background is there.

View 5 Replies View Related

CorelDRAW Graphics Suite X6 :: Printing Of EPS Files

Nov 14, 2012

file type: channeled .eps file created in photoshop (my 'goto' for screenprinting seps)

system: windows 7, coreldraw x6

problem: once imported into CorelDraw, in the print dialog the pre flight will analyze the document and it takes forever; if it does not crash, once completed every other function takes forever to edit (Ex: to deselect a spot color will take 15-20 seconds to implement)- then when printing, errors occur.

1) previous versions of Coreldraw does not have this problem
2) this happens with all printers, even pdf print driver.
3) workaround that works: save the channeled eps file as a Photoshop file.

View 2 Replies View Related

CorelDRAW Graphics Suite X6 :: Layout And Printing

Aug 28, 2013

I do not understand the process to print my document on A3 printer.My document is a small A5 booklet of 8 pages . My layout options are as follows. Map folds Side 105 x 148.5 Binding left.CorelDraw on my desk I have a document giving the property the following 210 x 297 min (A4). When I send my document to print on A3 printer (HP 2800 pcl), I end up with four pages on the first fold of my A3 though logically I should end up with two pages per folds.So what is the right method for this type of work?

View 3 Replies View Related

CorelDRAW Graphics Suite X3 :: Layer Not Printing

Mar 20, 2012

I am creating a brochure in X3 and when I do a test print one of the layers is not printing. Although I have actively used layers in Autocad, I don't mess with them much in CorelDraw. However I do move objects from front to back and vice versa. 

When I started having this problem I went to the object properties to see if the layer was turned on. It was. I don't know if it is related but when I do a print preview the whole program becomes uncharacteristically unstable and shuts down.

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: Printing In Landscape

Mar 8, 2012

I cannot get the printer to print in landscape since we loaded X5.

View 1 Replies View Related

CorelDRAW Graphics Suite X6 :: Powerclip X Printing?

Apr 6, 2012

When you extract everything from a powerclip, the object that was the powerclip retains it's powerclip state. The biggest problem is when it no longer has any contents, that big X appears across the object to show that it's an empty powerclip. OK, I can deal with that or ignore it, but the problem is, the thing acts like it's part of the object as far as printing goes, and that I can't have. This can't be the way it was originally intended to work? Shouldn't it be just an on-screen indicator, and not a physical part of the object now? I know I can revert the object back to a "normal" object, but it seems to be just another useless step that shouldn't be needed.

What I'd like to see is an option that when a powerclip no longer has any objects inside, it automatically reverts to a normal object like in previous versions of Draw. Of course, it's too late now, that will never happen. If anything, it should be possible to have the empty powerclip X indicator be changed over to a "phantom" object that is only shown on screen and doesn't exist in any other way so that it doesn't print or otherwise effect the drawing.

Great, it shows up in PDFs too. Looks like I'll have to get used to hitting that "No Frame" button every time I hit the "Extract Contents" button. Or maybe I'll write a macro to do both and link it to a toolbar button. Reminds me of a post I made about Corel Script in version 6 (yes, six, not sixteen) where it allowed us to write our own "feature" fixes when options were removed for no good reason.

View 16 Replies View Related

Xara :: Vector Graphics For T-Shirt Printing

Sep 10, 2011

I want to get some designs I've done printed, the design are pretty simple block colors and shapes, Xara Xtreme 5 is brilliant for doing these designs. However the T-Shirt printers (spreadshirt) want to files a vectors graphics. This is what they say on the site

Transforming objects into curves
Transform all design elements and text into curves.

This is possible with Corel Draw: highlight the part of the design you want to convert. Click on 'set up' - 'transform into curves'.; You may run into a few problems when converting complex pixel graphics into curves. Try to convert as few individual objects and colors as possible. Note: vector graphics for plot printing can have up to three colors per design.

Check the minimum size of the object
After you've converted to curves, you'll have to check every element of the design to make sure that it has a minimum size of 1.5 mm. One trick for checking this: create a small circle with a diameter of 1.5 mm and lay it over the smallest parts of the design. If the area is smaller than the circle, it's too small for plot printing.

Save image as vector graphic
Unfortunately, you cannot just open a pixel graphic into a vector program and save it in a vector format (.eps.) This is not enough. You have to manually make sure the pixel graphic has been converted into curves.

Can I just export as an .eps and it'll work, or do I need to convert to editable shapes then export?

View 3 Replies View Related

Lightroom :: Printing Overlay Text And Graphics?

Aug 7, 2013

Printing overlay text and graphics?

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Printing In Reverse Order?

Jun 16, 2011

I'm printing booklets for our inhouse marketing and to do so (because of the printer I'm using), I have to send the document in reverse order (last page to first page).

I have to print from a PDF and this changes to colours... I don't see anything in Corel I can check so it's done automatically.

View 4 Replies View Related

CorelDRAW Graphics Suite X5 :: Printing Labels In Rows

Jun 5, 2012

I have a question regarding printing labels. I just want to print labels, for example, in row 3 and 4. I managed to print 1, 2 rows (and then rotate the paper :), how can I print just rows 3 and 4 ? And then just row 5, for example? There is an option imposition in layout which should correct that, but I can't find it? How to set this things? Is even an option for that?

View 6 Replies View Related

CorelDRAW Graphics Suite 12 :: Data In Buffer 1 GRC-50 Not Printing?

Sep 23, 2011

I tried the cocut software and it worked for about 3 days, now I get the Data in Buffer message on the screen and it does not print. The motors fire up when I try, but it does not cut. XP or Windows &, no difference.

View 2 Replies View Related

CorelDRAW Graphics Suite X6 :: Colour Management In PCL Printing?

