Using guides, I can create slices of multiple rectangles intersecting each other. For a web, I may have one picture on the top and multiple items below. If I use guides, the top picture gets cut into multiple pieces. Is there a way to merge them back into one piece? I probably can create a new guide on with only the top, but it's an extra step and the HTMLs from 2 attempts are not compatible with each other.
View 3 RepliesI'm a new user of GIMP. I have scanned a line plan that I need to modify in a series of multiple scans (plan is too large to scan in one image) and I need to recombine the multiple files back into one seamless image.
How does one accomplish this?
II have been creating rectangles using rec and because it is a polyline I get the "midpoint" nodes which I need to keep. I often have to modify these by increasing their length or shortening them, large numbers of them at times. Currently I have to select each "midpoint", of the rectangle, one at a time in order to change all of their lengths at one time.
1.jpg
6.jpg
I am trying to find a faster way to select the "midpoint" of several rectangles or some other way instead of the individual method that I have been using. I've tried trim, extend, and stretch. Maybe there is another that I am not considering.
Trim removes the bottom line completely and retains only 3 sides so this doesn't work.
4.jpg.
Extend does the same thing and stretch works very different than what I am trying to do.
This is my exercise:
6.jpg
7.jpg
8.jpg
Let us say that i have some rectangles with different sizes is there any way to offset one time.
View 9 Replies View RelatedHow can I save slices (referring to the lines and the dimensions - NOT the cut out images) from one PSD and import them into another PSD?
Â
I have 2 files (and will have more) with the same dimensions but similar artwork. I have created the slices in the first doc (master) and I want to bring all the slices (lines) over to the new file. I have seen other posts where you copy the layers from the second file into the master PSD (using SHIFT)
I have a logo for an organization I volunteer for that I guess was originally made in such a way that it consists of a large number of "slices" on top of each other. I don't mean slices in the same meaning as the tool in Illustrator, but rather separate, horizontal objects on top of one another that together form the logo. They are not overlapping but have common anchor points.
Â
Here is a crop of the logo file: [URL]....
Â
How do I merge these slices into one object? I'd like to clean up the logo and the paths are quite hard to modify as it is
In AutoCad in a drawing with multiple parts I use lines / rectangles to separate each part.
So the drawing gets clear.
How can this be done in Inventor?
With the lines connected to the border?
question regarding selecting multple parts of an image.
I have a landscape picture that I want to divide up into 5 parts.
I have managed to achieve the effect by using Image Ready and creating 5 seperate slices, then selecting these 5 slices, converting them to a selection, the cutting and pasting the selection to a new file. The trouble with doing this is that I have to create the slices every time for a new picture, and as I will be doing this type of work a lot, I would like to be able to call up the same selection or mask every time I work on a similar picture.
Is there a way I can save the selection mask, or slices, then recall them and apply it to the picture.
I created a 320 X 480 image and inside this image I am including the slices of 8 different images (320 x 50) - now how do I align them so that they are all nicely aligned.
Attached File(s)Â QuickDoc.png (10.05K)
Number of downloads: 5
I created three separate animated .gifs, and now I want to combine them so that they play back to back.
View 1 Replies View RelatedI have a editable poly with multiple elements (all '2D' on the same plane). Some of the elements intersect each other. How do I combine or merge them together?
See attached.
Combining multiple drawings in one go, I have 100 drawings (each has its layout) stored in 100 dwg files. I’m wondering if there is a way to combine them in one dwg file in one go assuming that they don’t overlap.
I need then to edit the title block of all of these layout knowing that this title block is an Xref.
I need to crop-remove slices of lots of of images, so preferably in one single step. Here is a more detailed description: [URL] Since this post is about two years old, I wonder whether this is still unsupported by Gimp.
View 2 Replies View RelatedI have two videos of the same event that I would like to switch between. There is audio to sync to the video as well.
What I wanted to do was:
1) Put the main video in the main video track
2) Put the audio in the music track and aling with the main video
3) Put the secondary video in the overlay track. Align it with the audio and set the overlay to cover the entire screen.
4) Cut out most of the overlay video (spit the clip into sections and delete most of them).
That worked as far as it went -- the main video shows, interspersed with the secondary video, and everything is aligned with the audio. The problem is that the change between video perspectives is quite aburpt, but I cannot figure out how to make the transitions be seamless.
I added transitions to the beginning and end of each small clip on the overlay panel, but that didn't really make things seamless, particularly at the end of the clip -- there isn't anything to cross cut to, and if it fades to black then the main video pops up immediately when the overlay clip ends.
I tried splitting the video in the main track at the spot where the overlay comes in and adding a transition to the end of it; no matter what i try with the ripple settings, that throws the audio out of sync when the overlay is finished. I also tried deleting that section in the video track and moving the video from the overlay track into the video track; that was difficult enough to make sure that the sections were exactly the same length, but then I still have the problem with the transition lengthening the clip and throwing off the audio. I guess I could somehow figure out how to trim exactly the right amount of time from the clip I am inserting to solve that problem. Really, I guess I'd have to do that twice -- once for each transition -- because if otherwise the audio would be off in the clip being inserted. So I need to trim 1 second (or whatever) from the beginning; split it somewhere, and then trim 1 second from the end.
I searched the forums briefly and couldn't find an answer to a couple annoying problems I've been having with Photoshop. I'm running a PC with Photoshop CS2, which is part of the entire creative suite package that I recently purchased. Here are the two issues that I’m trying to tackle.
1) Combining multiple paths
I have a picture of a car and I’ve painstakingly traced a path around the outer perimeter, but then there are other areas that I’d like to include as part of the same path and I can’t seem to find out how to make this happen. Just to be clear, I select a path around the outside of the car so I can place it into a new background, put in some shadows, etc.
