Illustrator :: Alignment - Stroke Offsets In Odd Manner
Feb 27, 2014
This is an odd one. When I have a 1pt stroke and try to align it either on the inside or outside, Illustrator offsets the stroke in an odd manner. (See image for the three states: centered, inside, and outside.) However, there is a workaround where I first set the stroke to 2pt and align it as I want and then change the stroke back to 1pt and the behavior is as expected.
For something as basic as aligning a 1pt stroke, it seems odd to need to resort to a workaround.
View 2 Replies
ADVERTISEMENT
Jan 10, 2013
I created a profile for an alignment (which has 2 offsets) and also an assembly with two assembly offsets. I wanted to create a corridor where my assembly offsets will have the same profile but will be on different alignments (alignment offsets).
In the corridor properties / parameters, I got an error : duplicate profile found. Should I copy the profile (for each offset) in different profile views (for each offset) ? Or there is a better way to do that ?
View 2 Replies
View Related
Jan 21, 2013
I'm trying to set the stroke style for a path item I've drawn through JavaScript, however I can't find a way to set the stroke alignment for my path item.
I've checked the Illustrator JavaScript reference but I can't seem to find that option in there.I would expect something like:
pathItem.strokeAlignment = StrokeAlignment.OUTSIDE; // This doesn't work, what is the correct way to set the stroke alignment from JavaScript?
If I change the option in the Actions Panel it comes up as 'Set Stroke/Alignment: Outside', so there must be an equivalent way of setting it from JavaScript. Is there a way of converting Actions to JavaScript so you can see which properties and attributes are being set on the object? What is the correct way to set the strok alignment from JavaScript?
View 5 Replies
View Related
Sep 17, 2013
Is there a way to create a table of stations and offsets along a specific alignment at chosen locations?
Dynamic would be preferred.
I'm currently using version 2013.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
View 2 Replies
View Related
Sep 12, 2013
Is there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
View 1 Replies
View Related
Jan 4, 2013
I have a shape with a black stroke and green fill. I have a white line segment over it. How do I get it so that the end of the line segment doesn't show over the black stroke of the object? If I try to put the line segment behind the object, then the object fill hides it completely.
I'm new to illustrator and I've tried to search for an answer but I don't know the best way to accomplish what I want to do. Seems like some combination of transparency or knockout groups and I've read a bit about this and can't figure out what I need to do.
View 3 Replies
View Related
Mar 24, 2014
I need an outline on a stroke that i drew but when i apply object>path>outline stroke i keep getting my initial stroke applied as well. I only need the outline, not the initial stroke. I use Illustrator CC.
View 4 Replies
View Related
Mar 21, 2013
I have about 10 pictures and I want to change all of them in the same manner.I know there's a recording function somewhere that allows the user to apply the same effect to several photos at one time but I don't recall where it's at.
View 5 Replies
View Related
Apr 9, 2013
I'm trying to figure out a way to automate a simple, yet repetative process I do countless times a day. Ideally, I'd like to tie it to a keystroke to speed up my workflow.
I work on line art and colorways for footwear, so the way I'm coloring these shapes and strokes break apart the different materials and pieces of the shoe.
While coloring line art, I work with Pantone spot colors as fills for closed path objects. I then have to manually apply that same color to the stroke, set the stroke to 0.5px weight, convert that spot stroke color to CMYK, and add 15% to the K value.
I found some code in an older post for applying the actively selected object's fill color to the stroke, but I'm having but I'm having trouble with the next step of figuring out how to take that spot stroke color and convert it to a CMYK build that I can then add 15% black to. Is this something that's even possible? I've spent about an hour playing with the script and have only had luck matching the fill color or turning the stroke white.
View 13 Replies
View Related
Apr 6, 2012
Say I have a bunch of pictures, and I want to place each of them on a certain (bigger) background, is there a way to do this in an efficient manner instead of opening up each photo and manually putting it on the background and then saving them individually?
