Illustrator :: Cancel Print Makes Adobe Freeze
Mar 30, 2011
I usually remember to save things, but this time I didn't. I went straight to print. But before I did, I hit the wrong button and pressed "cancel print". It's now saying, "cancelling print" for 20 minutes. I know its likely frozen but I don't want to lose my work. I have a mac and so I made a JPEG of the image, using GRAB application. Is there any way to save what I have? I know if I "Quit" the application, I'll lose it. How can I get it to finish it's "cancelling?"
View 1 Replies
ADVERTISEMENT
Jan 2, 2013
MacBook Pro with Mountain Lion, 10.8.2. Can't print from Adobe Illustrator CS3 or CS4. Crashes evertime. I tried uninstalling and reinstalling the printer. An HP 3100 series.
View 4 Replies
View Related
Mar 13, 2014
I am trying to close alert at once but the loop continues the alert, how can I stop the alert at once
var doc = app.activeDocument
var layersToTargetNameArray = ["Background", "Artwork", "diecut", "size", "sign off panel"];
for (var i = 0, il = doc.layers.length; i < il; i++) {
var curLayer = doc.layers[i];
[Code] ......
View 6 Replies
View Related
Jun 29, 2012
I think I did something with the polyline in my autocad, because it no longer makes lines it makes 4 sided planes. How to change it back?
View 3 Replies
View Related
Aug 20, 2013
I'm using 2008 and trying to get one side of my plots to be 1/2" from the edge of the paper (from one of the ends, not the sides). When plotting from R14, our plotter understands just fine and prints a standard ARCH D sheet just the way we want it. With 2008, our standard sheet template sits outside the dashed line that indicates plottable area.
I think that autoCAD thinks that the printer can't print that close to the edge, but obviously it can. I've gone into the 'modify paper sizes' options and adjusted the bottom margin to allow enough space for the plot. Plot preview looks fine and nothing is getting cut off, but when I actually print, the printer just prints an extra inch of paper past the margin I redefined so I end up with a sheet that is 24 x 37 and the edge of the plot is still not 1/2" from the edge of the paper like I need it to be.
We are trying to move from R14 to 2008 (and eventually 2014) as the office standard and this is the last hurdle that is baffling us.
View 4 Replies
View Related
May 23, 2013
Adobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies
View Related
Mar 11, 2013
Illustrator actually makes a file labelled "copy"everytime the particular file is opened. Each time it is opened, it makes another copy & tags a number on the end. It only happens with the occasional file, but once this happens, nothing will stop the problem. Selecting all & pasting into a new file does not work. There are no extra views. The artwork is originally copied from the customer file & pasted into a new document.
Mac Pro 2 x 2.4 Ghz 6-Core Intel Xeon/OS X 10.8.2/CS 6 Design Standard
View 12 Replies
View Related
Mar 19, 2014
creating a PDF out of my Illustrator document - I have a bunch of identical headers which I've literally copy & pasted in place on every page so they are exactly the same. Yet, some pages - when exported to a PDF - are inexplicably bold and ugly! I've exported the entire document at once so it's not cause of different publication settings. I just can't explain why the PDF displays some of the titles differently - when they are exactly identical. how I can fix this display/export error? It looks like I've accidentally used a bold font on some titles, which is not the case.
View 14 Replies
View Related
Jul 15, 2013
i downloaded this badge .eps file off this website. opened it in Illustrator, upgrouped the text so it would be editable but it wasn't. i then tried to expand the pbject but it wont let me. i have downlaoded pretty much the same thing off this same website & it worked fine but this one i giving me trouble. what makes an object able to expand or not?
View 2 Replies
View Related
Jun 25, 2013
Having problems with their line stroke disappearing when they apply an arrowhead style?
View 11 Replies
View Related
Sep 4, 2012
After latest Ai CS6 update (16.0.1) app is still unstable, it's works like alpha version. I still have the same problems (I reset preferences etc.):
- very very very often freeze on File/New...
- very often freeze on File/Save for Web...
I bought update from CS5.5 to CS6 but at this moment Ai CS6 is absolutely unusable for me. I'm back to Ai CS5 and everything works ok. How is possible that older version works like a charm on Mac OS X 10.8.1 on Mac Pro (Early 2008) than never version CS6?
View 1 Replies
View Related
Oct 11, 2013
I have not been able to use Illustrator. It starts up fine, but when i press new in the file menu, this appear:
View 4 Replies
View Related
Dec 11, 2013
Since installing Maverick I have encountered a problem with Illustrator CS6. Any file new or existing is subject to freezing. It usually occurs when I try to drag an object from one place to another within the file while working on a project. It can happen at anytime and I'm unable to save the work. I have to Force quit Illustrator and in most cases restart the computer ( 12 month imac).
View 9 Replies
View Related
Mar 12, 2012
I'd like to know is there a way to 'print' PDF files from Photoshop in OS X since Adobe PDF printer is no longer available in this version of OS X? I'm new to OS X and find this quite annoying since it was really easy to get compressed PDF files doing it from Win XP. I read somewhere that the only way to get the same result is to save Postscript file from Photoshop and then convert it to PDF but obviously something's wrong in my settings. When for example I need to get B2 size wallpaper, I get only a piece of it in A4 size document. I tried everything (different paper sizes etc)
View 6 Replies
View Related
Aug 10, 2012
I'm trying to print to Adobe pdf. I know I can use the DWG to PDF which works great, but I don't know if this is a bug or a setting that I have to adjust. At first I thought this was an Adobe Pro X problem, but now I'm 100% sure it's a setting or something in ACAD. When in model space, if I print and print to adobe pdf, the file looks good, sharp. I can zoom in all the way and it looks good. But in paperspace, when I print to Adobe, the quality is awful. like if it printed an image. It looks ok zoomed out but when I zoom in (and not that far in), the quality is terrible, what is it that I'm missing? What setting needs to get adjusted? It looks like an awfully compressed pdf file. Also, when printing in paperspace, it also takes twice as long. Its quick in modelspace and looks great.