But, when I try to select other areas of the image to include as part of the path (say between the spokes of the wheels) so the new background shows through as well, it creates a separate path. I’ve yet to figure out how to combine each into a single path file so when I attempt to create an effect, I don’t have five different paths to tackle. A similar scenario cropped up (pardon the pun) when I try to do a radial blur on the wheels and a motion blur to create the appearance of motion. I simply can’t figure out how to get the paths into a single file.
2) When manually adjusting levels of an image, the three eye-droppers that allow you to set white, grey and black points can be used, for example to select which part of the image should be the brightest white (in the case of “set white point”). When I use this eye dropper, it keeps changing the foreground color in the toolbar.
Does anyone have any ideas on how to prevent that from happening? This is rather annoying because when I try to expand the canvas size and I’m expecting it to be white, it ends up being and off shade of white because it picked up the color of the background that I selected as what should be the brightest white in my image. I know the long work around, but am I missing a default setting that would prevent this from happening?
I'm fairly new to the AutoCAD API for .NET, and for the last month or so I've been googling about, looking for comprehensive documentation on the Autodesk API (their equivalent of man pages). I've yet to find anything that describes each method and class in the API.
My goal is this: I'm trying to figure out how to copy the contents of all drawings in the same directory into a single dwg file. What subsets of the AutoCAD API should I use to do so?
I am creating my Final Grading surface with from 2 surfaces - a proposed road surface and a proposed grading surface. (Note of roads within the road surface)
The issue is that when I paste the proposed road surface (that consists of several looped sections) over the proposed grading surface, the proposed grading surface within the looped road areas dissappears.
I have tried several options using boundaries for the inner looped areas on my road surface, and has altered my order of opterations for my final surface edits, and many other things also.Â
I have attached an image for reference.
I have uploaded two images to gimp and have made minor changes to parts of each image (erased). Now I want to combine those changed parts in one image. How do I do that?
View 1 Replies View RelatedI'm trying to create images of pairs of cards from png images of a deck of playing cards, basically I would like to combine two cards into a single image, i.e. have the A clubs with the King clubs for AcKc (attached), I would like to do this for all starting hands if you're familiar with poker (AA,KK..72 etc)
Lastly, I would like to change the color of the diamonds and clubs suits from red to blue and black to green respectively, without affecting the black border.
Attached File(s)Â king_of_clubs2.png (256.97K)
Number of downloads: 7
I want to know how to insert a customized/colorful font like the one seen in the attached picture (Darknet). How do I do this with a generic stock image using GIMP? I want to create titles for my books using fonts that are relevant to the book title.
Lets say I want to use a woman's face/body from one stock photo image and transplant it into another stock image (just the face/body even though there are other elements in the background.
Is this possible with Gimp? What I want to do is combine the two. For instance, a picture of a galaxy of stars and then paste the image of the woman onto it.
Attached File(s)Â cover - Darknet.jpg (88.12K)
How do you combine 2 pictures to make it appear that an item is being held in the hand/hands so that the fingers actually appear in front of the item I choose to place in said hands?
View 4 Replies View RelatedI am trying to combine these two images (I want to keep the very top of the first image but I like the second image better...there is just not enough of her hand). How would I be able to accomplish this while also getting the perspectives to match up? I can get the hand looking ok, but then the rest of the image is funky because nothing else matches.
View 3 Replies View RelatedI have multiple singular text objects on my screen and I want to convert them to mtext so I can use the Background Mask option within mtext on my drawing. how to quickly select all the text and convert it to mtext without it combinin ginto 1 mtext?
View 9 Replies View RelatedUsing the Roland GX-24 plotter to cut vinyl and the Illustrator print to plotter plug-in, the program refused to cut rectangles. (with the exception of lower case i's) This includes Capital I's, lower case l's, hyphens and rectangles using the rectangle tool.
Â
All other letters have no issue cutting. So long as they're not a single rectangle. This anomaly was experienced using several files, tested on old and new. So its not an issue with the file.
Let me start by saying I am not an AutoCAD wiz by any means. Â I have AutoCAD LT 2013 at my work and for the last year I have used it with no issues same as I have for the last 10 with previous versions.
This morning I came in and I cannot pan with my scroll wheel or double click the scroll wheel to zoom to extents. Â I have tried checking the settings for the wheel for pan and zoom and they are both at "1"
Whats even more frustrating is now all of a sudden I cannot enter dimensions for rectangles and other items with the small boxes that usually show up next to my item on the workspace (20" - "tab" - 12" - enter to get a 20x12 rectangle for example).
I have gone through every option section; I have tried rebooting my computer; I have looked at the settings for the mouse and nothing seems to do anything.
I use the rectangle tool to draw two rectangles where I use blending options to set opacity to 0 (no fill). But when I draw the second rectangle the first one disappears. How do I see both rectangles at the same time?
Another thing. How do I change linesize for the borders for the rectangle?
how to bend a rectangle around a circle?
View 6 Replies View RelatedHow do you make strict 1-2px wide *rectangles* in photoshop? Whenever I do that, PS antialiases them badly
View 5 Replies View RelatedWhen I erase in Photoshop part of a drawing, gray rectangles appear. How can I eliminate them? In other words: every time I erase something, text or drawings, those gray rectangles appear. Is there a way to erase something leaving that part just white, so there I can write or draw whatever is needed?
View 7 Replies View RelatedI'd like to not have to manually update every base/projected view to see what's included on an idw...
Using Inventor professional 2013. HP laptop with Win7 64-bit and Quadro card.
picking up Illustrator again and the first thing I did was create and fill a few rectangles.
However, the rectangles have a gray border to them.