GIMP closed while I was in the middle of saving an image and is now telling me that the xcf is corrupt and that there is no usable data in it even though the file is the same size as it was before the crash. This is the third or fourth time it's done this to me. I'd include the file but this is the first time I've posted here and I don't know how
View 6 RepliesI try to save a .jpg or .png, the image file is corrupted. With JPEG's, it'll display most of the image, and then the rest will be just grayed out. With PNG's, I will get just a Red X in Internet Explorer, and a "image cannot be displayed because it contains errors." in Firefox.
View 1 Replies View RelatedI have an image with many layers. I want to cut a vertical strip out of the middle of one of the layers because I want to narrow the transparent gap between the left side of that layer and the right side. That is, my image has stuff on the left side and stuff on the right and a gap in the middle through which shows the pattern in the layers below, and I want to narrow that middle gap. I want to do the same thing as cutting a vertical strip down the middle of that top layer with scissors so I can scrunch the sides together, so less of the patterns on the layers behind shows through.
Is there any way to do this? It doesn't work when I simply select the area I want to cut and click "cut" or "clear" - those commands don't get rid of the canvas in that section, just the contents, which are transparent anyway.
I'm trying to avoid resizing the canvas and then laboriously reconstructing the layer with all the finicky alignment issues, because that seems unnecessarily time-consuming, when all I need to do is remove a gap in a blank section. I tried using guides to guillotine the image, but that, too, is turning out to be time-consuming in terms of reassembling the image. I know I must be missing something obvious - how does one simply remove a selection of the canvas (and not of the image itself) with the selection tool?
I have a nice image that has lost the red channel histogram data for about half of the image. It can still be viewed, and the preview is correct.
Can I copy the histogram data from the red channel of the non-corrupt portion of the image? I know it's the red channel because when I open the color data from the corrupted portion the red channel is literally non-existant.
Programme: X4
System: Windows 7 Ultimute 64bit
Installed 01/01/2012 with SP1.
Problem: When I save jpeg files some of them become corrupt and will not open.
I have been using PSP for a number of years and decided to upgrade to X4, now a number of the files that I save in PSP are becoming corrupted and they seem to all be photos which are shot using a pure white background, not all photos are affected, I never had this problem in my previous versions of PSP
I use adobe lightroom which I transfer my raw file into jpeg, this is where i then open the jpeg in X4 and do my main editing, it is when I save the image it saves corrupted and can not be opened or deleted (shows that X4 is still using the file) . it will also not allow me to re transfer the image from my catalog.
There are some good features and I am considering uninstalling and reverting back to my older program (X2).
This may be an issue with the metadata of the image, I exported 2 sets of 50 identical images 50 with and 50 without the Metadata and ran a script which then automatically save the image, about 20 of the images with the metadata ended up corrupted, all the images without the metadata saved fine.
iu accidently close a drawing that i had been working on with out saving... is there a way that i can recover the work that was not saved?
View 9 Replies View RelatedWhilst closing autocad,I have managed to lose all the work I had created------! The file when opened just comes up blank and no back-up seems to exist.
View 9 Replies View RelatedI am using a macbook pro. Every time i go to export an image I have resized, or modified, the name field does not let me use most of the keyboard. Some of the keys work but most dont in that field.
View 1 Replies View RelatedThis keeps happening where I have an image, I edit it, I press ctrl+S, but when I upload the image the edited version is not uploading the original version is?? I have to save it as ctrl+shift+s. This sucks because now I have 3 or 4 of the same image all saved differently which gets to be pretty inconvenient.
View 2 Replies View Relatedim making an animation with gimp and then i saved it. but now i want to add more layers and paste these images on buuutt when i paste the colors are all faded and weird, does this have something to do with like indexed images or something?
View 3 Replies View RelatedAs a recent user of Photoshop, I need to attach details such as keywords to an image. This will usually be a TIFF or JPEG.. I'm new to Gimp but see in the Properties category I can enter the sort of info I want but when I try to save everything this info just disappears and obviously is not embedded in the file.
View 2 Replies View RelatedI made a complicated selection, which I saved to a channel. Then I inverted the selection and tried to delete the inverse (hopefully to transparency, but deleting to a background color would be better than not deleting at all). However, nothing happens when I press the delete key, or when I select "Clear" from the edit menu. Trying to use the Cut command doesn't work, either.
After deselecting, I can get the selection back through the channels dock, by right-clicking and then choosing "Channel to selection" or "Add to selection." It appear to replace the selection from the channel properly. I just can't delete anything.
I'd like to get areas from all closed loop polygons of my drawing and save them.
From my point of view, the function would be to:
- hatch every polygon of my drawing
- for each hatch do
- extract area and put it in an array with the variables (name of polygon and area).
And then is it possible to save it in a DWG or DXF file in order to reuse these areas by another program ?
I'm using Gimp on very very large image files, my current image is 22000 x 23000. Gimp has 24GB of memory assigned in the Preferences menu (out of 32) and is fine while editing. However whenever I save the image as an XCF or PSD it corrupts. Occasionally with an XCF it will be recoverable but only one layer will recover. If it's exported as a PSD next time I try to open the image it says there are too many layers and is corrupt.
Is this a bug or is there a way I can preserve my large images with layers?
Recovering a gimp file that got corrupted. My computer crashed at the wrong moment of time. It only saved 1 layer and nothing else.
