Customer supplied me with a "print-ready" PDF and it's in my dropbox folder: [URL]
The map streets supposedly have lines adjacent to the names, but the PDF doesn't show them on my Mac, Acro Pro XI as well as Ily CS6 when I open the PDF.
She created the PDF using Ily CS4 and saved as PDF. Can't see the lines. I asked her to save as .eps... again the lines are 'disappearing.'
When I open her PDF using Ily CS6, I get an error message "An unknown shading type was encountered." Not sure if this has anything to do with the 'disappearing' lines or what.
I am tasked with tidying up some drawings that have been exported from Vectorworks and it seems there is a fundamental problem with the drawing.
Some lines do not appear when viewing the drawing, they only appear when panning or when I select all. There are some cases where a line disappears behind a rectangle as if it had a hatch fill yet no such thing exists.
I'm laying lines on top of an airial photo and my lines seem to be disappearing under the graphic. I know the lines are there, because they will highlight when the cursuer passes over them. Sometimes the lines will be on top and then under. I know there is something I'm doing wrong but can't figure it out. Is there a "Bring to the Front" like in MicroSoft applications.
I have a problem with Inventor 2013. The dimension lines have disappeared. I've been through all the dimension styles and layers to make sure I hadn't turned one off
All other drawings are fine and if I create another even using the same model it works just fine but I'd rather find out why than re-do the whole drawing.
Over the past 6 months we have had the feature lines just up and disappear from the drawing for no reason. They were not erased. They just went away for some reason but the surface created from them was still there.
I’m having some issues with my CAD. Every now and then, my contour lines disappear and I can’t get them to reappear. My surface border and triangles will appear but not the contours. Sometimes if I change surface styles they will appear but other times they are gone forever.
Troubleshooting: Regen AllAuditPurgeLayers on/offLayers frozen/thawedPromoting (if the surface is a data short cut)Changing the surface styleChanging the contour interval
None of this has worked…
AUTOCAD Civil 3D 2013 Windows 7 Processor: Intel (R) Xeon (R) CPU W3565 @ 3.20GHz Installed Memory (RAM): 12.0GB System Type: 64-bit
I started a drawing for a project, and so far I don't have much information in the drawing. I created a few objects, then went to one of my Layout pages and created a viewport to view the objects, and bam - some of the lines are missing (the yellow objects). As you can see on the screen grabs, I hovered over the Model tab to prove they're still there. Even when I double-click inside the viewport to edit through it and try to grab the objects, they're apparently gone. But they're not, they show up in the Model tab.
The layer they're on is turned on, thawed, and unlocked, but every object in that layer is missing when I leave the Model tab. I've opened viewports on other Layout pages, and they all refuse to show the yellow lines.
I am having problems with lines disappearing in a sketch randomly. I am in a small assembly, going in and out of sketches used for machining, and then the sketch lines and dimensions will all be gone when I enter a sketch. If I hover over the sketch in the browser I can see the lines highlighted, but when I remove my mouse the will disappear. I cannot interact with the lines or dimensions at all. If I draw a new line, it immediately disappears. I have tried changing some things in the view tab and settings but haven't had any luck.
My students draw all of the individual parts of a product as ipt files. Next they create an assembly using those ipt files on a iam template. Next they generate a multiview assembly drawing on a idw template from the iam file. On the idw multiview assembly random visible lines disappear and we are not able to get them back. Students are turning of the visiblity of some of the hidden lines on the idw assembly but not all hidden lines.
We are using a file created by another company and making additions to it for Interiors. While working in this file we have added some new layers and have begun to hatch new walls. While hatching some of these wall my boss received a message saying that the file had errors. He saved and closed the file at that point. When he re-opened the file a number of lines were missing from the file.
They appear to be completely random - i.e. parts of chairs are missing but not the whole chair, parts of walls but not whole walls. The things missing were not all on the same layer and were not necessarily items that had been hatched.
Note - we are running 2012 and the files were created in 2007
I frequently use Pantone solid coated colors in my work, and have to open that palette anew each time Illustrator has been restarted. I know that in CS4 I could keep that palette available, but I haven't been successful doing the same in CS5. I have saved my workspace, but the Pantone palettes disappear when Illustrator quits.
I have multiple files that I am converting to PDF files to print and all of them converted fine except one. When I convert it to a PDF half of the color changes to black. I can't figure it out and I feel like I've tried everything! And this is what it looks like when I convert it to a PDF.
I've been trying to use graph tool in Illustrator CS6 (I have Creative Cloud..) but having some issues when changing the design of columns. I'll create a design for a certain set of columns, but when I try to use the design in the graph itself they disappear completely. The data still shows in the data menu, but no bars! And its not on all the bars, usually just one set. I've tried reentering the data and also recreating the column design and nothing seems to be working..I keep having to restart graphs and having the same issue.
I've made a design in Ai CS6 (with colorspace) and have used several Pantone swatches. From a few Pantone colors I have used only a percentage of the color, for example the design consists of: 75% of Pantone 485 C, 32% of Pantone 1345 C and 100% of Pantone 154 C.