So for example, I have a bunch of pictures taken and they're say, 100x100. And I have this background that's say 150x150 and I want to have each photo with the background behind it. Is there any way I can do this efficiently? Photoshop CS3 on Windows XP SP3.
View 1 Replies
View Related
Dec 30, 2012
I am terribly worried because since I upgraded to Windows 8, Revit 2013 is no displaying the User interface in a correct manner. Many icons/commands are hidden and for example I want to edit a floor, click on it and the Edit boundary doesnt show up unless minimize the panel buttons but it doesnt show up in the expanded panel. Then, once you do it, the red cross and green check mark dont display either. You have to again look on the minimized panel buttons.
Then you finally find where the Edit bounday icon is, click on it, and the option for choosing the boundary lines dont show up and have to expand the panel button.It's been months since Windows 8 is out and Autodesk didn't update Revit to work properly under this new OS?Weird thing is that Revit 2011 seems to not have issues running on Windows 8.
View 9 Replies
View Related
Aug 2, 2013
I have an image that has a black stroke around it. I'm wanting to make that transparent and add a stroke to the outside of the black stroke, so it will basically be an invisible space there. Is that possible or is there an easier way?
View 1 Replies
View Related
May 8, 2012
My doubt is:
Ex) Do 3 offsets: .2; .7; .9
Is there any shortcut to do the offsets without 'esc'.
I'm doing like: o / .2 / select object / done / Esc / o / .7 / select object / done /...
View 8 Replies
View Related
Aug 12, 2013
Trying to create a shaft opening, but the top and bottom offsets are defaulting to 0'0", which automatically delivers an error message stating the obvious.. "the top of the opening is lower than the bottom of the opening or coincident with it..." Can't delete the element as one has not been created..
View 2 Replies
View Related
Aug 14, 2012
How do most people move points imported into a survey database that was shot with GPS and have offsets for trees, poles, signs, etc.
View 1 Replies
View Related
Nov 30, 2012
I'm looking for a way to determine (and preferably edit) the values of P1 and P2, the offsets of the initial tangents into the PC/PT of the shifted curve. It's not in the (admiteddly basic) book I have either.
[Edit: OK, after double-checking,I just found Widening offset clothoid, but I'm still none the wiser.]
View 1 Replies
View Related
Jun 4, 2011
I have about 20 models and I need to animate them where they all follow the first one, similar to the After Effects "Repeater" function.. Think 'chorus line' or 'kaleidescope'.. Is there a script or plugin that will automate this? Anything the first one does, the others follow, but with possible timing delays or offsets..
View 2 Replies
View Related
Mar 27, 2013
I need to make interchange shoulder widening for my sub assembly.
there is picture where I have the shoulder which I want to add target offset in corridor to make offset of the edge of shoulder. but I don't know how to write expression that when top link will offset slope will move with it and the bottom link will connect in crossing of this two points.
View 4 Replies
View Related
Nov 5, 2013
What I have is a highway that is being twinned, however the divided lanes are not consistantly the same distance away (or the same width of roadtop). I would like to keep the number of alignments to a minimum. Both lanes would be based off the same vertical profile. So I would like to have a single assembly that could adjust the median width in the center, and the lane width. Targetting the horizontal layout you can see in the attached screenshot. (this is not all of the job of course)
Is this a feasible task for the targetting assemblys? Would be a fairly standard 4:1 side slopes, adjustable ditch bottom width, 2% crowned road otherwise.
View 4 Replies
View Related
May 25, 2011
We have just started using Civil 3D. I need to be able to create an assembly that will place a sidewalk at varying offsets (it is too random to make seperate assemblies). I have tried making an alignment of the back of the walk and attempted to use targets in the corridor to achieve this .
I will attempt to attach the DWG that I am working on. The Main alignment is PR-1 as is the corridor and the alignment that i need the back of the walk to follow is PR-1 BWR.
View 9 Replies
View Related
Mar 21, 2013
I'm stuck with the attached drawing, was trying to get the right (side) view of the part constructed with lines and snaps/offsets are fighting me.
View 4 Replies
View Related
Feb 1, 2012
Im using MEP and in MEP2010 the Offset command worked fine on my structural members, offsetting to the direction I picked.
In MEP2012 the offset command now offsets the same structural member to the opposite side of the point I pick.
The structural member is rolled 180 and the way I can correct this offset issue is to roll the SM back to 0, then the offset command offsets to the correct side.
Is there a new setting or something in 2012 that will get the offset command behaving the way it did in 2010 where it does not care about the objects properties and just offsets it correctly?
View 9 Replies
View Related
Jan 29, 2014
I'm having a huge problem with the brush stroke, I use illustrator CS5,(on PC) but I can't set the stroke weight smaller or bigger than 1 pt.
1. I've already resetted AI preferences. still nothing.
2. I've already created new documents of all types ''web'', ''print'', ''basic rgb'', etc. and turned on and off the ''align new objects to pixel grid''. ( still nothing).
3. I've resetted my preferences file, under Unit/Stoke ( set to pixels instead of points). still nothing
4. I've already went to the Regional and Language Options and changed the decimal symbol but nothing.
View 3 Replies
View Related
Aug 23, 2013
I can't set the stroke of a path to anything less than 1 pt.
Though a dragged path (by an endpoint) snaps to a point on another path, when I lift my finger, the dragged point and path jump a small distance away.
Aligning two separate paths to their common (e.g. top left) endpoints also leaves the two endpoints slightly displaced from each other.
View 6 Replies
View Related
Mar 2, 2012
How do i do a stroke with a fadeout?
View 9 Replies
View Related
Jan 27, 2014
Just started working in Illustrator CC. I can't find the control to set stroke color.
View 2 Replies
View Related
Jun 4, 2010
All i want is to set a stroke width of 0.25 pt. When i select it, it just goes back to 1 pt. What gives????
View 6 Replies
View Related
Jul 22, 2013
In all my research of the new CC features in Illustrator I came across a video that was explaining you can now add a stroke on a placed image. My memory thinks it was a Deke McClellan video but i'm getting too old to rely on my memory being correct and I can't seem to find the video again.
I tried adding a stroke but nothing happeneds.. I still have to mask first then add a stroke.
View 6 Replies
View Related
Jul 13, 2013
I want to add some 2pt white strokes (no fill) to an Illustrator document to seperate some geometric paths, filled with color, into sections.
That works fine for rectange on the horizontal. But I also have some polygons that are on the diaganol.
How do I shape the ends of my stroke to match the diaganols? See attached for a close-up screen shot. The white is my 2pt stroke. I'd like it to terminate at the edge of the green path, not intrude into the orange.
View 2 Replies
View Related
Sep 12, 2013
Such a scenario:
1 Use the palette apperance can add a new strok to the object.
2 Now, to the stroke, I might add transformations.
3 I want to creatively find the amount of transformations. Turn to preview the changes.
4 Unfortunately, the slider is not precise and varies the size too much.
5 So I make the cursor to the field, and now controls the change of the unit using the keypad.
For example,
Shift + Arrow UP or Down - increments of 10 units
Alt + Arrow UP or Down - jump by one unit
CMD + Arrow UP or Down - jump about half of the
I do work in mm, I would be more precise if I can change the pitch CMD + UP or Down Arrow to jump about 1/10 the unit?
When working with a palette of transformations in view of the above, it is impossible to move the cursor selected object, such as it is in Photoshop when working with a palette of effects? Such a solution would be very fast and very creative.
View 5 Replies
View Related
May 28, 2012
i've made a serpantine curve that starts from one line of alignment and end on the other line.
i wanted to know how can c change alignment direction when these two feature line and alignment meet each other in order to change the alignment path?
View 3 Replies
View Related