View 1 Replies View RelatedI have an image with many layers. I want to cut a vertical strip out of the middle of one of the layers because I want to narrow the transparent gap between the left side of that layer and the right side. That is, my image has stuff on the left side and stuff on the right and a gap in the middle through which shows the pattern in the layers below, and I want to narrow that middle gap. I want to do the same thing as cutting a vertical strip down the middle of that top layer with scissors so I can scrunch the sides together, so less of the patterns on the layers behind shows through.
Is there any way to do this? It doesn't work when I simply select the area I want to cut and click "cut" or "clear" - those commands don't get rid of the canvas in that section, just the contents, which are transparent anyway.
I'm trying to avoid resizing the canvas and then laboriously reconstructing the layer with all the finicky alignment issues, because that seems unnecessarily time-consuming, when all I need to do is remove a gap in a blank section. I tried using guides to guillotine the image, but that, too, is turning out to be time-consuming in terms of reassembling the image. I know I must be missing something obvious - how does one simply remove a selection of the canvas (and not of the image itself) with the selection tool?
I'm trying to put a pattern around an object that needs alpha channel in the middle, but when I make a new layer and add the pattern, then select the area and use "Color to Alpha" it doesn't work. The pattern in that area is only turn slightly darker, not alpha channel.
View 1 Replies View RelatedI'm trying to make a sort of neon glowing circle with text in the middle it's mainly the circle.
View 1 Replies View RelatedHow to change the zoom in and out behaviour of the middle mouse wheel in Windows GIMP to work without having to press the ^ (control) button on the keyboard? I'm using to zooming in and out using just the mouse wheel alone and hoping that a setting in GIMP could be changed so that it also works without pressing the ^ (control) button at the same time.
I've googled this along with a few other things over last couple of days but no luck. Can this be done?
ill be working on a project for about an hour and ill pres enter after moving it and it will just crop out the middle of the image? even if i dont press save, it will reopen and still be gone. it also effects not just the image i was working on but some of my other projects from photoshop im doing.
View 20 Replies View RelatedI am evaluating x6 and considering upgrading. I have been a daily Corel user since the 1990's and usually do every-other upgrades.
Anyhow, I am having a problem exporting TIFF images. The bottom part of the image is corrupt. White band. Interesting, if I open the TIFF in Corel PhotoPaint it's perfectly fine and fancy, but If I preview in Explorer I get the band, emailing it the recipient complains about the white band which obliterates the bottom 100px or so.
As far as I know the Adobe TIFF spec has not changed since 1991, maybe 1996..
So is this a limitation with the trial upgrade or a bug or a weird harold situation?
Everything else seems great, I'm excited about running corel 64 bit on an 8 core machine with 16 gb, It does seem like there have been some things removed which were previously very useful for production, and now they are gone or perhaps just missing. For example, how do i pop out the pallette and see all the colors at once? I think now I have to scroll at the bottom and it's annoying as heck.
Yes, I'm new to Illustrator. Every time I open up a previously made image, usually a jpg of an illustration I did by hand, there is an outline of a rectangle right in the middle of my image. I have no doubt I put it there while doing something else. But, now it shows up in all the images I open in Illustrator. What I might have done to create this, and better yet, how I can get rid of it? I'm using Illustrator CS4.
View 10 Replies View RelatedIs there a way to get back all of your layers once you save a file andclose out of it? I am new and am creating magazince covers - All I need todo is change the pic - but did not want to have to re-create the entirecover if I did not need too...
View 15 Replies View RelatedI need to edit several video frames in order to blur someone's face in the video and it would be useful to "enqueue" files. What I would like to obtain is that when I have edited, saved and closed image1, GIMP would automatically open image2 and so on.
View 5 Replies View RelatedWhen I try to add a rating to an image, i get an error message: the requested change could not be completed because the catalog is corrupt. You can attempt to repair in file - catalog.
View 1 Replies View RelatedYesterday, before I got the problem, I got the toolbox AND the other toolbox, on the left and right, excactly as how I got it in the first time I got GIMP. But the next day, all I see was a blank screen on the GIMP, I check the "Windows" menu, go to the "Recently closed docks" and said "empty", it got erased completely on the tool only. The grid level, my other files, ect. is there, but the toolbox is completely erased for no reason.
View 6 Replies View RelatedI have used PEDIT to join multiple polylines, which now appear as polylines. But when I use QSELECT to show all open (non-closed) section, one polyline still shows up as open.
I've attached the file I'm working on. The polyline in question is the green outline on the object on the right.
i want to have multiple offsetoutlines on a closed or non-closed path. with "offset path" i can make only one additional outline but i need multiple?
i searched all over the net for answers with no success.
I would like to apply a gradient inside closed path with black at the outside transitioning to white at the center. I
View 2 Replies View RelatedIn develop mode in LR 4.4 I get a small line through the middle of the image preview box in the navigation panel.
Why and how I might get rid of it? I used to get it in 4.3 and 4.1 too.
I'm using an iMac with CS6. I have an external Maxtor 1TB drive that is 13 months old. when I attempted to access a PSD file from the drive and received an error message telling me that the document was not a valid photoshop file. I looked at the directory at this point and noticed that the preview icons for many of the photoshop and jpg files on the drive were disabled. In each of these cases, the files will not open.
I have:
1. Repaired permissions and volumes on the external drive.
2. Changed the file extension and attempted to open.
3. Opened the file in a hex editor and looked for extra lines of code, or text, or whatever.
4. Copied the file to a different drive.
5. Attempted to open in a different program (Preview, Illustrator)
In no cases will the files open, and I'm stumped. The drive itself seems to be working fine. Not every file is affected, and the files that are affected are both in a variety of locations on the drive and were created over a period of years.