Oct 3, 2013

We are just in the process of setting up Corel X6 for deployment in our office and we are trying to get a handle on the colour settings. We have upgraded from CD11 which  had very little in the way of colour management and so we are somewhat inexperienced in how to set up.

We have two production printers an OKI 821 and a Ricoh C820DN which we print to using PCL drivers. We believe that we therefore need to use RGB as our colour mode and use an ICC profile for each printer for colour correction with colour management switched off on the driver. Is this correct? We've had a try this afternoon and the colours on the prints differ greatly from the display (which has been profiled using an xrite i1pro calibrator). They also differ from each other.

The monitor profile is set as the device profile in the windows colour system, and we are using that as our engine in corel.

View 1 Replies View Related

CorelDRAW Graphics Suite X6 :: Texture Fill And Printing

Jan 15, 2013

Texture fill and a printing problem.  They may be related. First, the file I am working with was originally created in Corel 10.  I'm using X6 in Windows 8.

It is a map. I have several layers but the two layers I am having trouble with are the continental shelf and the land layers.

I cannot texture fill either in X6.  I go through all the steps but the fill will not show on the screen nor will it print.  I can fountain fill, solid fill etc .these layers and they will print as filled.  This is the same for both printers I have, which are also new with 128MB of memory each.

In addition, I can get a fountain fill to print on the continental shelf layer, but cannot get a fountain fill to print on the land layer; even though the fill shows on the screen.   I can get a solid fill to print on the  land layer.

I've the objects in the proper order, the print is turned on for all these layers, etc. 

View 6 Replies View Related

CorelDRAW Graphics Suite X4 :: Printing Objects Too Close Together?

Jun 3, 2013

Print preview shows objects spaced correctly.  But when it prints them, it compresses them together on the page (but the objects are sized correctly).

When I print the same file from a different computer on the network to the same printer, the objects are spaced correctly.

Which leads me to conclude it's a setting in CorelDraw on the first computer.  Also, I reset all the default settings in CorelDraw using the F8 technique, but that didn't solve the problem.

View 7 Replies View Related

CorelDRAW Graphics Suite X6 :: Printing To Mimaki CJV30-160?

Jun 25, 2013

printing to the Mimaki CJV30-160. I am looking for the most  efficient way of printing multiple contour cut decals.

View 14 Replies View Related

CorelDRAW Graphics Suite X5 :: Text Printing As A Tone

Oct 18, 2011

I have gone from X13 to X15. With x15 all my text prints grey. This happens with both printers I use. If using x15 and saving as v13 I can open x13 and the job will print correctly. I am working in Windows 7. I think the problem is with a new printer option that does not come up with x13 but is there in x15 and I don't know what to change.

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: How To Reduce Printing Usage

Jun 26, 2011

how is possible to reduce the printing usage? a friend of mine told me that I have to reduce the percentage of each colour in the image, but first of all I don't know how to do that, and second I don't know if it will modify the image.

View 5 Replies View Related

CorelDRAW Graphics Suite X6 :: Printing File - Some Characters Are On Top Of Each Other

Mar 26, 2012

text_problem.cdr

When opening the attached file and printing it to efi/fiery rip (or adobe pdf), some characters are on top of each other. Word spacing is also to large. Printing the same file with X5 without problem. File is originally created in X5. Tried with the new "update text" feature as well, same issue. 

View 15 Replies View Related

CorelDRAW Graphics Suite X5 :: Printing To Xerox ColorQube 8570?

Mar 17, 2011

I'm trying to print to a xerox colorqube 8570 in black and white from coreldraw graphics suite X5 using Windows7 64 bit.  It works in XP.  When I select  print, preferences, Print quality, Fast color, Color Options, Black & white it prints in color, what xerox drivers I need and how do I set them up? or is it a setting in X5 I need to adjust?

View 5 Replies View Related

CorelDRAW Graphics Suite 12 :: Converting PDF Files For Screen Printing

Aug 8, 2011

I'm receiving PDF files for screen printing.  How do I convert to Corel Draw in order to print?

View 12 Replies View Related

CorelDRAW Graphics Suite X5 :: Color Separation For Screen Printing

Jun 6, 2011

Well as much as I do design work for customers for tee shirts,I never had to do color separation, for the screens.I’m wondering how do you do this? ( how do you separate colors in corel, for screen printing) .

View 4 Replies View Related

CorelDRAW Graphics Suite X6 :: Black Color Printing Looking Greyish?

Aug 9, 2013

i noticed that when i try to print anything that has a black in it it comes out looking greyish but when i print the test page from my printer the black comes out looking black.

on the bottom of the design page i see some thing saying

(Document color profiles: RGB: sRGB IEC61966-2.1; CMYK: U.S. Web Coated(SWOP) v2; Grayscale: Dot Gain 20%)

View 9 Replies View Related

CorelDRAW Graphics Suite X5 :: Not Printing Bitmaps On HP Inkjet Printer

Oct 23, 2011

I have a problem printing bitmap images on CorelDRAW documents in my work computer (Windows Vista Home Premium 32 Bit). I have a HP 3535 inkjet printer, and It was prinitng normally for some time, but one day the printer suddenly stopped printing images from the CorelDRAW documents and only prints text and vector images. The same happens in Photo-Paint, it simply prints in blank.

I Tried to restore the program to default settings using the F8 command with no luck. This really annoying and I need to print bitmaps for my work. This happens in all my documents...

View 4 Replies View Related

CorelDRAW Graphics Suite X6 :: Color Settings For CMYK Printing

Feb 2, 2013

Ideal color settings for exporting .jpg and .eps files for CMYK printing? The default X6 settings result in rather washed out looking exports (both on the screen and on the prints). Black looks very dark grey etc.

Never had this issue with X3 but I understand that X6 uses a totally different color engine so I figure I just need to know the correct settings.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved