AutoCAD Civil 3D :: Different Alignment Offsets With The Same Profile
Jan 10, 2013
I created a profile for an alignment (which has 2 offsets) and also an assembly with two assembly offsets. I wanted to create a corridor where my assembly offsets will have the same profile but will be on different alignments (alignment offsets).
In the corridor properties / parameters, I got an error : duplicate profile found. Should I copy the profile (for each offset) in different profile views (for each offset) ? Or there is a better way to do that ?
I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
This is an odd one. When I have a 1pt stroke and try to align it either on the inside or outside, Illustrator offsets the stroke in an odd manner. (See image for the three states: centered, inside, and outside.) However, there is a workaround where I first set the stroke to 2pt and align it as I want and then change the stroke back to 1pt and the behavior is as expected.
For something as basic as aligning a 1pt stroke, it seems odd to need to resort to a workaround.
I imported Google earth surface (at eye alt 600m) to civil 3d 2012 and created an alignment of length 181m.
When I exported same alignment to Google earth , it showed the length as 190m ( the difference increases with increase in length of alignment) And also the profile view of the alignment in the Civil D & Google earth varies.
1/ I have spent alot of time setting up profiles so all the information on the profile are dynamic and to our company standards. I have created the alignments along the road centrelines and created the profiles for those alignments. Wouldn't you know it they made changes to the site plan. When I click on the alignment and select Edit Aligment Geometry, the Alignment Layout Tools come up but I can't select any of the tools to edit the alignment. Am I missing something.
2/ Can I create a new alignment called street A (revised) and associate it to the profile currently associated to street A (orig) so I don't have to rebuild all the profile labels etc?
Civil 3D 2013 Windows 8 Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz 32. GB 64-bit Oepration System, x64-based processor No Pen or Touch Input
I'm wanting to make a corridor model from an imported DGN that contains centerlines and edges of pavement for a neighborhood. From 2011 and 2012, the import creates splines while 2010 and older create 3d polylines. The alignment creation from objects does not work on a 3d polyline or spline and I have no clue how to make a profile from the same object. How could I go about making an alignment and profile from a 3d spline or 3d polyline?
Infrastructure Design Suite Premium 2014 Civil 3D 2014 x64 Windows 7 64-bit 6GB RAM
As we have a option of creating the profile from file ,by using that option we get PVI point but not the curves so every time want to copy a alignment from one profile to another in order to maintain the same levels in both the profiles using create profile from file options curves will not be copied but its pvi points will be displayed so i need to convert those pvi points to curves .
the other method of copying is by using superimpose profile option by doing so their is one problem arises that is in the copied profile if i want to see the details of the vertical geometry of that copied alignment the details of the curve will not be displayed in that band.
I have a centerline alignment defined from a polyline that starts at the middle of an existing T-intersection and starts with Sta 1+00.
When I draw the existing profile using this alignment I want it to show starting from Sta 0+50, while the plan view maintains a visible centerline starting at 1+00. I can get the grid to display the 'previous' 50 feet easily enough, but not the existing surface line(s).
I Created a Surface Profile along my existing survey alignment (Alignment 1). I copied that to a layout profile. I need to transfer that profile to an alignment I drew approximately 8 ft to the right (with less verticies - Alignment 2).
I created an offset alignment of Alignment 2 - Left 8 ft. I Created a Surface Profile from the 8 ft offset. Using that surface profile along Alignment 2 might be good enough, but I'd prefer to use the surface profile created from Alignment 1 because it represents my high point. I am creating a construction grade x-sec assembly that will run along (or 3-6 inches higher than the existing Centerline). But I want to hold Alignment 2.
I think what I need to do is to be able to hold Alignment 2, but use the Profile generated from Alignment 1 in my Corridor.
I created an alignment in one file. Then in another file I data shortcut that alignment in. From there I created an existing ground profile using that alignment. Later I modified the alignment. When I go into my profile drawing containing the existing ground profile, it did not update. I have had this happen on several projects and I can not figure out why it is not updating. My station range on the existing ground profile is set to automatic.
I used to do this all the time in 2012 and never had this problem. I am using 2013 with the latest update..
I need to know how to display a proposed profile elevation in the major station alignment label, I mean, for example, I want to read in the label "0+000, 494.444". I've already edited my major station label style adding a (profile type) Reference text, and it only displays "?". I suppose I need to associate it with the correct profile, but I've not figured out how to. I show you how the label looks in the attached image.
and I have tried it using {Station Value} instead of {Raw Station}
Here's what it's meant to do (because it's a long one):
If the station value + 5 is not divisible by 15, return -1 If the station value + 5 is divisible by 15, return the profile elevation, if the profile elevation is in the 100 range, subtract 100 if the profile elevation is in the 200 range, subtract 200...etc
Here is my conundrum: If I use the expression in a profile label, it works fine. But if I use it in an alignment label as reference text, it returns -1 for every value.
For an intersection, I am trying to create an alignment and profile from the Lane (edge of traveled way) of my main road for the intersection lanes to tie to. I just did this yesterday on this same corridor without any issue, but today it doesn't create the alignment correctly. It doesn't actually follow the feature line that I select. The alignment is in orange and the green line is the lane line. Notice that the alignment isn't following the lane line.
What would cause this? It worked fine doing the exact same thing yesterday, but today it's not.
Infrastructure Design Suite Premium 2014 Civil 3D 2014 x64 Windows 7 64-bit 6GB RAM
When I try to create a feature line using an alignment/ profile, sometimes it gives me a feature line for the entire alignment, even though my profile is only a small segment. I made sure I selected the correct profile, and I even deleted all other surface profiles just in case. But it still gives me a wonky feature line for the entire alignment.
However, in the same file, other profiles have worked perfectly.
We are working together with another firm here in town. The are doing the road and we are doing the utilities. They have established the alignments and profiles. When I import them all the data comes in. For whatever reason I do not have their profile views so I create my own profile view and put their profiles in them.
When they send an updated .xml file of all the alignments and profiles, they import okay but my profile views disappear. I assume it's because in their .xml file that I import, there are no profile view defined.
Is there an options when you export and alignment to an .xml file that you can include the profile views with it as well? This way when I import them I would get them.
Is there a way in C3D to add elevation information from a profile to an alignment label? What I'm trying to do is add labels to an alignment in a plan view with elevation information from a profile design associated with that alignment at a particular station. For example, the note would read:
ALIGNMENT B STA: 12+83.67 ELEV: 435.87
I can't figure out how to add any elevation data to the alignment note. I really don't want to have to create a section and a corridor surface, but that's the only way I can think of right now... and I'm not sure that would actually let me add a station and elevation in the same note in a plan view.
I have one surface "EG" and two alignments, I'll call 1 and 2. The profile view already has the alignment 1 surface projected on it. I go to profile>Create Surface Profile and select alignment 2, Surface EG, go to ADD it but the profile list is empty. Shouldn't it already be populated with alignment 1 and all I'm doing is adding 2 to it? Both alignments are in the same site.
Is there anyway to display Alignment Station Offset Label at Profile View because sometimes i want to display where is the phisical noze location in profile view also my attached file display what i have in my label and how display my label in profile view.
Some authorities (in Australia) require profile views to include diagrammatic representation of the curves, transitions and slopes. For example refer to the image below, which are from NSW Rail Corp guidelines. Similar information is required by some Council/Authorities for road projects.
Run profile on a self-intersecting street? The one I'm dealing with is a dead end 'P' shape. Logically, there are manholes in the intersection of the 'P', and logically to me, these structures need to show up in two places in the same profile view. Of course, C3D doesn't realize that I want a certain structure to show up twice, and I'm not sure how to communicate that information to it.
How to calculate the AREA of cut and fill analogous to the volume of cut and fill between surfaces, but instead only between the alignment and the road profile in the prolfile view. From what I've read of similar posts a few people have had the same question but have been instructed how to do it with volumes as opposed to area. Also how to insert a table of cut and fill area analogous to the one you can inset from the volumes dashboard.
Having a rough time with Pipe Networks! I am working an example from the Mastering C3D book (P. 371) as in the following steps:
1.Clicked SS structure(16)
2.Selected Create Alignment from Network on ribbon
3.Selected last structure(18), hit Enter
4.Changed options as needed in Create Align from Network - Create Profile and Profile View check box: Selected
5.Changed options and clicked Create Profile View
At this point the program pauses, then a dialog box trys to partially fill the screen but is all white then fades away as fast as it appeared and I'm stuck with a paperweight that beeps at me everytime I click the mouse, no panning or zooming response at this time. The command line is prompting me for the profile origin. I can switch to other apps and bring up TM and when I attempt to end C3D then it tells me that it can't because waiting for response. I can then cancel the prompt to save the drawing and C3D exits the active command and control is returned.
[URL]
Civil 3D 2013 SP 1, 64 bit Dell Precision T5600, 16 GB Win 7 Professional 64 bit Intel Xeon @ 2.0 GHz NVIDIA Quadro 4000
It is 27 miles of waterline broken into 3 mile segments.The problem is with the profiles that have been cut. The existing ground surface has been sampled along the alignment and multiple profile view made from that alignment. When the alignment changes, the only way that the surface seems to update is to run the "profiles; create profiles from surface command again" at which point it adds a new profile into the profile views reflecting the current surface over the alignment, then the "old" profile must be deleted from the profile views. Everything is set to dynamic, yet certainly is not being very dynamic.
I have some storm sewer alignments that I've put into profiles in C3D 2011. The pipe network that I used to create the alignments from is a reference created from a data shortcut. I've created profiles of these storm sewer alignments, and the station labels for the storm structures are displayed at question marks until I go into the structure properties for each structure and link it to the correct alignment.
The problem is that whenever I synchronize my data shortcuts because someone has updated something, all of the links in each structure to the alignments disappears and I am back to? for my stations in the profiles and I have to go go fix it again. how to keep this from breaking?
I do see this recent message [URL] that appears to be a similar problem, but it was said in that thread that this problem was introduced with C3D 2012, but I am using C3D 2011.....