View 3 Replies
View Related
May 1, 2012
I can't print dwg to Adobe PDF. Printer drivers ale installed and work fine in other application. Only in AutoCAD 2012 is some problem.
View 9 Replies
View Related
Oct 8, 2013
I need to constantly print PDF to email to client and to print directly from printer for our project leader to review. But whenever I print by "Adobe PDF" the color is lighter than if I just print from our office printer.
I setup plot style by making different % of screening on each color and by adjusting line weight on drawing layer.
View 5 Replies
View Related
Sep 20, 2011
When i attempt to plot some layouts to adobe pdf, they are coming out with sections that are blank. They are scattered around the drawing but the drawing content is missing. when i use the built in pdf creator, it is shifting some things around to where they don't belong and i can't have that!
View 1 Replies
View Related
May 23, 2012
When I try printing to an adobe pdf file I obtain the following error:-
%%[ ProductName: Distiller ]%%
%%[ Error: limitcheck; OffendingCommand: string ]%%
Stack:
67143
/mystring
24
120
22381
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
View 2 Replies
View Related
Mar 6, 2013
When I am in page setup manager and want to use the "Adobe PDF" plotter device, I can't set a paper size other than the standard one like letter, legal, 11x17 ect. I need to have the "Adope PDF" plotter to print a Arch D size paper but that selection dosent even show up.
I have troubleshooted all the usual supects, of going to properties next to the printer selection bringing me to the plotter configeration page, where in the device and documents tab I then proceed to the custom properties selection, where the adobe document properties page comes up and under the adobe pdf setting tab...I still cant change or find the Arch D 24x36 paper size under the adobe pdf paper size selection tab other than the standard seletions.
View 8 Replies
View Related
Dec 17, 2012
I earned a free 8 by 8 photobook with shutterfly. I tried making one on their website but I could not find any that I liked. I would like to professionally print my photobook I already made with adobe photoshop 7. I need step by step instructions how to put my photobook made with adobe onto shutterfly. I would also like to know some websites that will print pre-made adobe photoshop books for cheap in case shutterfly does not work.
View 1 Replies
View Related
Oct 20, 2013
Adobe 5 closes immediately when I click the "Print" button.
View 3 Replies
View Related
Feb 18, 2013
I'm making some graphics to be printed on a car. I have some lines with outer glow on them, but Illustrator won't render these unless I use 72DPI in raster effects reslution. I would like to go higher, but it won't give me anything. Guessing it's to heavy for Illustrator maybe? Is there anything I can do about this? I'm making my graphics in 1:1 scale, but I do it in a lower scale since it's just vector art anyway, however how would that effect my glow? Since it's a raster effect.
View 9 Replies
View Related
Sep 9, 2013
Im fairly new with illustrator, when i try and use live paint by selecting the brush strokes then going object > live paint > make, it makes my strokes really thin and it is really annoying
View 1 Replies
View Related
Aug 13, 2013
My company is exporting Postcards in Illustrator CS6. What we do is have a large data set imported into the Variables applet and use the Actions applet to record and export action and play it through the whole data set. We later combine the PDF files and print them as a batch.
My question is: Is there a way to create an action that will automatically print the data set while avoiding the print dialog box? It will make the process simple and move faster.
Also, what are your was of creating postcards? Catalogs?
How do people create a catalog with over 60 pages and keep the file size low?
View 1 Replies
View Related
Feb 20, 2014
I have a Samsung Laser printer. THe passive USB hub went bad yesterday, and I re-installed teh printer drivers. Everything prints fine from my on-line E-mail, Microsoft Word, etc. However, when I attempt to print from Adobe Illustrator I get a "Print to file" WINDOW that comes up, I never got this before I don't want to print to file (!!!!). I want to print to the printer.
View 3 Replies
View Related
May 21, 2013
I know the way to sendCommand to AutoCAD will cancel one order . I mean is there any other way to use .net API to cancel one order but not using 'SendCommand'
View 1 Replies
View Related
Dec 21, 2012
Level: Newbie OS: Win7 64bit Ps: CS6
I am working on a tut so that I can (try to) learn about Masks.
But for the life of me I cannot find info on what it means to ... cancel the Mask view.
( Here's the tut link ... [URL]...)
This is a pic from the tut. See in the top layer (Body) how the down arrow, folder and the link icons are grayed out?
Well, this is what the tut says to do ....
I cannot for the life of me figure out how to cancel the mask view.
I have Shift + Clicked the masks thumbnail but that doesn't give me the result like the picture above shows and I've tried the Alt + Click but that doesn't do it either.
what the author means by this ... Cancel Mask View ... ??
View 2 Replies
View Related
Oct 17, 2005
How did they make the login and cancel buttons,
View 5 Replies
View Related
Feb 5, 2014
I use energy analysis module of Revit 2014. Energy report give me fuel consumption I need to know how to cancel fuel from model as we don't use fuel for cooling or heating. Also, how can I change the cost of electricity. Ant data regarding energy analysis report.
View 1 Replies
View Related
Sep 13, 2006
I have an active command that I want to cancel, how can I do this? Right now I'm working with 3dorbit, if that makes a difference.
View 6 Replies
View Related