In the process of the design I have used several other Pantone colors which are not used in the final design, but they are still in the Swatch tab/list. So when you click on the triangle (upper right corner) > "Select All Unused..", the Pantone colors that are only used as percentages (Pantone 485 C & Pantone 1345 C in the example) are being selected as "Unused" ?!
I have been using Ai CS4 before this version and in that version this wasn't a problem.I could you percentages of Pantone colors without the swatch being selected as "Unused".
I really don't want to manual delete every unused swatch by dragging it into the trash bin.It would be such a time wasting handling.This is really inconvenient as I am working for a print and design company and need to save the Pantone colors that are used in the design, even if they are only a percentage of the Pantone swatch.
I have CS6 and I can not see the names, eyeball icons, lock icons and arrow icons in the Layers Palette. I see that the layers are there and when I hover my mouse over the layers the names and icon show up but they disappear once I click off the layers palette.
After placing an Illustrator file in Photoshop as a Smart Object, then double-clicking the object in Photoshop to edit it, the only swatches that remain in the Swatches panel are global ones. All the other swatches have been removed. (This is with the embedded file that opens; the original is unaffected.)
I assume this is by design, but any way of preventing it from happening, other than tediously changing every swatch to global before doing the embedding? And yes, I can always re-load the swatches afterwards, but that's also an extra step I'd like to avoid.
I need to transform a lot of dashed (single) lines into separate lines... Who can tell me how to do this in a few clicks. I don't need an outline of the dashed line. So the black dashes I need, the white in between the dashes I want to loose.
When converting a vector or Illustrator file (such as a logo) into a shape layer any gradient fill is lost. Is there no way to ensure the gradient fill is converted across or is this a matter for a future release of After Effects?
how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
I want to create charts, and in Corel Draw I could draw a line and then hit duplicate and it would produce evenly spaced identical ines. Is there some function on Illustrator that does this?
I have a stencil for Thermal Pads and I need to print it from an epilog zing printer. There are outlines of boxes, some with curved edges and some without. The boxes orinially started with spacing between them, but we need to illiminate the spacing so that we can fit more stenciles on one piece of material. The problem is that when I print the stencil the laser will cut out edges that touch twice, which causes the material to burn from the laser. Is there a way to combine these lines in a way that isn't just grouping or joining them as the laser will still recognize two lines not just one as it appears to look like once joined.
I dropped a raster image into Illustrator (AI) and with Live Trace, turned it into a vector image that looks excellent on my monitor. However, when I load the vector file into a PDF and then open the PDF, I see small, light gray hairlines between the colors.
I'm making a product label for a client. He wants a particular photograph (JPEG) for the background. The printing house wants vector images in CMYK.I'm fairly new to AI and probably not using "approved methods" although I took what I thought were logic steps to achieve my desired end.
I took the RGB JPEG, converted it to a .tiff in CMYK. I also tried converting the JPEG to .bmp and .esp - all in CMYK, before moving to AI. I Also tried placing the JPEG directly into AI.
I dropped those images into Illustrator separately and did Live Traces on each. At this stage, each attempt gave me excellent vector images in CMYK, but went wonky when I transfer to PDF.
Oddly, when I make a hard copy of that PDF on a hi rez digital printer (2400 dpi), the lines do not appear. However, I am still very concerned about those lines, because I will be sending a job off to be done on four-color offset printing. I'm sure the printer will freak out if he sees those lines and I am even more concerned that those lines may show up in the four-colour print process.
A local graphics person I spoke with suggested I would find my solution in Pathfinder, but I tinkered with that feature quite a bit and could not resolve the problem. Although, I wonder yet if that may be where I might find the solution, because when I hit Expand the blue path lines seem to correspond with the troublesome gray lines.
Someone else told me to hit Expand and then turn off Stroke. I believe I did that correctly, but there was no difference. I also saw no difference when I applied the maximum value for the Stroke. Other attempts at finding a remedy included Resample deselected, then Resample with a resolution of 300,
I have a map of Manhattan that has been boiled down to just vector lines of the roads. I'm trying to add effects to the lines to kind of stylize the map. I'm trying to create effects similar to the this example that I found online. The photo below was probably NOT created in Illustrator.
If, for example, I create a line which I want to duplicate, I hit Cmd + Shift + M and I select the distance, then I hit Cmd + D to duplicate. There's no problem here.
But if I want to duplicate the line progressively, in which I want to add 1 cm each time I hit Cmd + D, is it possible?
For example, I create a line, duplicate it 1 cm horizontally, and then I want the third one to be 2 cm from the second, the fourth to be 3 cm from the third, and so on.
| | | | | | | | | | | |
I can do it manually, it's just very time consuming.
I'm just trying to do the same job I've been doing for years but have a sudden problem seeing which lines I've selected. I suspect I've switched something on or off somewhere. I select a single line and it is highlighted. I tselect more than one and there's just a great box which also encompasses lines I was not selecting. The individual lines are not highlighted (as they used to be) so I can't see what really has been selected.
the darker part of the ear where the black line starts and ends .. i want to make gradient............ is that possible .. or is there a technique to create that effect?
I open an AI file into Photoshop and get these thin gaps (see image.) Usually, I can just re-do it and it's fine, but sometimes the problem persists. It hasn't happened enough for me to do a full scientific-method investigation.
